Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

Conducted electron microscopic investigation of the primary remex fine structure of thirteen species of Owls (Strigiformes), using a scanning electron microscope (SEM). It is shown that Owls (Strigiformes) have a number of specific primary remex microstructural characteristics. First of all, these are the features of the structure of the pennaceous barb: a cross section configuration, a pith architectonics on the cross section and longitudinal sections, a cuticular structur of the barb. A number of the unique features in the microstructure of the vanules of the pennaceous barb have been found for the first time (at the scanning electron microscope level, at a large SEM magnification). First of all, these are the structural features of the distal barbules and the structure of the apical portion of the barb with the elongated proximal barbules and the distal barbules tightly contiguous to the ramus and closed with each other. Mentioned characteristics make for the thick velvet-like dorsal surface of the vane and the presence of a complex of peculiar “bunches” (fringes) forming the cleft edge (a fringed edge) of the inner vane – exceptionally specific adaptive characteristics in Strigiformes. Рresentenced original research results suggest that Owls (Strigiformes) have a number specific microstructural characteristics of the primary remex and also a number of the unique features in the microstructure of the primary remex which reflecting the ecological and morphological adaptations conditioned by the flight specificity.

Download Full-text

CHARACTERISATION OF BIOMEDICAL TITANIUM LAYERS DEPOSITED BY A VACUUM PLASMA SPRAY PROCESS

Materiali in tehnologije ◽

10.17222/mit.2020.135 ◽

2021 ◽

Vol 55 (2) ◽

pp. 231-235

Author(s):

Mihailo Mrdak ◽

Darko Bajić ◽

Darko Veljić ◽

Marko Rakin

Keyword(s):

Electron Microscope ◽

Scanning Electron Microscope ◽

Hardness Test ◽

Optical Microscope ◽

Mechanical Tests ◽

Test Method ◽

Bonding Layer ◽

Vacuum Plasma Spray ◽

Porous Ti ◽

Scanning Electron

In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we used HÖGANÄS Ti powder labelled as AMPERIT 154.086 -63 µm. In order to test the mechanical properties and microstructure of the VPS-Ti coating, the powder was deposited on Č.4171 (X15Cr13 EN10027) steel substrates. Mechanical tests of the microhardness of the coating were performed by the Vickers hardness test method (HV0.3) and tensile strength by measuring the force per unit area (MPa). The microhardness of the coating is 159 HV0.3, which is consistent with the microstructure. The coating was found to have a good bond strength of 68 MPa. The morphology of the powder particles was examined on a scanning electron microscope. The microstructure of the coating, both when deposited and etched, was examined with an optical microscope and a scanning electron microscope. By etching the coating layers, it was found that the structure is homogeneous and that it consists of a mixture of low-temperature and high-temperature titanium phases (α-Ti + β-Ti). Our tests have shown that the deposited layers of Ti coating can be used as a bonding layer for porous Ti coatings in the production of implants.

Download Full-text