Evaluation of Fiber–Matrix Bond in the Mechanical Behavior of Geopolymer Composites Reinforced with Natural Fibers

2019 ◽  
Vol 8 (3) ◽  
pp. 20180136 ◽  
Author(s):  
Ana Carolina Constâncio Trindade ◽  
Paulo Henrique Ribeiro Borges ◽  
Flávio de Andrade Silva
Keyword(s):  
Mechanical Behavior ◽  
Natural Fibers ◽  
Fiber Matrix ◽  
Geopolymer Composites

Mechanical Behavior of Synthetic/Natural Fibers in Hybrid Composites

2020 ◽  
pp. 129-146
Author(s):  
Navasingh Rajesh Jesudoss Hynes ◽  
Ramakrishnan Sankaranarayanan ◽  
Jegadeesaperumal Senthil Kumar ◽  
Sanjay Mavinkere Rangappa ◽  
Suchart Siengchin
Keyword(s):  
Mechanical Behavior ◽  
Hybrid Composites ◽  
Natural Fibers

scholarly journals Critical Review of the Parameters Affecting the Effectiveness of Moisture Absorption Treatments Used for Natural Composites

2019 ◽  
Vol 3 (1) ◽  
pp. 27 ◽  
Author(s):  
Ahmad Al-Maharma ◽  
Naser Al-Huniti
Keyword(s):  
Moisture Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Complete Discussion ◽  
Natural Composites ◽  
Review Study ◽  
Fiber Matrix ◽  
Physical Treatments ◽  
The Cost ◽  
High Degree

Natural composites can be fabricated through reinforcing either synthetic or bio-based polymers with hydrophilic natural fibers. Ultimate moisture absorption resistance at the fiber–matrix interface can be achieved when hydrophilic natural fibers are used to reinforce biopolymers due to the high degree of compatibility between them. However, the cost of biopolymers is several times higher than that of their synthetic counterparts, which hinders their dissemination in various industries. In order to produce economically feasible natural composites, synthetic resins are frequently reinforced with hydrophilic fibers, which increases the incompatibility issues such as the creation of voids and delamination at fiber–matrix interfaces. Therefore, applying chemical and/or physical treatments to eliminate the aforementioned drawbacks is of primary importance. However, it is demonstrated through this review study that these treatments do not guarantee a sufficient improvement of the moisture absorption properties of natural composites, and the moisture treatments should be applied under the consideration of the following parameters: (i) type of hosting matrix; (ii) type of natural fiber; (iii) loading of natural fiber; (iv) the hybridization of natural fibers with mineral/synthetic counterparts; (v) implantation of nanofillers. Complete discussion about each of these parameters is developed through this study.

scholarly journals Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Carlos Medina ◽  
Eduardo Fernandez ◽  
Alexis Salas ◽  
Fernando Naya ◽  
Jon Molina-Aldereguía ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Fracture Toughness ◽  
Shear Strength ◽  
Mechanical Behavior ◽  
Matrix Interface ◽  
Short Beam ◽  
The Matrix ◽  
Fiber Matrix Interface ◽  
Fiber Matrix

The mechanical properties of the matrix and the fiber/matrix interface have a relevant influence over the mechanical properties of a composite. In this work, a glass fiber-reinforced composite is manufactured using a carbon nanotubes (CNTs) doped epoxy matrix. The influence of the CNTs on the material mechanical behavior is evaluated on the resin, on the fiber/matrix interface, and on the composite. On resin, the incorporation of CNTs increased the hardness by 6% and decreased the fracture toughness by 17%. On the fiber/matrix interface, the interfacial shear strength (IFSS) increased by 22% for the nanoengineered composite (nFRC). The influence of the CNTs on the composite behavior was evaluated by through-thickness compression, short beam flexural, and intraply fracture tests. The compressive strength increased by 6% for the nFRC, attributed to the rise of the matrix hardness and the fiber/matrix IFSS. In contrast, the interlaminar shear strength (ILSS) obtained from the short beam tests was reduced by 8% for the nFRC; this is attributed to the detriment of the matrix fracture toughness. The intraply fracture test showed no significant influence of the CNTs on the fracture energy; however, the failure mode changed from brittle to ductile in the presence of the CNTs.

scholarly journals A Review on Natural Fiber-Reinforced Geopolymer and Cement-Based Composites

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4603
Author(s):  
Marfa Camargo ◽  
Eyerusalem Adefrs Taye ◽  
Judith Roether ◽  
Daniel Tilahun Redda ◽  
Aldo Boccaccini
Keyword(s):  
New Technologies ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Industrial Applications ◽  
Synthetic Fiber ◽  
Matrix Interface ◽  
The Matrix ◽  
Fiber Matrix Interface ◽  
Fiber Matrix

The use of ecological materials for building and industrial applications contributes to minimizing the environmental impact of new technologies. In this context, the cement and geopolymer sectors are considering natural fibers as sustainable reinforcement for developing composites. Natural fibers are renewable, biodegradable, and non-toxic, and they exhibit attractive mechanical properties in comparison with their synthetic fiber counterparts. However, their hydrophilic character makes them vulnerable to high volumes of moisture absorption, thus conferring poor wetting with the matrix and weakening the fiber–matrix interface. Therefore, modification and functionalization strategies for natural fibers to tailor interface properties and to improve the durability and mechanical behavior of cement and geopolymer-based composites become highly important. This paper presents a review of the physical, chemical and biological pre-treatments that have been performed on natural fibers, their results and effects on the fiber–matrix interface of cement and geopolymer composites. In addition, the degradation mechanisms of natural fibers used in such composites are discussed. This review finalizes with concluding remarks and recommendations to be addressed through further in-depth studies in the field.

Mechanical Behavior of Rubberized Geopolymer Composites

2021 ◽  
pp. 1-24
Author(s):  
Krissanapat Yomthong ◽  
Suthee Wattanasiriwech ◽  
Darunee Wattanasiriwech
Keyword(s):  
Mechanical Behavior ◽  
Geopolymer Composites

Improvement of Fiber-Matrix Adhesion of Vegetable Natural Fibers by Chemical Treatment

2021 ◽  
pp. 153-177
Author(s):  
Fatima-Zahra Semlali Aouragh Hassani ◽  
Zineb Kassab ◽  
Mounir El Achaby ◽  
Rachid Bouhfid ◽  
Abouelkacem Qaiss
Keyword(s):  
Chemical Treatment ◽  
Natural Fibers ◽  
Matrix Adhesion ◽  
Fiber Matrix

Review of Natural Fiber Reinforced Elastomer Composites

2018 ◽  
Author(s):  
Pantea Kooshki ◽  
Tsz-Ho Kwok
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Surface ◽  
Specific Strength ◽  
Elastomeric Matrix ◽  
The Matrix ◽  
Fiber Matrix ◽  
Physical Treatments

This paper is a review on mechanical characteristics of natural fibers reinforced elastomers (both thermoplastics and thermosets). Increasing environmental concerns and reduction of petroleum resources attracts researchers attention to new green eco-friendly materials. To solve these environmental related issues, cellulosic fibers are used as reinforcement in composite materials. These days natural fibers are at the center of attention as a replacement for synthetic fibers like glass, carbon, and aramid fibers due to their low cost, satisfactory mechanical properties, high specific strength, renewable resources usage and biodegradability. The hydrophilic property of natural fibers decreases their compatibility with the elastomeric matrix during composite fabrication leading to the poor fiber-matrix adhesion. This causes low mechanical properties which is one of the disadvantages of green composites. Many researches have been done modifying fiber surface to enhance interfacial adhesion between filler particles and elastomeric matrix, as well as their dispersion in the matrix, which can significantly affect mechanical properties of the composites. Different chemical and physical treatments are applied to improve fiber/matrix interlocking.

Plasticized wheat gluten reinforcement with natural fibers: Effect of thermal treatment on the fiber/matrix adhesion

2008 ◽  
Vol 39 (12) ◽  
pp. 1787-1792 ◽  
Author(s):  
Thiranan Kunanopparat ◽  
Paul Menut ◽  
Marie-Hélène Morel ◽  
Stéphane Guilbert
Keyword(s):  
Thermal Treatment ◽  
Wheat Gluten ◽  
Natural Fibers ◽  
Matrix Adhesion ◽  
Fiber Matrix
Sign in / Sign up

Export Citation Format

Share Document