Integer order vs fractional order temperature models in the forced air heating system

2019 ◽  
Vol 1 (11) ◽  
pp. 37-42 ◽  
Author(s):  
Krzysztof OPRZĘDKIEWICZ
Keyword(s):  
Fractional Order ◽  
Heating System ◽  
Integer Order ◽  
Air Heating ◽  
Forced Air

scholarly journals The Fractional Order PID Control of the Forced Air Heating System

2019 ◽  
Vol 23 (1) ◽  
pp. 5-10 ◽  
Author(s):  
Krzysztof Oprzędkiewicz ◽  
Maciej Podsiadło
Keyword(s):  
Fractional Order ◽  
Pid Control ◽  
Heating System ◽  
Air Heating ◽  
Forced Air ◽  
Fractional Order Pid

ARX Model of a Residential Heating System With Backpropagation Parameter Estimation Algorithm

2017 ◽  
Author(s):  
Eric M. Burger ◽  
Scott J. Moura
Keyword(s):  
Ventilation System ◽  
Thermal Characteristics ◽  
Residential Building ◽  
Estimation Algorithm ◽  
Heating System ◽  
Arx Model ◽  
Residential Heating ◽  
Air Heating ◽  
Parameter Estimation Algorithm ◽  
Forced Air

Model predictive control (MPC) strategies hold great potential for improving the performance and energy efficiency of building heating, ventilation, and air-conditioning (HVAC) systems. A challenge in the deployment of such predictive thermo-static control systems is the need to learn accurate models for the thermal characteristics of individual buildings. This necessitates the development of online and data-driven methods for system identification. In this paper, we propose an autoregressive with exogenous terms (ARX) model of a thermal zone within a building. To learn the model, we present a backpropagation approach for recursively estimating the parameters. Finally, we fit the linear model to data collected from a residential building with a forced-air heating and ventilation system and validate the accuracy of the trained model.

scholarly journals Intraoperative body temperature control: esophageal thermometer versus infrared tympanic thermometer

2016 ◽  
Vol 50 (6) ◽  
pp. 946-952 ◽  
Author(s):  
Vanessa de Brito Poveda ◽  
◽  
Ariane de Souza Nascimento ◽  
Keyword(s):  
Repeated Measures ◽  
Room Temperature ◽  
Digestive System ◽  
Heating System ◽  
Temperature Measurements ◽  
Oncologic Surgery ◽  
Air Heating ◽  
Intraoperative Period ◽  
Forced Air ◽  
Two Temperature

Abstract OBJECTIVE To verify the correlation between temperature measurements performed using an infrared tympanic thermometer and an esophageal thermometer during the intraoperative period. METHOD A longitudinal study of repeated measures was performed including subjects aged 18 years or older undergoing elective oncologic surgery of the digestive system, with anesthesia duration of at least 1 hour. Temperature measurements were performed simultaneously by a calibrated esophageal thermometer and by a calibrated infrared tympanic thermometer, with laboratory reading precision of ±0.2ºC. The operating room temperature remained between 19 and 21ºC. RESULTS The study included 51 patients, mostly men (51%), white (80.4%). All patients were kept warm by a forced-air heating system, for an average of 264.14 minutes (SD = 87.7). The two temperature measurements showed no different behavior over time (p = 0.2205), however, tympanic measurements were consistently 1.24°C lower (p<0.0001). CONCLUSION The tympanic thermometer presented reliable results but reflected lower temperatures than the esophageal thermometer.

Performance analysis of domestic solar air heating system using V-shaped baffles – An experimental study

2021 ◽  
pp. 095440892110162
Author(s):  
Vijayakumar Rajendran ◽  
Harichandran Ramasubbu ◽  
Karthick Alagar ◽  
Vignesh Kumar Ramalingam
Keyword(s):  
Experimental Study ◽  
Performance Improvement ◽  
Mass Flow ◽  
Thermal Efficiency ◽  
Heating System ◽  
Solar Air Heater ◽  
Absorber Plate ◽  
Air Heating ◽  
Mass Flow Rates ◽  
Carbon Dioxide Mitigation

An experimental study has been carried out to enhance a solar air heater’s performance by integrating artificial roughness through baffles on the absorber plate. In this paper, the thermal and energy matrices analysis of a Solar Air Heater (SAH) roughened with V up perforated baffles have been investigated. The effect of various mass flow rates on the SAH was analyzed with and without baffles. Experimental outputs like outlet air temperature, useful energy (heat) gain and thermal efficiency were evaluated to confirm the performance improvement. The baffled absorber plate SAH was found to give the maximum thermal efficiency and useful energy gain of 89.3% and 1321.37 W at a mass flow rate of 0.0346 kg/s, 13% and 12% higher than SAH without baffle. This result showed that the V up-shaped ribs in flow arrangement provide better thermal performance than smooth plate SAH for the parameter investigated. Energy matrices analysis and carbon dioxide mitigation of the SAH system were also analyzed.

scholarly journals Energy Saving and Charging Discharging Characteristics of Multiple PCMs Subjected to Internal Air Flow

Fluids ◽  
2021 ◽  
Vol 6 (8) ◽  
pp. 275
Author(s):  
Ahmed J. Hamad
Keyword(s):  
Phase Change ◽  
Energy Saving ◽  
Air Temperature ◽  
Temperature Control ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Heating System ◽  
Air Heating ◽  
Room Model ◽  
Model Temperature

One essential utilization of phase change materials as energy storage materials is energy saving and temperature control in air conditioning and indirect solar air drying systems. This study presents an experimental investigation evaluating the characteristics and energy savings of multiple phase change materials subjected to internal flow in an air heating system during charging and discharging cycles. The experimental tests were conducted using a test rig consisting of two main parts, an air supply duct and a room model equipped with phase change materials (PCMs) placed in rectangular aluminum panels. Analysis of the results was based on three test cases: PCM1 (Paraffin wax) placed in the air duct was used alone in the first case; PCM2 (RT–42) placed in the room model was used alone in the second case; and in the third case, the two PCMs (PCM1 and PCM2) were used at the same time. The results revealed a significant improvement in the energy savings and room model temperature control for the air heating system incorporated with multiple PCMs compared with that of a single PCM. Complete melting during the charging cycle occurred at temperatures in the range of 57–60 °C for PCM1 and 38–43 °C for PCM2, respectively, thereby validating the reported PCMs’ melting–solidification results. Multiple PCMs maintained the room air temperature at the desired range of 35–45.2 °C in the air heating applications by minimizing the air temperature fluctuations. The augmentation in discharging time and improvement in the room model temperature using multiple PCMs were about 28.4% higher than those without the use of PCMs. The total energy saving using two PCMs was higher by about 29.5% and 46.7% compared with the use of PCM1 and PCM2, respectively. It can be concluded that multiple PCMs have revealed higher energy savings and thermal stability for the air heating system considered in the current study.

scholarly journals Invariant Image Representation Using Novel Fractional-Order Polar Harmonic Fourier Moments

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1544
Author(s):  
Chunpeng Wang ◽  
Hongling Gao ◽  
Meihong Yang ◽  
Jian Li ◽  
Bin Ma ◽  
...  
Keyword(s):  
Image Reconstruction ◽  
Fractional Order ◽  
Continuous Functions ◽  
Kernel Functions ◽  
Superior Performance ◽  
Image Description ◽  
Orthogonal Moments ◽  
Integer Order ◽  
Geometric Invariance ◽  
Order Continuous

Continuous orthogonal moments, for which continuous functions are used as kernel functions, are invariant to rotation and scaling, and they have been greatly developed over the recent years. Among continuous orthogonal moments, polar harmonic Fourier moments (PHFMs) have superior performance and strong image description ability. In order to improve the performance of PHFMs in noise resistance and image reconstruction, PHFMs, which can only take integer numbers, are extended to fractional-order polar harmonic Fourier moments (FrPHFMs) in this paper. Firstly, the radial polynomials of integer-order PHFMs are modified to obtain fractional-order radial polynomials, and FrPHFMs are constructed based on the fractional-order radial polynomials; subsequently, the strong reconstruction ability, orthogonality, and geometric invariance of the proposed FrPHFMs are proven; and, finally, the performance of the proposed FrPHFMs is compared with that of integer-order PHFMs, fractional-order radial harmonic Fourier moments (FrRHFMs), fractional-order polar harmonic transforms (FrPHTs), and fractional-order Zernike moments (FrZMs). The experimental results show that the FrPHFMs constructed in this paper are superior to integer-order PHFMs and other fractional-order continuous orthogonal moments in terms of performance in image reconstruction and object recognition, as well as that the proposed FrPHFMs have strong image description ability and good stability.

Analysis of a New Class of Impulsive Implicit Sequential Fractional Differential Equations

2020 ◽  
Vol 21 (6) ◽  
pp. 571-587 ◽  
Author(s):  
Akbar Zada ◽  
Sartaj Ali ◽  
Tongxing Li
Keyword(s):  
Differential Equations ◽  
Fractional Order ◽  
Fractional Differential Equations ◽  
Sufficient Conditions ◽  
Uniqueness Of Solutions ◽  
Integer Order ◽  
New Class ◽  
Proposed Model ◽  
Fractional Differential ◽  
Sequential Fractional Differential Equations

AbstractIn this paper, we study an implicit sequential fractional order differential equation with non-instantaneous impulses and multi-point boundary conditions. The article comprehensively elaborate four different types of Ulam’s stability in the lights of generalized Diaz Margolis’s fixed point theorem. Moreover, some sufficient conditions are constructed to observe the existence and uniqueness of solutions for the proposed model. The proposed model contains both the integer order and fractional order derivatives. Thus, the exponential function appearers in the solution of the proposed model which will lead researchers to study fractional differential equations with well known methods of integer order differential equations. In the last, few examples are provided to show the applicability of our main results.

Experimental Study of Notoginseng Drying Based on a Solar Air Heating System

2011 ◽  
Vol 71-78 ◽  
pp. 2073-2076
Author(s):  
Fen E Hu ◽  
Zhi Juan Wang
Keyword(s):  
Winter Season ◽  
Heating System ◽  
Solar Drying ◽  
Mass Rate ◽  
Drying Time ◽  
Air Heating ◽  
Solar Air Collector ◽  
Air Blower ◽  
Drying System ◽  
Air Channels

A solar air drying system including solar air collector, drying cabinet and air blower for notoginseng drying has been constructed and tested. Two identical air solar collectors with two air channels, V-groove absorption heat plates and a single glass cover have been employed. The results of test show that the solar air collectors can obtain a good thermal performance in winter season. When the air flow mass rate is fixed at 0.0597kg·s-1, the maximum values of thermal efficiency and outlet air temperature are 76.0% and 62.2°C, respectively. The experimental analysis between two sampling notoginseng drying suggests that the solar drying is very effective, and the drying time has been shorten to about 440 minutes from 990 minutes of the traditional drying by sun. It is also observed that using the solar drying system notoginseng has a higher quality than traditional drying method.

Sign in / Sign up

Export Citation Format

Share Document