Assessment of the impact of the micro wind turbine on the power quality in the distribution network

2019 ◽  
Vol 1 (1) ◽  
pp. 35-38
Author(s):  
Marek GAŁA
2021 ◽  
Author(s):  
◽  
Ramesh Kumar Behara

The growing needs for electric power around the world has resulted in fossil fuel reserves to be consumed at a much faster rate. The use of these fossil fuels such as coal, petroleum and natural gas have led to huge consequences on the environment, prompting the need for sustainable energy that meets the ever increasing demands for electrical power. To achieve this, there has been a huge attempt into the utilisation of renewable energy sources for power generation. In this context, wind energy has been identified as a promising, and environmentally friendly renewable energy option. Wind turbine technologies have undergone tremendous improvements in recent years for the generation of electrical power. Wind turbines based on doubly fed induction generators have attracted particular attention because of their advantages such as variable speed, constant frequency operation, reduced flicker, and independent control capabilities for maximum power point tracking, active and reactive powers. For modern power systems, wind farms are now preferably connected directly to the distribution systems because of cost benefits associated with installing wind power in the lower voltage networks. The integration of wind power into the distribution network creates potential technical challenges that need to be investigated and have mitigation measures outlined. Detailed in this study are both numerical and experimental models to investigate these potential challenges. The focus of this research is the analytical and experimental investigations in the integration of electrical power from wind energy into the distribution grid. Firstly, the study undertaken in this project was to carry out an analytical investigation into the integration of wind energy in the distribution network. Firstly, the numerical simulation was implemented in the MATLAB/Simulink software. Secondly, the experimental work, was conducted at the High Voltage Direct Centre at the University of KwaZulu-Natal. The goal of this project was to simulate and conduct experiments to evaluate the level of penetration of wind energy, predict the impact on the network, and propose how these impacts can be mitigated. From the models analysis, the effects of these challenges intensify with the increased integration of wind energy into the distribution network. The control strategies concept of the doubly fed induction generator connected wind turbine was addressed to ascertain the required control over the level of wind power penetration in the distribution network. Based on the investigation outcomes we establish that the impact on the voltage and power from the wind power integration in the power distribution system has a goal to maintain quality and balance between supply and demand.


2015 ◽  
Vol 734 ◽  
pp. 736-739
Author(s):  
Zhi Qiang Du

This article through to the tianjin area distributed power source development situation investigation, this paper introduces the concept of distributed power supply, this paper expounds the types and characteristics of distributed power supply, analyzes the distributed power supply stability, access to distribution network security protection, power quality, reliability, the influence of the impact puts forward the main technical key.


Author(s):  
Dieta Wahyu Asry Ningtias ◽  
F. Danang Wijaya ◽  
Lesnanto Putra Multanto

Voltage deviations and power losses in the distribution network can be handled in various ways, such as adding diesel power plants and wind turbines. Adaut Village, Tanimbar Islands Regency, Maluku Province has installed a diesel power plant with a capacity of 1,200 kW, while the average hourly electricity load is 374.9 kW. Adaut Village has high wind potential that can be used for distributed generations namely wind turbine (WT). WT can be used to improve power quality in terms of power losses and voltage deviations. In adding WT, the capacity and location must be determined to get good power quality in terms of power loss and voltage deviation. The research applied an optimization technique for determining the capacity and location of WT using non-dominated sorting genetic algorithm II (NSGAII) with an objective function of power losses and voltage deviation. In addition, the economic aspects of the power plant were calculated using the levelized cost of energy (LCOE). The research used scenarios based on the number of WT installed. The best results were obtained in scenario IV or 4 WT with 1.38 kW on Bus 2, 422.43 kW on Bus 15, 834.33 kW on Bus 30, and 380.81 kW on Bus 31 which could reduce power losses by 80% with an LCOE value of Rp7,113.15/kWh. The addition of the WT could also increase the voltage profile to close to 1 pu, which means it can minimize the voltage deviation in the distribution network.


2016 ◽  
Vol 839 ◽  
pp. 124-129
Author(s):  
Myat Mon Yee ◽  
Chatchai Sirisamphanwong

Electricity generation from solar energy by using PV cells is drastically increased due to global warming concern, greenhouse effect, and quality of living standards. However, PV generation may offer variable and unpredictable energy output due to intermittent nature of solar irradiance and hence, integration of PV into grid may provide some drawback effect to the power system. The aim of this paper is to investigate the impact of grid connected PV system on the power quality of distribution network. The power quality analysis is based on real measurements of 10 kWp, Energy Park SERT, School of Renewable Energy, Naresuan University, Thailand. Parameters such as active and reactive power, voltage, current, power factor, THDv, THDi, individual harmonic voltage and harmonic current are observed for the investigation of the interaction between SERT PV system and distribution network’s power quality. According to the measured data, PV system operation is negligible in terms of voltage distortion, voltage magnitude and frequency variation. Therefore, it can be noticed that 10 kWp SERT PV system does not effect on the distribution system power quality due to low PV penetration level.


2009 ◽  
Author(s):  
Ding-Mei Cao ◽  
D. Pudjianto ◽  
G. Strbac ◽  
R. Ferris ◽  
I. Foster ◽  
...  

2021 ◽  
Vol 13 (13) ◽  
pp. 7279
Author(s):  
Zbigniew Skibko ◽  
Magdalena Tymińska ◽  
Wacław Romaniuk ◽  
Andrzej Borusiewicz

Wind power plants are an increasingly common source of electricity located in rural areas. As a result of the high variability of wind power, and thus the generated power, these sources should be classified as unstable sources. In this paper, the authors attempted to determine the impact of wind turbine operation on the parameters of electricity supplied to farms located near the source. As a result of the conducted field tests, variability courses of the basic parameters describing the supply voltage were obtained. The influence of power plant variability on the values of voltage, frequency, and voltage distortion factor was determined. To estimate the capacity of the transmission lines, the reactive power produced in the power plant and its effect on the value of the power factor were determined. The conducted research and analysis showed that the wind power plant significantly influences voltage fluctuations in its immediate vicinity (the maximum value registered was close to 2%, while the value required by law was 2.5%). Although all the recorded values are within limits specified by the current regulations (e.g., the THD value is four times lower than the required value), wind turbines may cause incorrect operation of loads connected nearby. This applies mainly to cases where consumers sensitive to voltage fluctuations are installed in the direct vicinity of the power plant.


Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 55
Author(s):  
Busra Uzum ◽  
Ahmet Onen ◽  
Hany M. Hasanien ◽  
S. M. Muyeen

In order to meet the electricity needs of domestic or commercial buildings, solar energy is more attractive than other renewable energy sources in terms of its simplicity of installation, less dependence on the field and its economy. It is possible to extract solar energy from photovoltaic (PV) including rooftop, ground-mounted, and building integrated PV systems. Interest in rooftop PV system applications has increased in recent years due to simple installation and not occupying an external area. However, the negative effects of increased PV penetration on the distribution system are troublesome. The power loss, reverse power flow (RPF), voltage fluctuations, voltage unbalance, are causing voltage quality problems in the power network. On the other hand, variations in system frequency, power factor, and harmonics are affecting the power quality. The excessive PV penetration also the root cause of voltage stability and has an adverse effect on protection system. The aim of this article is to extensively examines the impacts of rooftop PV on distribution network and evaluate possible solution methods in terms of the voltage quality, power quality, system protection and system stability. Moreover, it is to present a comparison of the advantages/disadvantages of the solution methods discussed, and an examination of the solution methods in which artificial intelligence, deep learning and machine learning based optimization and techniques are discussed with common methods.


Sign in / Sign up

Export Citation Format

Share Document