Detailed analysis of common mode and differential mode conducted emission generation in switch mode power supplies

2016 ◽  
Vol 1 (8) ◽  
pp. 230-235
Author(s):  
Witold AKSAMIT
Author(s):  
Yan Zhou ◽  
JingJing Zhao ◽  
Ni Mo ◽  
Zhe Sun ◽  
SuYuan Yu

With the application in HTR-10GT, the reliability and stability of the AMB system should be studied deeply. Especially EMI analysis on the switch power amplifier is needed to be done, since which one is the main interference source for AMB during the switch turn-on and turn-off. Based on it, a simplified and improved modeling method is listed by dividing the nonlinear transition into several stages, and the models of the voltage source and current source are built in the form of the piece-wise linear way. The conducted emission on the differential mode noise and the common mode is shown by simulation. The result could provide the theoretical basis on the designing the grounding, filter and isolation for the AMB system.


Frequenz ◽  
2020 ◽  
Vol 74 (7-8) ◽  
pp. 263-270
Author(s):  
Cao Zeng ◽  
Xue Han Hu ◽  
Feng Wei ◽  
Xiao Wei Shi

AbstractIn this paper, a tunable balanced-to-balanced in-phase filtering power divider (FPD) is designed, which can realize a two-way equal power division with high selectivity and isolation. A differential-mode (DM) passband with a steep filtering performance is realized by applying microstrip stub-loaded resonators (SLRs). Meanwhile, six varactors are loaded to the SLRs to achieve the center frequency (CF) and bandwidth adjustment, respectively. U-type microstrip lines integrated with stepped impedance slotline resonators are utilized as the differential feedlines, which suppress the common-mode (CM) intrinsically, making the DM responses independent of the CM ones. A tuning center frequency from 3.2 to 3.75 GHz and a fractional bandwidth (12.1–17.6%) with more than 10 dB return loss and less than 2.3 dB insertion loss can be achieved by changing the voltage across the varactors. A good agreement between the simulated and measured results is observed. To the best of authors' knowledge, the proposed balanced-to-balanced tunable FPD is first ever reported.


2016 ◽  
Vol 9 (5) ◽  
pp. 1029-1035 ◽  
Author(s):  
Jugul Kishor ◽  
Binod K. Kanaujia ◽  
Santanu Dwari ◽  
Ashwani Kumar

Synthesis of differential-mode bandpass filter (BPF) with good common-mode suppression has been described and demonstrated on the basis of ring dielectric resonator (RDR) for high-performance communication system. A RDR with two pairs of feeding lines has been used to excite TE01δ-mode. This unique combination of feeding lines and the ring resonator creates a differential passband. Meanwhile, TM01δ-mode of the DR can also be excited to achieve common-mode rejection in the stopband. Transmission zeros are created in the lower and upper stopband to further improve the selectivity of the proposed BPF. A second-order differential BPF is designed, fabricated and its performance is measured to validate the concept. There is good agreement between simulated and measured results.


Sign in / Sign up

Export Citation Format

Share Document