The influence of thermomechanical processing conditions on magnetic properties of electrical steels

2015 ◽  
Vol 1 (8) ◽  
pp. 43-47
Author(s):  
Peter BELLA
Keyword(s):  
Magnetic Properties ◽  
Thermomechanical Processing ◽  
Processing Conditions ◽  
Electrical Steels

ARMCO DI-MAX NONORIENTED ELECTRICAL STEELS

Alloy Digest ◽  
1999 ◽  
Vol 48 (1) ◽  
Keyword(s):  
Magnetic Properties ◽  
Physical Properties ◽  
Tensile Properties ◽  
Core Loss ◽  
Electrical Steels

Abstract Armco DI-MAX nonoriented electrical steels have practically identical magnetic properties in any direction of magnetism in the plane of the material. They have superior permeability at high inductions, low average core loss, good gage uniformity, excellent flatness, and a high stacking factor. This datasheet provides information on composition, physical properties, hardness, and tensile properties. Filing Code: FE-88. Producer or source: Armco Inc., Specialty Steels Division. Originally published April 1989, revised January 1999.

scholarly journals Effect of Industrial Impregnation Process on the Magnetic Properties of Electrical Steels

2021 ◽  
pp. 167942
Author(s):  
H. Helbling ◽  
A. Benabou ◽  
A. Van Gorp ◽  
A. Tounzi ◽  
M. El Youssef ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Electrical Steels ◽  
Impregnation Process

Comparison between Magnetic Anisotropy Energy and a Parameter to the Assessment of Magnetic Property of Electrical Steel

2018 ◽  
Vol 930 ◽  
pp. 449-453
Author(s):  
R.A.C. Felix ◽  
R.L.O. da Rosa ◽  
Luiz P. Brandão
Keyword(s):  
Magnetic Properties ◽  
Magnetic Property ◽  
Magnetic Anisotropy ◽  
Electrical Steel ◽  
Anisotropy Energy ◽  
Alternative Methods ◽  
Magnetic Polarization ◽  
Magnetic Anisotropy Energy ◽  
Electrical Steels ◽  
Global Parameters

Alternative methods of quantitative texture analysis are applied to characterize the non-oriented grain electrical steels (NOG) in relation to their magnetic properties. Magnetic anisotropy energy (Ea) and A parameter are two models based on crystallographic texture that generates global parameters that can be used to predict the magnetic properties of NOG steels. In this work, these two models were used to evaluate the magnetic polarization and compared between themselves to realize which one best correlates to this property.

Effect of metallurgical factors on the bulk magnetic properties of non-oriented electrical steels

2014 ◽  
Vol 356 ◽  
pp. 42-51 ◽  
Author(s):  
Pampa Ghosh ◽  
Richard R. Chromik ◽  
Andrew M. Knight ◽  
Shekhar G. Wakade
Keyword(s):  
Magnetic Properties ◽  
Electrical Steels

Effects of Lanthanum and Boron on the Microstructure and Magnetic Properties of Non-oriented Electrical Steels

2014 ◽  
Vol 33 (2) ◽  
pp. 115-121 ◽  
Author(s):  
Yong Wan ◽  
Wei-qing Chen ◽  
Shao-jie Wu
Keyword(s):  
Magnetic Properties ◽  
Core Loss ◽  
Inclusion Size ◽  
Fiber Texture ◽  
The Other ◽  
Magnetic Flux Density ◽  
Boron Steel ◽  
Final Annealing ◽  
Electrical Steels ◽  
Microstructure And Magnetic Properties

AbstractThe effects of lanthanum and boron on the inclusion size distribution, microstructure, texture and magnetic properties of three non-oriented electrical steels have been studied. After final annealing, lanthanum effectively inhibited the precipitation of MnS precipitates and promoted the growth of grains, an addition of 0.0041 wt.% boron led to the precipitation of Fe2B particles and inhibited grain growth. On the other hand, steel containing 0.0055 wt.% lanthanum had the strongest {100} and {111} fiber texture and the weakest {112}〈110〉 texture among the steels. Compared to steel without lanthanum and boron, steel with 0.0050 wt.% lanthanum and 0.0041 wt.% boron obtained slightly stronger intensities of {100} and {111} fiber texture, and a little weaker intensity of {112}〈110〉 texture. Steel containing 0.0055 wt.% lanthanum achieved the best magnetic properties, whose core loss and magnetic flux density were 4.268 W/kg and 1.768 T, respectively.

scholarly journals Improving the Magnetic Properties of Non-Oriented Electrical Steels by Secondary Recrystallization Using Dynamic Heating Conditions

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1914 ◽  
Author(s):  
Ivan Petryshynets ◽  
František Kováč ◽  
Branislav Petrov ◽  
Ladislav Falat ◽  
Viktor Puchý
Keyword(s):  
Heat Treatment ◽  
Magnetic Properties ◽  
Boundary Migration ◽  
Cold Work ◽  
Secondary Recrystallization ◽  
Coarse Grained ◽  
High Heating Rate ◽  
Electrical Steels ◽  
Heat Treated ◽  
Dynamic Heating

In the present work, we have used unconventional short-term secondary recrystallization heat treatment employing extraordinary high heating rate to develop coarse-grained microstructure with enhanced intensity of rotating cube texture {100}<011> in semi-finish vacuum degassed non-oriented electrical steels. The soft magnetic properties were improved through the increase of grains size with favourable cube crystallographic orientation. The appropriate final textural state of the treated experimental steels was achieved by strain-induced grain boundary migration mechanism, activated by gradient of accumulated stored deformation energy between neighbouring grains after the application of soft cold work, combined with steep temperature gradient during subsequent heat treatment under dynamic heating conditions. The materials in our experimentally prepared material states were mounted on the stator and rotor segments of electrical motors and examined for their efficiency in real operational conditions. Moreover, conventionally long-term heat treated materials, prepared in industrial conditions, were also tested for reference. The results show that the electrical motor containing the segments treated by our innovative approach, exhibits more than 1.2% higher efficiency, compared to the motor containing conventionally heat treated materials. The obtained efficiency enhancement can be directly related to the improved microstructural and textural characteristics of our unconventionally heat treated materials, specifically the homogenous coarse grained microstructure and the high intensity of cube and Goss crystallographic texture.

Sign in / Sign up

Export Citation Format

Share Document