scholarly journals Adsorción del naranja de metilo en solución acuosa sobre hidróxidos dobles laminares

2015 ◽  
Vol 25 (3) ◽  
pp. 25-34 ◽  
Author(s):  
Laura Alicia Ramírez Llamas ◽  
Araceli Jacobo Azuara ◽  
J. Merced Martínez Rosales
Keyword(s):  
Methyl Orange ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Temperature Programmed Desorption ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Suitable Temperature ◽  
Temperature Programmed ◽  
Double Hydroxides

In this paper, layered double hydroxides (LDH) were synthesized and characterized using techniques of Physisorption of Nitrogen, Infrared, Temperature Programmed Desorption, X-Ray Diffraction, TGA and Immersion Microcalorimetry, in order to determine the basic properties of the adsorbent. The methyl orange (MO) is used as a dye and as a result, it is frequently found in effluents from textile industries. The dye adsorption isotherms on LDH were studied as function of pH and temperature. The maximum adsorption capacity of methyl orange on LDH was carried out at pH 5, and the minimum adsorption capacity at pH 11, being 40.2 mg/g and 22.1 mg/g, respectively. Furthermore, the suitable temperature to promote the adsorption of methyl orange on LDH was at 25 °C, as at 35 °C shows a significant decrease. 

scholarly journals Fe(III) Complexed Polydopamine Modified Mg/Al Layered Double Hydroxide Enhances The Removal of Cr(VI) From Aqueous Solutions

2021 ◽  
Author(s):  
Changcheng Chen ◽  
Mina Luo ◽  
Fu Chen ◽  
Chao Huang ◽  
Chunmei Zhu ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Removal Capacity ◽  
Double Hydroxide ◽  
Double Hydroxides ◽  
Influence Of Ph

Abstract Herein, we report the preparation of Fe(III) complexed polydopamine modified Mg/Al layered double hydroxides composite material (LDHs@PDA-Fe(III)) and its application to the removal of Cr(VI) in aqueous solution. LDHs@PDA-Fe(III) was characterized and analyzed by field-emission scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transformed infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron (XPS). The adsorption performance was studied through a series of adsorption experiments. Under the influence of pH, time, temperature, concentration, the maximum adsorption capacity obtained in the experiment is 683.4 mg/g. In addition, after 5 adsorption cycles, LDHs@PDA-Fe(III) still shows excellent adsorption capacity and stability. Combining adsorption experiments and characterization analysis, it is inferred that the adsorption of Cr(VI) by LDHs@PDA-Fe(III) is the result of the synergistic effect of multiple adsorption mechanisms. Therefore, the efficient removal capacity and excellent stability make LDHs@PDA-Fe(III) an ideal adsorbent for removing Cr(VI) from aqueous solutions.

scholarly journals β-Cyclodextrin Modified Poly(Acrylonitrule-co-Acrylic Acid) Hydrogel for Thorium(IV) Adsorption

Polymers ◽  
2017 ◽  
Vol 9 (6) ◽  
pp. 201 ◽  
Author(s):  
Guojian Duan ◽  
Qiangqiang Zhong ◽  
Lei Bi ◽  
Liu Yang ◽  
Tonghuan Liu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Water System ◽  
Maximum Adsorption Capacity ◽  
Practical Application ◽  
X Ray Diffraction ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

In this report, the β-CD(AN-co-AA) hydrogel was used to remove the thorium(IV) [Th(IV)] from the water system, and the new adsorbent was characterized through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The influences of contact time, pH value, ionic strength, solid-liquid ratio, initial Th(IV) concentration, and temperature on Th(IV) adsorption onto the functional hydrogel were researched. The results showed that the experimental data followed the Langmuir isotherm and the maximum adsorption capacity (qmax) for Th(IV) was 692 mg/g at pH 2.95, which approached the calculated (qe) 682 mg/g. The desorption capacity of Th(IV) in different HNO3 concentrations ranging from 0.005 to 0.5 M was also studied, and the percentage of the maximum desorption was 86.85% in the condition of 0.09 M HNO3. The selectivity of β-CD(AN-co-AA) hydrogel was also be studied, the results indicated that this material retained the good adsorption capacity to Th(IV) even when the Ca2+, Mg2+, or Pb2+ existed in the system. The findings indicate that β-CD(AN-co-AA) can be used as a new candidate for the enrichment and separation of Th(IV), or its analogue actinides, from large-volume solution in practical application.

scholarly journals In-Exchanged CHA Zeolites for Selective Dehydrogenation of Ethane: Characterization and Effect of Zeolite Framework Type

Catalysts ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 807
Author(s):  
Zen Maeno ◽  
Xiaopeng Wu ◽  
Shunsaku Yasumura ◽  
Takashi Toyao ◽  
Yasuharu Kanda ◽  
...  
Keyword(s):  
Active Sites ◽  
Temperature Programmed Desorption ◽  
X Ray Diffraction ◽  
Zeolite Framework ◽  
X Ray ◽  
Catalytic Activities ◽  
Ethane Dehydrogenation ◽  
Temperature Programmed

In this study, the characterization of In-exchanged CHA zeolite (In-CHA (SiO2/Al2O3 = 22.3)) was conducted by in-situ X-ray diffraction (XRD) and ammonia temperature-programmed desorption (NH3-TPD). We also prepared other In-exchanged zeolites with different zeolite structures (In-MFI (SiO2/Al2O3 = 22.3), In-MOR (SiO2/Al2O3 = 20), and In-BEA (SiO2/Al2O3 = 25)) and different SiO2/Al2O3 ratios (In-CHA(Al-rich) (SiO2/Al2O3 = 13.7)). Their catalytic activities in nonoxidative ethane dehydrogenation were compared. Among the tested catalysts, In-CHA(Al-rich) provided the highest conversion. From kinetic experiments and in-situ Fourier transform infrared (FTIR) spectroscopy, [InH2]+ ions are formed regardless of SiO2/Al2O3 ratio, serving as the active sites.

scholarly journals Experimental Investigations of the Interaction of SO2 with MgO

1999 ◽  
Vol 590 ◽  
Author(s):  
Andrea Freitag ◽  
J. A. Rodriguez ◽  
J. Z. Larese
Keyword(s):  
High Resolution ◽  
Film Thickness ◽  
Room Temperature ◽  
Temperature Programmed Desorption ◽  
Experimental Investigations ◽  
X Ray Diffraction ◽  
High Quality ◽  
X Ray ◽  
Temperature Programmed ◽  
X Ray Absorption

ABSTRACTHigh resolution adsorption isotherms, temperature programmed desorption (TPD), x-ray diffraction (XRD) and x-ray absorption near edge spectroscopy (XANES) methods were used to investigate the interaction of SO2 with high quality MgO powders. The results of these investigations indicate that when SO2 is deposited on MgO in monolayer quantities at temperatures near 100K both SO3 and SO4 species form that are not removed by simply pumping on the pre-dosed samples at room temperature. TPD and XANES studies indicate that heating of pre-dosed MgO samples to temperatures above 350 °C is required for full removal of the SO3/SO4 species. XANES measurements made as a function of film thickness indicate for coverages near monolayer completion that the SO4 species form first.

scholarly journals Preparation of GO/MIL-101(Fe,Cu) composite and its adsorption mechanisms for phosphate in aqueous solution

2021 ◽  
Author(s):  
You Wu ◽  
Zuannian Liu ◽  
Bakhtari Mohammad Fahim ◽  
Junnan Luo
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Mechanism ◽  
Nitrogen Adsorption ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Adsorption Desorption

Abstract In this study, MIL-101(Fe), MIL-101(Fe,Cu), and Graphene Oxide (GO) /MIL-101(Fe,Cu) were synthesized to compose a novel sorbent. The adsorption properties of these three MOFs-based composites were compared toward the removal of phosphate. Furthermore, the influencing factors including reaction time, pH, temperature and initial concentration on the adsorption capacity of phosphate on these materials as well as the reusability of the material were discussed. The structure of fabricated materials and the removal mechanism of phosphate on the composite material were analyzed by Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analysis and zeta potential. The results show that the maximum adsorption capacity of phosphate by the composite GO/MIL-101(Fe,Cu)-2% was 204.60 mg·g− 1, which is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe). likewise the specific surface area of GO/MIL-101(Fe,Cu)-2% is 778.11 m2/g is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe),which are 747.75 and 510.66m2/g respectively. The adsorption mechanism of phosphate is electrostatic attraction, form coordination bonds and hydrogen bonds. The fabricated material is a promising adsorbent for the removal of phosphate with good reusability.

scholarly journals Promotion Effect of CaO Modification on Mesoporous Al2O3-Supported Ni Catalysts for CO2Methanation

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Wen Yang ◽  
Yanyan Feng ◽  
Wei Chu
Keyword(s):  
Surface Coverage ◽  
Temperature Programmed Desorption ◽  
Impregnation Method ◽  
Nio Nanoparticles ◽  
X Ray Diffraction ◽  
Ni Catalysts ◽  
X Ray ◽  
Temperature Programmed ◽  
Adsorption Desorption ◽  
Supported Ni

The catalysts Ni/Al2O3and CaO modified Ni/Al2O3were prepared by impregnation method and applied for methanation of CO2. The catalysts were characterized by N2adsorption/desorption, temperature-programmed reduction of H2(H2-TPR), X-ray diffraction (XRD), and temperature-programmed desorption of CO2and H2(CO2-TPD and H2-TPD) techniques, respectively. TPR and XRD results indicated that CaO can effectively restrain the growth of NiO nanoparticles, improve the dispersion of NiO, and weaken the interaction between NiO and Al2O3. CO2-TPD and H2-TPD results suggested that CaO can change the environment surrounding of CO2and H2adsorption and thus the reactants on the Ni atoms can be activated more easily. The modified Ni/Al2O3showed better catalytic activity than pure Ni/Al2O3. Ni/CaO-Al2O3showed high CO2conversion especially at low temperatures compared to Ni/Al2O3, and the selectivity to CH4was very close to 1. The high CO2conversion over Ni/CaO-Al2O3was mainly caused by the surface coverage by CO2-derived species on CaO-Al2O3surface.

The Effect of Thermal Treatment on the Structure of Palygorskite Used for Flue Gas SO2 Removal

2011 ◽  
Vol 356-360 ◽  
pp. 698-703 ◽  
Author(s):  
Xian Long Zhang ◽  
Wei Ping Jiang ◽  
Xue Ping Wu ◽  
Bo Wen Shi ◽  
Bao Jun Yang ◽  
...  
Keyword(s):  
Thermal Treatment ◽  
Structural Properties ◽  
Flue Gas ◽  
Temperature Programmed Desorption ◽  
Flue Gas Desulfurization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Sites ◽  
Transmission Electron ◽  
Temperature Programmed

Palygorskite is widely used as industrial adsorbent and also potential for flue gas desulfurization by adsorption of SO2. The effect of thermal treatment on Palygorskite’s structural properties and its performance in SO2adsorption were investigated. The textural and structural properties of the prepared palygorskite adsorbent were characterized by X-ray diffraction, transmission electron microscopy and temperature programmed desorption. The result showed the channel of Palygorskite is partial collapsed and the structure is not changed ultimately when thermally treated below 300 °C. The structure of Palygorskite is Gradually changed when the treating temperature is higher than 300 °C and is damaged entirety till 800 °C. As a result, the adsorption capacity of SO2on Palygorskite decreased drastically. It is suggested that the presences of surface adorbed water and zeolitic water which occupy a large number of adsorption sites are disadvantage for the adsorption of SO2, and dissimilarly the presence of crystal-bonded water is favorable.

Effect of the Addition of In to Co/HMCM-49 Catalyst for the Selective Catalytic Reduction of NO Under Lean-burn Conditions

2010 ◽  
Vol 224 (06) ◽  
pp. 907-920 ◽  
Author(s):  
Fei Li ◽  
Dehai Xiao ◽  
Jing Li ◽  
Xiangguang Yang
Keyword(s):  
Selective Catalytic Reduction ◽  
Wide Temperature Range ◽  
Catalytic Reduction ◽  
Temperature Programmed Desorption ◽  
X Ray Diffraction ◽  
Lean Burn ◽  
Reduction Of No ◽  
X Ray ◽  
Scr Of No ◽  
Temperature Programmed

AbstractSelective catalytic reduction (SCR) of NO with propane using bimetals (3Co2Ce, 3Co2Sr, 3Co2Sn and 3Co2In) loaded on HMCM-49 zeolite was studied under lean-burn condition. Only 3Co2In/HMCM-49 exhibited higher deNOx activity in a wide temperature range. The catalysts were characterized by N2-adsoption, X-ray diffraction (XRD), temperature-programmed surface reactions (TPSR) and temperature-programmed desorption (TPD) of NO. TPSR and TPD results exhibited that the addition of In inhibited the oxidation ability of Co on 3Co2In/HMCM-49 catalyst, but enhanced NOx adsorption.

Sign in / Sign up

Export Citation Format

Share Document