Fast Dissolving Sublingual Strips: A Novel Approach for the Delivery of Isosorbide Dinitrate

2019 ◽  
Vol 25 (4) ◽  
pp. 311-318
Author(s):  
Marzieh Fathei ◽  
Mitra Alami-milani ◽  
Sara Salatin ◽  
Sharahm Sattari ◽  
Hassan Montazam ◽  
...  
Keyword(s):  
Drug Release ◽  
Isosorbide Dinitrate ◽  
Moisture Absorption ◽  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Drug Bioavailability ◽  
Scanning Calorimetry ◽  
Surface Ph ◽  
Drug Content

Background: Isosorbide dinitrate (ISDN) is used for treating the angina attacks. In addition, oral ISDN is available in immediate and sustained release formulations and the bioavailability of ISDN is about 20-25% when taken orally. Further, the ISDN films are developed for sublingual drug delivery by improving drug bioavailability. The present study aimed to design and evaluate the physicochemical properties of the film formulation for sublingual delivery of ISDN. Methods: In the present study, sublingual films were prepared by the solvent casting technique using the hydroxypropyl methylcellulose (HPMC) polymers (i.e., 100, 150 and 200 mg) with a different drug to polymer ratios (i.e., 1:5, 1:7.5 and 1:10). Then, ISDN was evaluated for the film appearance, drug content, surface pH, mucoadhesion force, differential scanning calorimetry (DSC), in vitro drug release, and ex vivo permeability. Results: Based on the results, F3 formulation (1:10 ISDN to HPMC ratio) showed acceptable thickness (0.93 mm), weight (11.14 mg), surface pH (7.82), moisture absorption capacity (6.08%), elasticity (>200), mucoadhesion force (18.05 N/cm2), and drug content (6.22%). Furthermore, the results demonstrated that HPMC polymer improved the characteristics of the films, modified the bioadhesiveness, and finally, enhanced elasticity. However, DSC thermogram failed to show any crystalline drug substance in the films except for F1 (immediate release) and the endothermic peak of ISDN was absent in F2 and F3 films. Therefore, the drug which was entrapped into the film was in an amorphous or disturbed-crystalline phase of the molecular dispersion or dissolved in the melted polymer in the polymeric matrix. Moreover, the drug release from the films was faster compared to the tablet® (P<0.05). Conclusion: In general, the formulation of F1 was observed to be an appropriate candidate for developing the sublingual film for the remedial use.

scholarly journals Characterization of bilayered matrix-type mucoadhesive buccal films containing tizanidine hydrochloride and piroxicam

2021 ◽  
Vol 20 (11) ◽  
pp. 2241-2248
Author(s):  
M. Yasmin Begum ◽  
Ali Alqahtani
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Residence Time ◽  
Ex Vivo ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Folding Endurance ◽  
Buccal Films

Purpose: To formulate and characterize tizanidine hydrochloride (TZN) and piroxicam (PRX)-loaded bilayer mucoadhesive buccal films with an intention to improve the bioavailability and patient compliance in pain management.Methods: Bilayer buccal films were prepared by solvent evaporation technique using hydroxypropyl methylcellulose (HPMC) 15cps and polyvinylpyrrolidone (PVP K30 as immediate release (IR) layer forming polymers and HPMC K15 M, PVP K 90 along with various muco adhesive polymers (Carbopol P934, sodium alginate, etc), as sustained release (SR) layer forming polymers. The prepared films werecharacterized for thickness, weight variation, folding endurance, surface pH, swelling index,mucoadhesive strength, in vitro residence time, in vitro drug release, ex vivo permeation and drug release kinetics.Results: The prepared films were of largely uniform thickness, weight and drug content. Moisture loss (%) and folding endurance were satisfactory. Surface pH was compatible with salivary fluid. Disintegration time was 85 s for F1 and 115 s for F2 of IR films. In vitro dissolution studies showed 99.12 ± 1.2 % (F1) and 90.36 ± 1.8 % (F2) were released in 45 min. Based on the above results, F1 was chosen as the optimum formulation to be combined with SR layer of TZN. Amongst the SR layers of TZN in vitro drug release. The findings show that of F2 was 98.38 ± 0.82 % and correlated with ex vivo release. Drug release followed zero order release kinetics and mechanism of drug release was non-Fickian type diffusion. In vitro residence time was greater than 5 h.Conclusion: The findings show that the bilayer buccal films demonstrate the dual impact of deliveringPRX instantly from the IR layer, with good controlled release and permeation of TZN from the SR layer, thus providing enhanced therapeutic efficacy, drug bioavailability and patient compliance.

Development of Promethazine Hydrochloride Mucoadhesive Patches for Buccal Delivery: In vitro, Ex vivo and In vivo Characterization

2012 ◽  
Vol 5 (2) ◽  
pp. 1697-1705
Author(s):  
Y. Madhusudan Rao ◽  
Chopparapu K S C ◽  
P. Chinna Reddy ◽  
Narender Doodipala
Keyword(s):  
Drug Release ◽  
Moisture Absorption ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Physicochemical Interaction ◽  
Surface Ph ◽  
Drug Permeation ◽  
Promethazine Hydrochloride

Promethazine hydrochloride (PMZ HCl), an antiemetic, undergoes extensive first-pass metabolism (bioavailability 25%). The purpose of the present investigation was to develop mucoadhesive patches for transbuccal delivery of PMZ HCl using solvent casting technique with Hydroxy ethyl cellulose (Natrosol 250 E) and hydroxylpropyl methyl cellulose as mucoadhesive polymers and propylene glycol as the plasticizer and evaluate their physicochemical characteristics, in vitro drug release, moisture absorption, surface pH, mechanical properties, in vitro bioadhesion, in vivo residence time, and ex vivo drug permeation through porcine buccal membranes from optimized buccal patch and stability studies. The physicochemical interaction between PMZ HCl and polymers was investigated by Fourier Transform Infrared Spectroscopy. Ex vivo drug permeation through porcine buccal membrane was performed and 83.7% of the drug permeated in 6 hours with flux 0.19 mg h–1cm–2. The optimized formulation AA4 showed maximum drug release (98%) in 6 hours in the Higuchi model release profile. Moisture absorption, surface pH, tensile strength, elongation at break, peak detachment force and work of adhesion values of the optimized formulation were found to be 68.1%, pH 6.7, 12.3 kg/mm2, 69.2 % mm2, 7.5 N and 2.73 mJ respectively. Formulation AA4 showed 77.6% of the drug permeated through porcine buccal membrane in 6 hours and flux calculated to be 0.45 mg h–1cm–2. FTIR studies showed no evidence of interaction between the drug and polymers. In vivo mucoadhesive behaviour of the optimized formulation was studied in healthy human volunteers and subjective parameters were evaluated. The stability of the optimized formulation was studied and no significant changes were detected in drug content, in vitro release and ex vivo permeation after 6 months.

scholarly journals TRANSBUCCAL DELIVERY OF SPRAY DRIED LOVASTATIN FROM MUCOADHESIVE BUCCAL PATCHES AND IN VITRO CHARACTERIZATION

2019 ◽  
pp. 181-187
Author(s):  
BHUVANESHWARI R. SHARANNAVAR ◽  
ANAND P. GADAD
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Ex Vivo ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Permeation ◽  
Drug Content ◽  
Folding Endurance ◽  
Spray Dried

Objective: The aim of the present work was to develop and characterize mucoadhesive film of spray dried Lovastatin (LVS) for buccal delivery to enhance bioavailability. Methods: Mucoadhesive films were prepared by solvent casting technique by using different polymers HPMCK4M, HPMC E5LV and chitosan. The successful patches were evaluated for film thickness, weight, content uniformity, surface pH, swelling index, folding endurance, ex-vivo residence time, ex-vivo bioadhesion test, in vitro drug release, ex-vivo drug permeation and stability study. Results: The thickness of all prepared patches ranged from 0.21±0.07 to 1.5±0.39 mm, the weight of the film 89.10±0.6 to 128.57±0.3 mg, drug content 85.47±0.87 to 97.33±0.31%, surface pH 5.6±0.67 to 7.6±0.98, swelling index 23.0±4.1 to 76.5±3.6%, folding endurance 165±1.9 to 350±2.5 respectively. Ex-vivo residence time ranged from 2.2±0.08to 8.2±0.17 h and ex-vivo bioadhesive strength 30±0.64 to 66±0.43 g. The formulations with HPMC E5 shown short period of residence time and shows weak force of adhesion., which might be because of low viscosity of the polymer which resulted into weak adhesion. The percentage drug release and ex-vivo drug permeation was in the following descending order HPMC K4M>HPMC E5LV>chitosan. These results confirm the extension of drug release in case of ionic polymer chitosan. The kinetics data shows that drug release and permeation follows nonfiction diffusion. Accelerated stability data revealed that there is no significant change in drug content, in vitro drug release and ex-vivo permeation. Conclusion: It can be concluded that mucoadhesive buccal patch is a promising dosage form to enhance the drug bioavailability by preventing first-pass metabolism thus providing better therapeutic efficacy.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

scholarly journals FORMULATION AND CHARACTERIZATION OF SUSTAINED RELEASE COATED MATRIX GRANULES OF METFORMIN HYDROCHLORIDE

2018 ◽  
Vol 11 (7) ◽  
pp. 387
Author(s):  
Radha Rani Earle ◽  
Kiran Kumar Bandaru ◽  
Lakshmi Usha A
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Diabetes Mellitus Type Ii ◽  
Drug Content ◽  
Percentage Yield

Objective: Metformin hydrochloride is a biguanide antihyperglycemic agent which is a generally recommended first-line drug for the treatment of diabetes mellitus (Type II). The purpose of this investigation is to prepare sustained release matrix granules of metformin hydrochloride which are coated to extend the drug release over a longer time period.Methods: Metformin hydrochloride granules were prepared by mixing all the dry powders in a V-cone blender and wetting the powder mix with aqueous solution of hydroxypropyl methyl cellulose K100. The prepared granules (MG1-MG5) were investigated for drug release. The batch of granules which exhibited extended release for up to 4 h was coated in a standard coating pan with blends of Eudragit RS and RL to further enhance release period. These were marked as coated metformin granules (CMG3) and CMG4 which were later filled into empty capsules. The granules were characterized for micromeritic properties, percentage yield, particle size distribution, percentage of drug content, and in vitro release of the drug.Results: All the formulations showed percentage yield in the range of 77.66–82.86% and drug content in the range of 78.23–96.62%. CMG3 showed drug release of 97.02% for 12 h. Fourier-transform infrared spectroscopy and differential scanning calorimetry studies indicated that no possible interaction existed between the drug and the polymers used. Scanning electron microscopy images revealed that the granules were spherical in shape with smooth surface and completely covered with a coating of polymer. Kinetic analysis of drug release confirmed that drug release followed zero-order kinetics where it is independent of the concentration.Conclusion: From the results, it was analyzed that design of coated granules employing the polymers used in the present work can produce a sustained release of the drug over a period of 12 h.

scholarly journals PREPARATION, CHARACTERIZATION AND EVALUATION OF FLOATING MICROPARTICLES OF CIPROFLOXACIN

2016 ◽  
Vol 9 (1) ◽  
pp. 1 ◽  
Author(s):  
Sumit Durgapal ◽  
Sayantan Mukhopadhyay ◽  
Laxmi Goswami
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Solvent Evaporation ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Aqueous Solvent ◽  
Evaporation Technique ◽  
Evaluation Parameters

Objective: The main purpose of this study is to prepare a floating micro articulated drug delivery system of ciprofloxacin by using non-aqueous solvent evaporation technique to increase the bioavailability and therapeutic effectiveness of the drug by prolonging its gastric residence time.Methods: Floating microparticles were prepared by using different low-density polymers such as ethyl cellulose and hydroxypropyl methylcellulose either alone or in combination with the aid of non-aqueous solvent evaporation technique. All the formulated microparticles were subjected to various evaluation parameters such as percentage yield, drug content, drug entrapment, rheological studies, floating characteristics and in vitro drug release studies.Results: Drug-excipient compatibility studies performed with the help of FTIR instrument indicated that there were no interactions. Results revealed that non-aqueous solvent evaporation technique is a suitable technique for the preparation of floating microspheres as most of the formulations were discrete and spherical in shape with a good yield of 65% to 85% and 15 to 22 h of floating duration with 90% of maximum percentage floating capacity shown by formulation FM9. Though, different drug-polymer ratios, as well as a combination of polymers, play a significant role in the variation of overall characteristics of formulations. Based on the data of various evaluation parameters such as particle size analysis, drug content, drug entrapment, rheological studies and in vitro drug release characteristics formulation FM9 was found to fulfil the criteria of ideal floating drug delivery system.Conclusion: Floating microparticles were successfully prepared, and from this study, it can be concluded that the developed floating microspheres of ciprofloxacin can be used for prolonged drug release in the stomach to improve the bioavailability and patient compliance.

scholarly journals DEVELOPMENT AND EVALUATION OF TRANSDERMAL FILM CONTAINING SOLID LIPID NANOPARTICLES OF RIVASTIGMINE TARTRATE

2017 ◽  
Vol 9 (6) ◽  
pp. 85
Author(s):  
G. Ravi ◽  
N. Vishal Gupta
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Cost Effective ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Study Results ◽  
Transdermal Film

Objective: The objective of present investigation was to develop rivastigmine tartrate transdermal film employing factorial design.Methods: The formulations were designed by Design-Expert software-version10. A series of films were prepared by solvent casting method using polymers, plasticizer, permeation enhancer and other solvents. Transdermal films were evaluated for flatness, drug content, tensile strength, in vitro drug release and ex vivo skin permeation study.Results: The flatness was found 100% (percentage) for all film formulations. The drug content of transdermal film was found in the range of 96.51±0.2 to 98.81±0.3%. The tensile strength of transdermal film was found in the range of 6.28±0.06 to 11.56±0.03 N/mm2 (newton/millimeter2) and in vitro drug release at 24th h (hour) was found in the range of 86.24±0.25 to 96.1±0.48%% for various formulations and ex vivo skin permeation study results at 24th h was found in the range of 85.83±0.74 to 97.36±0.93%.Conclusion: These results support the feasibility of developing transdermal film of rivastigmine tartrate for human applications. Thus, transdermal delivery of rivastigmine tartrate film is a safe, painless and cost effective drug delivery system for Alzheimer’s patients.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF MUCOADHESIVE MICROSPHERE-LOADED INTRANASAL GEL OF VENLAFAXINE HYDROCHLORIDE

2016 ◽  
Vol 9 (9) ◽  
pp. 139
Author(s):  
Kritika Saikia ◽  
Bhupen Kalita ◽  
Banasmita Kalita
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Sustained Drug Release ◽  
Scanning Calorimetry ◽  
Venlafaxine Hydrochloride ◽  
Gel Formulations ◽  
Carbopol 934P ◽  
Mucoadhesive Microsphere

ABSTRACTObjective: The main objective of the present work is to develop and characterize a novel mucoadhesive intranasal microsphere gel formulation ofdrug venlafaxine to control the drug release through nasal mucosa and reach the target site with minimal side effect. The objectives of the studyare (1) formulation of mucoadhesive microspheres, (2) evaluation of mucoadhesive microspheres, (3) formulation of mucoadhesive microsphereloadednasal gel, (4) and evaluation of nasal gel.Methods: Preparation of chitosan microsphere: The chitosan microspheres were prepared by emulsion cross-linking method. Preparation ofmicrosphere-loaded gel: The nasal gels with varying concentrations of Carbopol 934P were prepared by dispersing required quantity of Carbopol inrequired quantity of distilled water with continuous stirring and kept overnight for complete hydration. The gel was then modified by the addition ofvarying proportion of hydroxypropyl methylcellulose (HPMC) K4M.Results: The prepared microspheres were evaluated for size distribution, surface morphology by scanning electron microscopy, entrapment efficiency,compatibility by Fourier transform infrared spectroscopy, and differential scanning calorimetry. Entrapment efficiency of all formulations was foundmore than 70%. Microsphere formulation containing drug and polymer in the ratio of 1:2.5 was found to be optimized. Optimized microsphereformulation was then incorporated in gel prepared using Carbopol 934P and HPMC. Prepared gel formulations were studied for viscosity, spreadability,and in-vitro drug release in simulated nasal conditions. Viscosity of the optimized batch of gel was recorded at 1056 centipoise. Drug release wasprolonged for the microsphere-in-gel formulations compared to the microspheres alone. For the optimized batch of gel, cumulative drug release of85.67% was found after 8 hrs.Conclusion: The results suggest that venlafaxine hydrochloride mucoadhesive microsphere-loaded nasal gel would give sustained drug release andsuperior bioavailability in the brain sites.Keywords: Venlafaxine, Chitosan, Mucoadhesive, Microsphere, Nasal gel.

Sign in / Sign up

Export Citation Format

Share Document