scholarly journals Thermal Properties of Lignocellulose Pellets

2017 ◽  
Vol 25 (40) ◽  
pp. 83-90
Author(s):  
Igor Wachter ◽  
Siegfried Hirle ◽  
Karol Balog
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Reaction Enthalpy ◽  
Wood Pellets ◽  
Scanning Calorimetry ◽  
Wood Pellet ◽  
Exothermic Reactions ◽  
Enthalpy Changes ◽  
Dsc Method

Abstract This article deals with the characterization of biomass pellets using Differential Scanning Calorimetry. We used three types of industrially produced and commercially available pellets as samples: wood pellets containing grass, wood pellet containing bark and wood pellets without bark. Each of the samples were examined using the DSC method. Based on the measurements in atmosphere of air and nitrogen temperature, the changes caused by thermal degradation of various kinds of test fuels were observed. Subsequently, limits of exothermic processes, reaction enthalpy changes and the temperature at which exothermic reactions reached peaks were determined.

Synthesis and characterization of novel tetrakis (3-hydroxypropylmercapto)-substituted phthalocyanines

2013 ◽  
Vol 17 (06n07) ◽  
pp. 573-586 ◽  
Author(s):  
Çiğdem Yağcı ◽  
Ahmet Bilgin
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Synthesis And Characterization ◽  
The Novel ◽  
Scanning Calorimetry ◽  
Metal Free ◽  
Visible Spectra ◽  
Ft Ir ◽  
Aromatic Nitro

A phthalonitrile precursor 4-(3-hydroxypropylmercapto)phthalonitrile (3) was synthesized via a base-catalyzed nucleophilic aromatic nitro displacement of 4-nitrophthalonitrile with the 3-mercapto-1-propanol. A novel tetrasubstituted metal-free phthalocyanine (4) ( M = 2 H ) and its metal complexes (5–8) ( M = Zn , Ni , Cu and Co ) bearing 3-hydroxypropylmercapto moieties were prepared by the cyclotetramerization reaction of (3) with the appropriate materials. The visible spectra of the zinc(II) phthalocyanine (5) was recorded with different concentrations and different ions as Ag +, Hg 2+ and Pb 2+ in DMF and also with different solvents as dimethylformamide and pyridine. Fluorescence spectrum of the compound (5) was also studied. Temperature and frequency dependence of AC conductivity for (4–8) was investigated in air and under vacuum and were found to be ~10-8–10-5 S.m-1. Thermal properties of the phthalocyanines were examined by differential scanning calorimetry. All the novel compounds have been characterized by elemental analysis, UV-vis, FT-IR, NMR and MS spectral data and DSC techniques.

Characterization of Main-Chain Liquid Crystal Elastomers by Using Differential Scanning Calorimetry (DSC) Method

2015 ◽  
Vol 1123 ◽  
pp. 69-72 ◽  
Author(s):  
Supardi ◽  
Y. Yusuf ◽  
Harsoyo
Keyword(s):  
Phase Transition ◽  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
Basic Principle ◽  
Main Chain ◽  
Scanning Calorimetry ◽  
Mechanical Effects ◽  
Liquid Crystal Elastomers ◽  
Dsc Method

We performed an experiment to characterize the four samples of main chain liquid crystal elastomers (MCLCEs) by using differential scanning calorimetry (DSC) method. Basic principle of this method is that difference in the amount of heat required to increase the temperature of the sample and reference is measured as a function of temperature. The temperature between the sample and reference is maintained nearly the same throughout the experiment. There were four samples with different concentrations of crosslinker we have taken, namely 8%, 12%, 14%, and 16%. The results showed that the phase transition from nematic to isotropic obtained by this method had correlation with their thermo-mechanical effects.

Photopyroelectric Calorimeter for Phase Transitions Monitoring: Application to Chocolate

2009 ◽  
Vol 1242 ◽  
Author(s):  
E. I. Martínez-Ordoñez ◽  
E. Marín ◽  
J. A. I. Díaz-Góngora ◽  
A. Calderón
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Phase Transitions ◽  
Materials Science ◽  
Scanning Calorimetry ◽  
Characterization Of Materials ◽  
Thermophysical Characterization ◽  
Monitoring Application ◽  
Differential Scanning Calorimetry Technique

ABSTRACTIn this work we report about the design and construction of a simple and cheap calorimeter for phase transitions monitoring using Peltier elements and based in the well known inverse (front) photopyroelectric method for thermophysical characterization of materials. We describe its application for the detection of phase transitions in chocolate samples, as an alternative, for example, to the most widely used and more expensive Differential Scanning Calorimetry technique. The manufacture of chocolate requires an understanding of the chemistry and the physical properties of the product. Thus the involved problems during the confection process are those of the so-called materials science. Among them, those related with tempering are of particular importance. Because the fats in cocoa butter experience the so-called polymorphous crystallization, the primary purpose of tempering is to assure that only the best form is present in the final product. One way to characterize this is by measurement of the temperature dependence of the thermal properties of the chocolate and the monitoring of the temperature at which phase transitions take place. We show that the photopyroelectric method, aided with Peltier cells temperature control, can be a useful choice for this purpose.

Characterization of Five Natural Resins and Waxes by Differential Scanning Calorimetry (DSC)

2011 ◽  
Vol 418-420 ◽  
pp. 643-650 ◽  
Author(s):  
Ru Guo Zhang ◽  
Hong Zhang ◽  
Zheng Zhang ◽  
Hua Zheng ◽  
Ying Feng ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Scanning Calorimetry ◽  
Natural Resin ◽  
Natural Resins ◽  
Thermal Absorption ◽  
Melting And Crystallization ◽  
Excellent Reproducibility

Thermal properties of 5 natural resin and wax samples (shellac, rosin, shellac wax, beeswax, Chinese insect wax) were examined by differential scanning calorimetry (DSC). The DSC melting and crystallization curves of the samples were presented in this paper. Three DSC parameters, To, Tf and ΔT (difference between To and Tf), were selected from each curve. Evaluation results of the parameters showed that they were statistically significant with individual excellent reproducibility. Information was provided by evaluation of changes among thermal absorption or release peaks of the curves in differentiating the five resins and waxes. It was demonstrated in this paper that DSC is rapid, convenient, reliable and accurate to qualitatively identify the resins and waxes mentioned above.

Gelatin and Glycerine-Based Bioadhesive Vaginal Hydrogel

2020 ◽  
Vol 17 (4) ◽  
pp. 303-311
Author(s):  
Roberta Cassano ◽  
Federica Curcio ◽  
Delia Mandracchia ◽  
Adriana Trapani ◽  
Sonia Trombino
Keyword(s):  
Differential Scanning Calorimetry ◽  
Inflammatory Process ◽  
Vaginal Mucosa ◽  
Vaginal Infection ◽  
Scanning Calorimetry ◽  
Time Intervals ◽  
Site Specific ◽  
Release Studies ◽  
Hiv Seropositive

Aim: The work’s aim was the preparation and characterization of a hydrogel based on gelatin and glycerine, useful for site-specific release of benzydamine, an anti-inflammatory drug, able to attenuate the inflammatory process typical of the vaginal infection. Objective: The obtained hydrogel has been characterized by Electronic Scanning Microscopy (SEM) and Differential Scanning Calorimetry (DSC). In addition, due to the precursor properties, the hydrogel exhibits a relevant mucoadhesive activity. Methods: The swelling degree was evaluated at two different pHs and at defined time intervals. In particular, phosphate buffers were used at pH 6.6, in order to mimic the typical conditions of infectious diseases at the vaginal level, particularly for HIV-seropositive pregnant women, and pH 4.6, to simulate the physiological environment. Results: The obtained results revealed that the hydrogel swells up well at both pHs. Conclusion: Release studies conducted at both pathological and physiological pHs have shown that benzydamine is released at the level of the vaginal mucosa in a slow and gradual manner. These data support the hypothesis of the hydrogel use for the site-specific release of benzydamine in the vaginal mucosa.

scholarly journals Improved Processing and Properties for Polyphenylene Oxide Modified by Diallyl Orthophthalate Prepolymer

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2016
Author(s):  
Honghua Wang ◽  
Qilin Mei ◽  
Yujie Ding ◽  
Zhixiong Huang ◽  
Minxian Shi
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Phase Separation ◽  
Dilution Effect ◽  
Gradual Decrease ◽  
Gel Point ◽  
Dynamic Mode ◽  
Curing Process ◽  
Scanning Calorimetry ◽  
Polyphenylene Oxide

Diallyl orthophthalate (DAOP) prepolymer was investigated as a reactive plasticizer to improve the processability of thermoplastics. The rheology of blends of DAOP prepolymer initiated by 2,3-dimethyl-2,3-diphenylbutane (DMDPB) and polyphenylene oxide (PPO) was monitored during the curing process, and their thermal properties and morphology in separated phases were also studied. Differential scanning calorimetry (DSC) results showed that the cure degree of the reactively plasticized DAOP prepolymer was reduced with increasing PPO due to the dilution effect. The increasing amount of the DAOP prepolymer led to a gradual decrease in the viscosity of the blends and the rheology behavior was consistent with the chemical gelation of DAOP prepolymer in blends. This indicated that the addition of the DAOP prepolymer effectively improved processability. The phase separation occurring during curing of the blend and the transition from the static to dynamic mode significantly influences the development of the morphology of the blend corresponding to limited evolution of the conversion around the gel point.

Mechanical and thermal characterization of grafted PP-NCC nanocomposites

2019 ◽  
pp. 089270571987822
Author(s):  
Saud Aldajah ◽  
Mohammad Y Al-Haik ◽  
Waseem Siddique ◽  
Mohammad M Kabir ◽  
Yousef Haik
Keyword(s):  
Thermal Properties ◽  
Interfacial Adhesion ◽  
Thermal Characterization ◽  
Mechanical And Thermal Properties ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Three Point Bending ◽  
Twin Screw ◽  
Thermal Stability Of

This study reveals the enhancement of mechanical and thermal properties of maleic anhydride-grafted polypropylene (PP- g-MA) with the addition of nanocrystalline cellulose (NCC). A nanocomposite was manufactured by blending various percentages of PP, MA, and NCC nanoparticles by means of a twin-screw extruder. The influence of varying the percentages of NCC on the mechanical and thermal behavior of the nanocomposite was studied by performing three-point bending, nanoindentation, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy tests. The novelty of this study stems on the NCC nanoparticles and their ability to enhance the mechanical and thermal properties of PP. Three-point bending and nanoindentation tests revealed improvement in the mechanical properties in terms of strength, modulus, and hardness of the PP- g-MA nanocomposites as the addition of NCC increased. SEM showed homogeneity between the mixtures which proved the presence of interfacial adhesion between the PP- g-MA incorporated with NCC nanoparticles that was confirmed by the FTIR results. DSC and TGA measurements showed that the thermal stability of the nanocomposites was not compromised due to the addition of the coupling agent and reinforced nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document