scholarly journals Graphene oxide modification for enhancing high-density polyethylene properties: a comparison between solvent reaction and melt mixing

2018 ◽  
Vol 39 (1) ◽  
pp. 85-93
Author(s):  
Antimo Graziano ◽  
Shaffiq Jaffer ◽  
Mohini Sain
Keyword(s):  
Graphene Oxide ◽  
High Density Polyethylene ◽  
High Performance ◽  
Stress Transfer ◽  
Cost Effective ◽  
Industrial Applications ◽  
High Density ◽  
Strong Interactions ◽  
Melt Mixing ◽  
Functionalized Graphene Oxide

Abstract Graphene oxide (GO) was chemically modified in xylene with dodecyl amine and hydrazine monohydrate to obtain reduced functionalized graphene oxide (RFGO). Composites of high-density polyethylene (HDPE) and GO were made via solvent reaction, whereas both melt mixing and solvent reaction were used for HDPE-RFGO composites for comparison purposes. Elemental and thermal analysis showed the success of GO modification in grafting amine functionalities onto its structure and restoring most of the original graphene C=C bonds. A significant increase in mechanical properties, thermal stability, and crystallization behavior was observed for HDPE-RFGO (solvent) compared with HDPE and HDPE-GO, proving that homogeneous dispersion of RFGO in the polymer matrix and strong interactions between them resulted in facilitated stress transfer, delayed thermal degradation, and more efficient nucleating effect in inducing the crystal growth of HDPE. A comparison of HDPE-RFGO properties enhancement between the melt mixing method and the solvent reaction method showed that, apart from mechanical behavior, the RFGO contribution was the same, suggesting that the optimization of the ecofriendlier approach (melt) could eventually lead to its total use for the mass production of high-performance, cost-effective, and more environmentally friendly graphene-based thermoplastic polyolefin nanocomposites suitable for highly demanding industrial applications.

Effect of particulate fillers on natural rubber/high-density polyethylene blends for roofing application

2020 ◽  
pp. 096739112093461
Author(s):  
WVWH Wickramaarachchi ◽  
S Walpalage ◽  
SM Egodage
Keyword(s):  
Impact Strength ◽  
Natural Rubber ◽  
High Density Polyethylene ◽  
Thermoplastic Elastomer ◽  
Cost Effective ◽  
Barium Sulphate ◽  
Filler Loading ◽  
High Density ◽  
Melt Mixing ◽  
Excellent Property

Blending of two or more polymers generates a new material, which is more cost-effective than a newly synthesised material. Blending-type thermoplastic elastomer (TPE) is produced by melt-mixing of a thermoplastic with a rubber. These blends have high demands associated with excellent property combinations of the parent materials. Particulate fillers are used in the rubber and plastic industry for property modification and cost reduction. In this work, six particulate fillers, namely, calcium carbonate, barium sulphate (BaSO4), kaolin, talc, Snobrite clay and dolomite were used to develop natural rubber (NR)/high-density polyethylene (HDPE) TPE blends, and the most suitable filler for roofing application was identified. A series of NR/HDPE 20/80 blends were prepared by varying filler loading from 10 phr to 30 phr at 10 phr intervals using a Plasticorder. Mechanical properties, such as tensile strength, hardness, impact strength and tear strength, and gel content of the blends were investigated. The addition of talc, dolomite and kaolin to NR/HDPE blend showed reduced impact strength, which is the most important property for a roofing application. The other three fillers showed improved impact strength at specific loadings. The blend with 30 phr of BaSO4 was identified as the best blend, as per the overall performance.

Improvement of the Properties of Polyethylene with Chlorinated Polyethylene (CPE)

2003 ◽  
Vol 11 (2) ◽  
pp. 115-122
Author(s):  
Kálmán Marossy ◽  
Pál Bárczy
Keyword(s):  
High Density Polyethylene ◽  
Industrial Applications ◽  
Mechanical Tests ◽  
High Density ◽  
Structural Units ◽  
Chlorinated Polyethylene ◽  
X Ray ◽  
Dynamic Mechanical ◽  
X Ray Scattering ◽  
Multiphase Systems

Blends of high density polyethylene (HDPE) and chlorinated polyethylene (CPE) have been tested across the whole concentration range. Polyethylene is used to modify the properties of CPE in the elastomer industry, but modification of the properties of polyethylene with CPE is still not usual. Conventional mechanical tests and dynamic mechanical tests were carried out. The blends were found to be multiphase systems of excellent technological compatibility. Between 10 and 15% by weight CPE increased the modulus of polyethylene. X-ray scattering studies showed that the blends contained structural units not present either in the polyethylene or in the CPE. The blends were melt processable and may have industrial applications, too.

Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite

2017 ◽  
Vol 52 (18) ◽  
pp. 2431-2442 ◽  
Author(s):  
Harun Sepet ◽  
Necmettin Tarakcioglu ◽  
RDK Misra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Density Polyethylene ◽  
Fracture Probability ◽  
High Density ◽  
Impact Behavior ◽  
Inorganic Filler ◽  
Melt Mixing ◽  
The Impact ◽  
Scanning Electron

The main purpose of this work is to study how the morphology of nanofillers and dispersion and distribution level of inorganic nanofiller influence the impact behavior and fracture probability of inorganic filler filled industrial high-density polyethylene nanocomposites. For this study, nanoclay and nano-CaCO3 fillers–high-density polyethylene mixings (0, 1, 3, 5 wt.% high-density polyethylene) was prepared by melt-mixing method using a compounder system. The impact behavior was examined by charpy impact test, scanning electron microscopy, and probability theory and statistics. The level of the dispersion was characterized with scanning electron microscopy energy dispersive X-ray spectroscopy analysis. The results showed rather good dispersion of both of inorganic nanofiller, with a mixture of exfoliated and confined morphology. The results indicated that the impact strength of the industrial nanocomposite decreased with the increase of inorganic particulate content. The impact reliability of the industrial nanocomposites depends on the type of nanofillers and their dispersion and distribution in the matrix.

Review on modification strategies of polyethylene/polypropylene immiscible thermoplastic polymer blends for enhancing their mechanical behavior

2018 ◽  
Vol 51 (4) ◽  
pp. 291-336 ◽  
Author(s):  
Antimo Graziano ◽  
Shaffiq Jaffer ◽  
Mohini Sain
Keyword(s):  
High Performance ◽  
Cost Effective ◽  
Good Method ◽  
Waste Recycling ◽  
Industrial Applications ◽  
Polymer Waste ◽  
Reactive Compatibilization ◽  
Brittle To Ductile Transition ◽  
Commercial Applications ◽  
Effective Product

Blends of polyethylene (PE) and polypropylene (PP) have always been the subject of intense reasearch for encouraging polymer waste recycling while producing new materials for specific applications in a sustainable way. However, being thermodynamically immiscible, these polyolefins form a binary system usually exhibiting lower performances compared with those of the homopolymers. Many studies have been carried out to better understand the PE/PP blend compatibilization for developing a high-performance and cost-effective product. Both nonreactive and reactive compatibilization promote the brittle to ductile transition for a PE/PP blend. However, the final product usually does not meet the requirements for high demanding commercial applications. Therefore, further PE/PP modification with a reinforcing filler, being either synthetic or natural, proved to be a good method for manufacturing high-performance reinforcend polymer blend composites, with superior and tailored properties. This review summarizes the recent progress in compatibilization techniques applied for enhancing the interfacial adhesion between PE and PP. Moreover, future perspectives on better understanding the influence of themodynamics on PE/PP synergy are discussed to introduce more effective compatibilization strategies, which will allow this blend to be used for innovative industrial applications.

Sign in / Sign up

Export Citation Format

Share Document