scholarly journals Reluctance network lumped mechanical & thermal models for the modeling and predesign of concentrated flux synchronous machine

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 692-705 ◽  
Author(s):  
Mohammed Ali Benhamida ◽  
Hamza Ennassiri ◽  
Yacine Amara
Keyword(s):  
Soft Magnetic Materials ◽  
Coupled Analysis ◽  
Electrical Machine ◽  
Permanent Magnet Machines ◽  
Electromagnetic Modeling ◽  
Mechanical Modeling ◽  
Soft Magnetic ◽  
Thermal Models ◽  
Electrical Vehicles ◽  
Reluctance Network

Abstract The aim of this paper is the multi-physical modeling of synchronous permanent magnet machines, dedicated to hybrid electrical vehicles application, using reluctance network lumped mechanical and thermal models. The modeling approaches are presented and validated by comparing the obtained results to those of finite element method with a close look to the airgap modeling and the consideration of soft magnetic materials non-linearity in the electromagnetic modeling. As well as a close look also on the conduction and convection heat coefficients for the machine different regions in the thermal modeling. Finally a focus on the mass, damping and stiffness matrix computation in lumped mechanical modeling taking into account the temperature influence on the materials mechanical properties. In addition a simplified rotating electrical machine is described and multiple coupled analysis were done in order to derive the structure magneto-vibroacoustic performances.

Modeling of the Temperature Dependence of Soft Magnetic Materials

2020 ◽  
Author(s):  
Gereon Goldbeck ◽  
Gerd Bramerdorfer ◽  
Wolfgang Amrhein ◽  
Josef Hinterdorfer ◽  
Bernhard Weis
Keyword(s):  
Temperature Dependence ◽  
Magnetic Materials ◽  
Soft Magnetic Materials ◽  
Soft Magnetic

scholarly journals Effect of the Temperature on the Magnetic and Energetic Properties of Soft Magnetic Composite Materials

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4400
Author(s):  
Luca Ferraris ◽  
Fausto Franchini ◽  
Emir Pošković ◽  
Marco Actis Grande ◽  
Róbert Bidulský
Keyword(s):  
Magnetic Materials ◽  
Eddy Currents ◽  
Electrical Machines ◽  
Soft Magnetic Materials ◽  
Magnetic Composite ◽  
Soft Magnetic ◽  
Soft Magnetic Composite ◽  
Magnetic Performance ◽  
Magnetic Circuits ◽  
Energetic Characterization

In recent years, innovative magnetic materials have been introduced in the field of electrical machines. In the ambit of soft magnetic materials, laminated steels guarantee good robustness and high magnetic performance but, in some high-frequency applications, can be replaced by Soft Magnetic Composite (SMC) materials. SMC materials allow us to reduce the eddy currents and to design innovative 3D magnetic circuits. In general, SMCs are characterized at room temperature, but as electrical machines operate at high temperature (around 100 °C), an investigation analysis of the temperature effect has been carried out on these materials; in particular, three SMC samples with different binder percentages and process parameters have been considered for magnetic and energetic characterization.

scholarly journals The Structure and Magnetic Properties of Rapidly Quenched Fe72Ni8Nb4Si2B14 Alloy

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 5
Author(s):  
Lukasz Hawelek ◽  
Tymon Warski ◽  
Patryk Wlodarczyk ◽  
Marcin Polak ◽  
Przemyslaw Zackiewicz ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Relaxation Process ◽  
Glassy State ◽  
Diffraction Method ◽  
Soft Magnetic Materials ◽  
Process Time ◽  
Complex Permeability ◽  
Soft Magnetic ◽  
Conventional Heat Treatment ◽  
Glass Relaxation

The complex structural and magnetic studies of the annealed rapidly quenched Cu-free Fe72Ni8Nb4Si2B14 alloy (metallic ribbons form) are reported here. Based on the calorimetric results, the conventional heat treatment process (with heating rate 10 °C/min and subsequent isothermal annealing for 20 min) for wound toroidal cores has been optimized to obtain the least lossy magnetic properties (for the minimum value of coercivity and magnetic core losses at 50 Hz). For optimal conditions, the complex permeability in the 104–108 Hz frequency range together with core power losses obtained from magnetic induction dependence up to the frequency of 400 kHz was successfully measured. The average and local crystal structure was investigated by the use of the X-ray diffraction method and the transmission electron microscopy observations and proved its fully glassy state. Additionally, for the three temperature values, i.e., 310, 340 and 370 °C, the glass relaxation process study in the function of annealing time was carried out to obtain a deeper insight into the soft magnetic properties: magnetic permeability and cut-off frequency. For this type of Cu-free soft magnetic materials, the control of glass relaxation process (time and temperature) is extremely important to obtain proper magnetic properties.

Sign in / Sign up

Export Citation Format

Share Document