scholarly journals Development of new catalytic processes for processing petroleum feedstock

2017 ◽  
Vol 89 (10) ◽  
pp. 1579-1585
Author(s):  
Vladimir Kapustin ◽  
Elena Chernysheva ◽  
Alexandra Maximova ◽  
Yulia Zinchenko
Keyword(s):  
Oil And Gas ◽  
New Technologies ◽  
Great Influence ◽  
Field Research ◽  
Climatic Conditions ◽  
Oil Refining ◽  
Catalytic Systems ◽  
Oil Residue ◽  
Conversion Level ◽  
Heavy Oil Residue

AbstractCurrently such factors as the use of heavier feedstocks, permanent strengthening of requirements to oil and gas product quality, introduction of technical regulations for oil products, which, in turn, necessitate the development of new technologies and catalysts, have a great influence on the global oil-refining and petrochemical industry development. Recently, a special attention is given to the development of new catalysts and processes for producing middle distillate fuels suitable for cold and arctic climatic conditions. Catalytic hydrodewaxing and isodewaxing processes are the most efficient in this field. Research into controlling a functional structure of catalysts and creation of catalytic systems based on zirconium dioxide modified by tungstate anions are of outstanding interest. The trend of the use of heavier petroleum feedstocks and the need to improve the oil conversion level demand will be based on destruction of high-molecular-weight compound structures with producing light and middle cuts. So, the most important processes for heavy oil residue conversion are those enabling to control transformations of resinous-asphaltenic materials by using nanoscale catalytic systems. One of the examples of the industrial implementation of technologies using suspended catalysts is the hydroconversion process implemented currently at AO TANECO (lisencer: TIPS RAS; general designer: OAO VNIPIneft).

scholarly journals The Prospects of Using the Mechanical Activation Method in the Technological Processes of Oil and Gas Production

2019 ◽  
pp. 76-82
Author(s):  
M. M. Orfanova
Keyword(s):  
Mechanical Activation ◽  
Oil And Gas ◽  
New Technologies ◽  
Gas Production ◽  
Fuel Oil ◽  
Oil Refining ◽  
Cement Stone ◽  
Oil And Gas Production ◽  
Mechanical Loads ◽  
Technological Processes

The need to improve the technological processes of raw fuel resources processing, to search for new technologies and to involve oil and gas waste production wastes as anthropogenic resources becomes urgent. The main directions of using the effects of the mechanical activation of substances in the technological processes of oil and gas production are analyzed.  A brief description of the method of mechanical activation is provided. The prospect of using the method of mechanical activation to solve the problem of waste disposal is shown. The author analyzes the main directions of mechanical activation influence used for changing the composition and properties of hydrocarbons and considers the possibilities of mechanical activation of a substance as an efficient way for accelerating the mechano-chemical processes that occur in hydrocarbons due to intense mechanical loads. The article generalizes the research results concerning the effect of mechanical activation on changes in the physical-chemical properties of oil, fuel oil, bottoms and sludge. The results of using mechanical activation for the preparation of plug-back mixtures based on silica sand and quartziferous waste are summarized. The laboratory research was carried out at a centrifugal-planetary mill. It is established that under the conditions of mechanical activation of hydrocarbons their destruction occurs. The process of transformations is a chain nature. The areas of mechanical and chemical transformations, change of fraction content in residual fuel oil, bottom products, and natural gasoline have been investigated. It has been established that destruction of hydrocarbon fractions takes place. The author demonstrates that processing modes, time and mechanical loads affect the course of hydrocarbon destruction, and its results depend on the type of substance. The researcher proves that it is promising to use the method of mechanical activation to control the properties of mineral flour obtained on the basis of oil sludge. The results of the research indicate clearly that it is possible to get different volume of the light cuts yield by regulating the modes of hydrocarbons processing. The author shows the possibility of increasing the depth of oil refining, as well as the possibility of obtaining a cement mixture with the addition of up to 30% of mechanically activated quartziferous additive without deteriorating the characteristics of cement stone achieved. The method of mechanical activation is promising for the utilization of the wastes of oil and gas complex, as these wastes can be considered the anthropogenic raw materials.

scholarly journals Prospects of Using the New Technologies in Oil and Gas Industry of Kazakhstan

2016 ◽  
Vol 2 (1) ◽  
pp. 35
Author(s):  
N.K. Nadirov ◽  
S.B. Nurzhanova
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
New Technologies ◽  
Oil And Gas Industry ◽  
Oil Refining ◽  
Gas Industry

<p>In this review, prospects of using the new technologies in oil and gas industry of Kazakhstan are presented. The new technologies for solving of oil recovery of problem, transporting and oil refining depth considered.</p>

Financial and Economic Support of Innovation Processes in the Russian Fuel and Energy Complex

2019 ◽  
Vol 12 (3) ◽  
pp. 77-85
Author(s):  
L. D. Kapranova ◽  
T. V. Pogodina
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Oil And Gas ◽  
New Technologies ◽  
Innovative Development ◽  
Oil Reserves ◽  
Energy Complex ◽  
Innovation Activities ◽  
Substantial Investment ◽  
The Government

The subject of the research is the current state of the fuel and energy complex (FEC) that ensures generation of a significant part of the budget and the innovative development of the economy.The purpose of the research was to establish priority directions for the development of the FEC sectors based on a comprehensive analysis of their innovative and investment activities. The dynamics of investment in the fuel and energy sector are considered. It is noted that large-scale modernization of the fuel and energy complex requires substantial investment and support from the government. The results of the government programs of corporate innovative development are analyzed. The results of the research identified innovative development priorities in the power, oil, gas and coal sectors of the fuel and energy complex. The most promising areas of innovative development in the oil and gas sector are the technologies of enhanced oil recovery; the development of hard-to-recover oil reserves; the production of liquefied natural gas and its transportation. In the power sector, the prospective areas are activities aimed at improving the performance reliability of the national energy systems and the introduction of digital technologies. Based on the research findings, it is concluded that the innovation activities in the fuel and energy complex primarily include the development of new technologies, modernization of the FEC technical base; adoption of state-of-the-art methods of coal mining and oil recovery; creating favorable economic conditions for industrial extraction of hard-to-recover reserves; transition to carbon-free fuel sources and energy carriers that can reduce energy consumption and cost as well as reducing the negative FEC impact on the environment.

Ghana's petroleum industry: expectations, frustrations and anger in coastal communities

2020 ◽  
Vol 58 (3) ◽  
pp. 397-424
Author(s):  
Jesse Salah Ovadia ◽  
Jasper Abembia Ayelazuno ◽  
James Van Alstine
Keyword(s):  
Oil And Gas ◽  
Local Development ◽  
Petroleum Industry ◽  
Field Research ◽  
Gas Production ◽  
Oil Field ◽  
Oil And Gas Production ◽  
High Expectations ◽  
Petroleum Resources ◽  
Negative Impacts

ABSTRACTWith much fanfare, Ghana's Jubilee Oil Field was discovered in 2007 and began producing oil in 2010. In the six coastal districts nearest the offshore fields, expectations of oil-backed development have been raised. However, there is growing concern over what locals perceive to be negative impacts of oil and gas production. Based on field research conducted in 2010 and 2015 in the same communities in each district, this paper presents a longitudinal study of the impacts (real and perceived) of oil and gas production in Ghana. With few identifiable benefits beyond corporate social responsibility projects often disconnected from local development priorities, communities are growing angrier at their loss of livelihoods, increased social ills and dispossession from land and ocean. Assuming that others must be benefiting from the petroleum resources being extracted near their communities, there is growing frustration. High expectations, real and perceived grievances, and increasing social fragmentation threaten to lead to conflict and underdevelopment.

scholarly journals Production of High Purity Biosurfactants Using Heavy Oil Residues as Carbon Source

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3557
Author(s):  
Athina Mandalenaki ◽  
Nicolas Kalogerakis ◽  
Eleftheria Antoniou
Keyword(s):  
Carbon Source ◽  
Heavy Oil ◽  
Oil Pollution ◽  
Batch Reactor ◽  
Production Method ◽  
Promising Alternative ◽  
Heavy Oil Residues ◽  
Oil Residue ◽  
Increasing Demand ◽  
Heavy Oil Residue

Typically, oil pollution cleanup procedures following first response actions include dispersion. Crude oil is biodegradable, and its bioavailability can be increased when dispersed into very fine droplets by means of chemical surfactants. Although their use is widely spread in many applications, the latter may prove toxic, depending on the extent of use. The use of biological means, such as bioremediation and biosurfactants, has emerged over the past years as a very promising ‘green’ alternative technology. Biosurfactants (BSs) are amphiphilic molecules produced by microorganisms during biodegradation, thus increasing the bioavailability of the organic pollutants. It is their biodegradability and low toxicity that render BSs as a very promising alternative to the synthetic ones. Alcanivorax borkumensis SK2 strain ability to produce BSs, without any impurities from the substrate, was investigated. The biosurfactant production was scaled up by means of a sequencing batch reactor (SBR) and a heavy oil residue substrate as the carbon source. The product is free from substrate impurities, and its efficiency is tested on oil bioremediation in the marine environment. The product’s dispersion efficiency was determined by the baffled flask test. The production method proposed can have a significant impact to the market, given the ever-increasing demand for ecologically friendly, reliable, commercially viable and economically competitive environmental cleanup techniques.

Research into Thermocatalytic Propane-to-Propylene Synthesis Using Iron-Containing Composite Carbon Materials

2021 ◽  
pp. 100-114
Author(s):  
E.B. Markova ◽  
A.G. Cherednichenko ◽  
L.S. Akhmedova ◽  
Yu.M. Averina ◽  
Yu.M. Serov
Keyword(s):  
Carbon Nanotubes ◽  
Iron Oxide ◽  
Service Life ◽  
Oil And Gas ◽  
Carbon Matrix ◽  
Propane Conversion ◽  
Reaction Products ◽  
Chemical Production ◽  
Catalytic Systems ◽  
Propylene Selectivity

The development of modern thermocatalytic technologies for processing oil and gas raw materials is one of the promising areas for the advancement of chemical production. New highly efficient catalytic systems with the required technical characteristics and long service life play an essential role in solving these issues. The paper focuses on obtaining propylene by selective propane dehydrogenation. In the course of the experiments, composite iron-containing catalysts were synthesized, in which the active component is iron oxide in combination with an inert carbon matrix. FAS activated carbon and carbon nanotubes were used as the matrix. As a result of the synthesis on the catalyst surface it was possible to obtain catalytic centers that transfer electrons by changing the degree of iron oxidation when converting the starting materials into the target reaction products. Findings of research show that the obtained iron-containing catalysts significantly increase the efficiency of the process in comparison with the efficiency of thermal cracking of propane. Thus, the Fe3+/FAS catalyst showed a conversion rate of the initial reagent of 68 % and a propylene selectivity of about 42 %. Further transition to catalytic systems based on singlelayer and double-layer carbon nanotubes modified with iron oxide (Fe3+/CNTI and Fe3+/CNTII) made it possible to obtain propane conversion up to 37--40 % with a decrease in propylene selectivity to 29--30 %. Studies of the service life of the synthesized catalytic systems and the possibility of their regeneration show that, with account for the regeneration, the activity of the catalysts and the main technical characteristics of the propane-to-propylene cracking process remain unchanged for 10 working cycles

The Use of a Sensor Modules System for Measuring Drilling Parameters in a Bit, Significantly Reduces the Construction Time of Wells in Eastern Siberia

2021 ◽  
Author(s):  
Andrey Alexandrovich Rebrikov ◽  
Anton Anatolyevich Koschenkov ◽  
Anastasiya Gennadievna Rakina ◽  
Igor Dmitrievich Kortunov ◽  
Nikita Vladimirovich Koshelev ◽  
...  
Keyword(s):  
Oil And Gas ◽  
New Technologies ◽  
Field Tests ◽  
Depth Of Cut ◽  
Drilling Process ◽  
Eastern Siberia ◽  
Construction Time ◽  
Stage Of Development ◽  
Drilling Parameters ◽  
Pdc Bit

Abstract Currently, production and exploration drilling has entered a stage of development where one of the highest priority goals is to reduce the time for well construction with new technologies and innovations. One of the key components in this aspect is the utilizing of the latest achievements in the design and manufacture of rock cutting tools – drill bits. This article presents some new ideas on methods for identifying different types of vibrations when drilling with PDC bits using a system of sensors installed directly into the bit itself. In the oil and gas fields of Eastern Siberia, one of the main reasons for ineffective drilling with PDC bits are vibrations, which lead to premature wear of the cutting structure of the bit and the achievement of low ROPs in the dolomite and dolerite intervals. For efficient drilling of wells of various trajectories with a bottom hole assembly (BHA), including a downhole motor (PDM) and a PDC bit, special attention is paid to control of the bit by limiting the depth of cut, as well as the level of vibrations that occur during drilling process. Often, the existing complex of surface and BHA equipment fails to identify vibrations that occur directly on the bit, as well as to establish the true cause of their occurrence. Therefore, as an innovative solution to this problem, a system of sensors installed directly into the bit itself is proposed. The use of such a system makes it possible to determine the drilling parameters, differentiated depending on the lithological properties of rocks, leading to an increase in vibration impact. Together with the Operators, tests have been successfully carried out, which have proven the effectiveness of the application of this technology. The data obtained during the field tests made it possible to determine the type and source of vibration very accurately during drilling. In turn, this made it possible to precisely adjust the drilling parameters according to the drilled rocks, to draw up a detailed road map of effective drilling in a specific interval. Correction of drilling parameters based on the analysis of data obtained from sensors installed in the bit made it possible to reduce the resulting wear of the PDC bit cutting structure and, if necessary, make changes to the bit design to improve the technical and economic indicators. Thus, the use of a system of sensors for measuring the drilling parameters in a bit ensured the dynamic stability of the entire BHA at the bottomhole when drilling in rocks of different hardness, significantly reduced the wear of the drilling tools and qualitatively improved the drilling performance.

Mining the air: Political ecologies of the circular carbon economy

2021 ◽  
pp. 251484862110614
Author(s):  
Holly Jean Buck
Keyword(s):  
Fossil Fuels ◽  
Oil And Gas ◽  
New Technologies ◽  
Oil And Gas Industry ◽  
Carbon Utilization ◽  
Gas Industry ◽  
The Public ◽  
Fossil Carbon ◽  
Political Ecologies ◽  
Carbon Economy

Can fossil-based fuels become carbon neutral or carbon negative? The oil and gas industry is facing pressure to decarbonize, and new technologies are allowing companies and experts to imagine lower-carbon fossil fuels as part of a circular carbon economy. This paper draws on interviews with experts, ethnographic observations at carbontech and carbon management events, and interviews with members of the public along a suggested CO2 pipeline route from Iowa to Texas, to explore: What is driving the sociotechnical imaginary of circular fossil carbon among experts, and what are its prospects? How do people living in the landscapes that are expected to provide carbon utilization and removal services understand their desirability and workability? First, the paper examines a contradiction in views of carbon professionals: while experts understand the scale of infrastructure, energy, and capital required to build a circular carbon economy, they face constraints in advocating for policies commensurate with this scale, though they have developed strategies for managing this disconnect. Second, the paper describes views from the land in the central US, surfacing questions about the sustainability of new technologies, the prospect of carbon dioxide pipelines, and the way circular carbon industries could intersect trends of decline in small rural towns. Experts often fail to consider local priorities and expertise, and people in working landscapes may not see the priorities and plans of experts, constituting a “double unseeing.” Robust energy democracy involves not just resistance to dominant imaginaries of circular carbon, but articulation of alternatives. New forms of expert and community collaboration will be key to transcending this double unseeing and furthering energy democracy.

Artificial Intelligence and Robotics in the Oil Industry: Will it Take My Job?

2021 ◽  
Author(s):  
Armstrong Lee Agbaji
Keyword(s):  
Artificial Intelligence ◽  
Oil And Gas ◽  
New Technologies ◽  
Oil Industry ◽  
Oil And Gas Industry ◽  
Human Robot Interaction ◽  
Gas Industry ◽  
Deep Dive ◽  
The Future ◽  
And Robotics

Abstract Historically, the oil and gas industry has been slow and extremely cautious to adopt emerging technologies. But in the Age of Artificial Intelligence (AI), the industry has broken from tradition. It has not only embraced AI; it is leading the pack. AI has not only changed what it now means to work in the oil industry, it has changed how companies create, capture, and deliver value. Thanks, or no thanks to automation, traditional oil industry skills and talents are now being threatened, and in most cases, rendered obsolete. Oil and gas industry day-to-day work is progressively gravitating towards software and algorithms, and today’s workers are resigning themselves to the fact that computers and robots will one day "take over" and do much of their work. The adoption of AI and how it might affect career prospects is currently causing a lot of anxiety among industry professionals. This paper details how artificial intelligence, automation, and robotics has redefined what it now means to work in the oil industry, as well as the new challenges and responsibilities that the AI revolution presents. It takes a deep-dive into human-robot interaction, and underscores what AI can, and cannot do. It also identifies several traditional oilfield positions that have become endangered by automation, addresses the premonitions of professionals in these endangered roles, and lays out a roadmap on how to survive and thrive in a digitally transformed world. The future of work is evolving, and new technologies are changing how talent is acquired, developed, and retained. That robots will someday "take our jobs" is not an impossible possibility. It is more of a reality than an exaggeration. Automation in the oil industry has achieved outcomes that go beyond human capabilities. In fact, the odds are overwhelming that AI that functions at a comparable level to humans will soon become ubiquitous in the industry. The big question is: How long will it take? The oil industry of the future will not need large office complexes or a large workforce. Most of the work will be automated. Drilling rigs, production platforms, refineries, and petrochemical plants will not go away, but how work is done at these locations will be totally different. While the industry will never entirely lose its human touch, AI will be the foundation of the workforce of the future. How we react to the AI revolution today will shape the industry for generations to come. What should we do when AI changes our job functions and workforce? Should we be training AI, or should we be training humans?

Sign in / Sign up

Export Citation Format

Share Document