scholarly journals SDN-Based WAN Optimization: PCE Implementation in Multi-Domain MPLS Networks Supported By BGP-LS

2017 ◽  
Vol 22 (1) ◽  
pp. 35-48 ◽  
Author(s):  
Grzegorz Rzym ◽  
Krzysztof Wajda ◽  
Piotr Chołda
Keyword(s):  
Traffic Engineering ◽  
High Speed ◽  
Experimental Investigations ◽  
Optimization Approach ◽  
Path Delay ◽  
Path Computation ◽  
Flexible Resource ◽  
Virtual Routers ◽  
Set Up ◽  
Sdn Controller

Abstract In order to provide efficient and flexible resource management and path set-up in high-speed MPLS/GMPLS networks, the PCE (Path Computation Element) architecture was proposed by IETF. Implementation of a central module for the path set-up enables network operators to run path establishment operations for applications with explicitly defined objective functions and QoS requirements. The paper reports on recent research and experimental investigations with PCE-based path computation performed according to the 3- layered traffic engineering (TE) system consisting of: (1) a PCE module equipped with the IBM Cplex LP solver used in the highest layer 3, and (2) a SDN controller in the intermediate layer 2 responsible for transferring path setup requests towards virtual routers in the lowest layer 1. The presented results show usefulness of the PCE-supporting architecture with an SDN controller and applicability of bandwidth-oriented optimization based on real-time focused constraints (path delay limits). We emphasise that even a simple optimization approach shows the power provided by the SDN, i.e., flexibility of flows. This property is in practice not feasible in classical IP or MPLS networks, that is the usage of flow-based routing provided by network programmability really opens opportunities in network tuning

Parametric Investigation of Circumferential Grooves on Compressor Rotor Performance

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
Yanhui Wu ◽  
Wuli Chu ◽  
Haoguang Zhang ◽  
Qingpeng Li
Keyword(s):  
Numerical Investigation ◽  
High Speed ◽  
Orthogonal Experiment ◽  
Experimental Investigations ◽  
Small Scale ◽  
Stall Margin ◽  
Compressor Rotor ◽  
Set Up ◽  
Compound Effect ◽  
Unloading Effect

This paper presents numerical and experimental investigations about grooved casing treatment with the help of a high-speed small-scale compressor rotor. First, the numerical investigation seeks to offer a contribution of understanding the working mechanism by which circumferential grooves improve stall margin. It is found that stall margin gain due to the presence of circumferential grooves arises from the suction-injection effect and the near-tip unloading effect. Based on that, the philosophy of design of experiment is then set up. Finally, parametric studies are carried out through systematical experiments. It is found that the orthogonal experiment and the factorial analyses are successful in identifying the “best casing configuration” in terms of stall margin improvement. However, the ineffectiveness of the deduction from simulations suggests that the secondary flow circulations on stall margin gain should not be neglected, and the overall contribution of each groove to stall margin gain depends on its unloading effect and the compound effect of suction-injection. Further numerical investigation will focus on how to set up quantitative criteria to evaluate the compound effect of suction-injection and the unloading effect on stall margin gain respectively in each groove.

scholarly journals Modeling the Excess Velocity of Low-Viscous Taylor Droplets in Square Microchannels

Fluids ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 162 ◽  
Author(s):  
Thorben Helmers ◽  
Philip Kemper ◽  
Jorg Thöming ◽  
Ulrich Mießner
Keyword(s):  
High Speed ◽  
Process Intensification ◽  
Continuous Phase ◽  
Channel Cross Section ◽  
Optimization Approach ◽  
Mean Flow ◽  
Bypass Flow ◽  
Wall Film ◽  
Proposed Model ◽  
The Mean

Microscopic multiphase flows have gained broad interest due to their capability to transfer processes into new operational windows and achieving significant process intensification. However, the hydrodynamic behavior of Taylor droplets is not yet entirely understood. In this work, we introduce a model to determine the excess velocity of Taylor droplets in square microchannels. This velocity difference between the droplet and the total superficial velocity of the flow has a direct influence on the droplet residence time and is linked to the pressure drop. Since the droplet does not occupy the entire channel cross-section, it enables the continuous phase to bypass the droplet through the corners. A consideration of the continuity equation generally relates the excess velocity to the mean flow velocity. We base the quantification of the bypass flow on a correlation for the droplet cap deformation from its static shape. The cap deformation reveals the forces of the flowing liquids exerted onto the interface and allows estimating the local driving pressure gradient for the bypass flow. The characterizing parameters are identified as the bypass length, the wall film thickness, the viscosity ratio between both phases and the C a number. The proposed model is adapted with a stochastic, metaheuristic optimization approach based on genetic algorithms. In addition, our model was successfully verified with high-speed camera measurements and published empirical data.

scholarly journals Numerical and Experimental Investigations on Vocal Fold Approximation in Healthy and Simulated Unilateral Vocal Fold Paralysis

2021 ◽  
Vol 11 (4) ◽  
pp. 1817
Author(s):  
Zheng Li ◽  
Azure Wilson ◽  
Lea Sayce ◽  
Amit Avhad ◽  
Bernard Rousseau ◽  
...  
Keyword(s):  
Computational Model ◽  
Vocal Fold ◽  
High Speed ◽  
Computational Models ◽  
Ex Vivo ◽  
Vocal Fold Paralysis ◽  
Future Application ◽  
Experimental Investigations ◽  
Type I ◽  
Mri Scans

We have developed a novel surgical/computational model for the investigation of unilat-eral vocal fold paralysis (UVFP) which will be used to inform future in silico approaches to improve surgical outcomes in type I thyroplasty. Healthy phonation (HP) was achieved using cricothyroid suture approximation on both sides of the larynx to generate symmetrical vocal fold closure. Following high-speed videoendoscopy (HSV) capture, sutures on the right side of the larynx were removed, partially releasing tension unilaterally and generating asymmetric vocal fold closure characteristic of UVFP (sUVFP condition). HSV revealed symmetric vibration in HP, while in sUVFP the sutured side demonstrated a higher frequency (10–11%). For the computational model, ex vivo magnetic resonance imaging (MRI) scans were captured at three configurations: non-approximated (NA), HP, and sUVFP. A finite-element method (FEM) model was built, in which cartilage displacements from the MRI images were used to prescribe the adduction, and the vocal fold deformation was simulated before the eigenmode calculation. The results showed that the frequency comparison between the two sides was consistent with observations from HSV. This alignment between the surgical and computational models supports the future application of these methods for the investigation of treatment for UVFP.

scholarly journals Towards an Efficient CNN Inference Architecture Enabling In-Sensor Processing

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1955
Author(s):  
Md Jubaer Hossain Pantho ◽  
Pankaj Bhowmik ◽  
Christophe Bobda
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
Image Sensor ◽  
Machine Learning Algorithms ◽  
Hierarchical Optimization ◽  
Computation Method ◽  
Optimization Approach ◽  
Efficient Computation ◽  
Feature Maps ◽  
Dynamic Power

The astounding development of optical sensing imaging technology, coupled with the impressive improvements in machine learning algorithms, has increased our ability to understand and extract information from scenic events. In most cases, Convolution neural networks (CNNs) are largely adopted to infer knowledge due to their surprising success in automation, surveillance, and many other application domains. However, the convolution operations’ overwhelming computation demand has somewhat limited their use in remote sensing edge devices. In these platforms, real-time processing remains a challenging task due to the tight constraints on resources and power. Here, the transfer and processing of non-relevant image pixels act as a bottleneck on the entire system. It is possible to overcome this bottleneck by exploiting the high bandwidth available at the sensor interface by designing a CNN inference architecture near the sensor. This paper presents an attention-based pixel processing architecture to facilitate the CNN inference near the image sensor. We propose an efficient computation method to reduce the dynamic power by decreasing the overall computation of the convolution operations. The proposed method reduces redundancies by using a hierarchical optimization approach. The approach minimizes power consumption for convolution operations by exploiting the Spatio-temporal redundancies found in the incoming feature maps and performs computations only on selected regions based on their relevance score. The proposed design addresses problems related to the mapping of computations onto an array of processing elements (PEs) and introduces a suitable network structure for communication. The PEs are highly optimized to provide low latency and power for CNN applications. While designing the model, we exploit the concepts of biological vision systems to reduce computation and energy. We prototype the model in a Virtex UltraScale+ FPGA and implement it in Application Specific Integrated Circuit (ASIC) using the TSMC 90nm technology library. The results suggest that the proposed architecture significantly reduces dynamic power consumption and achieves high-speed up surpassing existing embedded processors’ computational capabilities.

Study on Magnetic Barrel Machine Equipped with Three-Dimensional Arrangement of Magnets

2007 ◽  
Vol 329 ◽  
pp. 761-766 ◽  
Author(s):  
Y. Zhang ◽  
Masato Yoshioka ◽  
Shin-Ichiro Hira
Keyword(s):  
High Speed ◽  
Permanent Magnets ◽  
Three Dimensional ◽  
Video Camera ◽  
High Speed Video ◽  
High Speed Video Camera ◽  
The Media ◽  
Set Up

At present, a commercially available magnetic barrel machine equipped with permanent magnets has some faults arising from constructional reason. That is, grinding or finishing ability is different from place to place in the machining region, resulting in the limitation on the region we can use in the container of workpieces. Therefore, in this research, authors made the new magnetic barrel machine equipped with three dimensional (3D) magnet arrangement to overcome these faults. The grinding ability of the new 3D magnetic barrel machine converted was experimentally examined, and compared with that of the traditional magnetic barrel machine. As a result, it was shown that we can use much broader region in the new 3D machine. It was also shown that the grinding ability became higher. The distribution of barrel media in action was recorded by means of a high speed video camera. It was clarified that the media rose up higher and were distributed more uniformly in the container by the effect of the magnet block newly set up. It was supposed that this must be the reason for the above-mentioned improvement of grinding ability.

scholarly journals High Efficiency Generalized Parallel Counters for Look-Up Table Based FPGAs

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Burhan Khurshid ◽  
Roohie Naaz Mir
Keyword(s):  
Power Dissipation ◽  
High Speed ◽  
High Efficiency ◽  
Critical Path ◽  
Fir Filters ◽  
Path Delay ◽  
Look Up Table ◽  
Improved Performance ◽  
Ip Cores ◽  
Low Efficiency

Generalized parallel counters (GPCs) are used in constructing high speed compressor trees. Prior work has focused on utilizing the fast carry chain and mapping the logic onto Look-Up Tables (LUTs). This mapping is not optimal in the sense that the LUT fabric is not fully utilized. This results in low efficiency GPCs. In this work, we present a heuristic that efficiently maps the GPC logic onto the LUT fabric. We have used our heuristic on various GPCs and have achieved an improvement in efficiency ranging from 33% to 100% in most of the cases. Experimental results using Xilinx 5th-, 6th-, and 7th-generation FPGAs and Stratix IV and V devices from Altera show a considerable reduction in resources utilization and dynamic power dissipation, for almost the same critical path delay. We have also implemented GPC-based FIR filters on 7th-generation Xilinx FPGAs using our proposed heuristic and compared their performance against conventional implementations. Implementations based on our heuristic show improved performance. Comparisons are also made against filters based on integrated DSP blocks and inherent IP cores from Xilinx. The results show that the proposed heuristic provides performance that is comparable to the structures based on these specialized resources.

Effect of Nanosized Filler on Matrix Dominated Properties of Fiber Reinforced Epoxy

2011 ◽  
Author(s):  
Yuanxin Zhou ◽  
Shaik Jeelani
Keyword(s):  
Compression Strength ◽  
High Speed ◽  
High Vacuum ◽  
Trapped Air ◽  
Nano Fiber ◽  
Open Hole ◽  
Set Up ◽  
Mechanical Agitator ◽  
Laminar Shear ◽  
Nanosized Filler

In this study, a high-intensity ultrasonic liquid processor was used to obtain a homogeneous molecular mixture of epoxy resin and carbon nano fiber. The carbon nano fibers were infused into the part A of SC-15 (diglycidylether of Bisphenol A) through sonic cavitations and then mixed with part B of SC-15 (cycloaliphatic amine hardener) using a high-speed mechanical agitator. The trapped air and reaction volatiles were removed from the mixture using high vacuum. Nanophased epoxy with 2 wt.% CNF was then utilized in a vacuum assisted resin transfer molding (VARTM) set up with carbon fabric to fabricate laminated composites. The effectiveness of CNF addition on matrix dominated properties of composites has been evaluated by compression, open hole compression and inter-laminar shear. The compression strength, open hole compression strength and ILS were improved by 21%, 23% and 15%, respectively as compared to the neat composite.

Leakage Flow Investigations on a Through-Wall Crack Related to Thermal Fatigue of Nuclear Power Plant Piping

2017 ◽  
Author(s):  
Stefan Schmid ◽  
Rudi Kulenovic ◽  
Eckart Laurien
Keyword(s):  
Experimental Data ◽  
Nuclear Power ◽  
Numerical Models ◽  
Measurement Techniques ◽  
Experimental Investigations ◽  
Leakage Flow ◽  
Test Rig ◽  
Reduced Pressure ◽  
Flow Rates ◽  
Set Up

For the validation of empirical models to calculate leakage flow rates in through-wall cracks of piping, reliable experimental data are essential. In this context, the Leakage Flow (LF) test rig was built up at the IKE for measurements of leakage flow rates with reduced pressure (maximum 1 MPA) and temperature (maximum 170 °C) compared to real plant conditions. The design of the test rig enables experimental investigations of through-wall cracks with different geometries and orientations by means of circular blank sheets with integrated cracks which are installed in the tubular test section of the test rig. In the paper, the experimental LF set-up and used measurement techniques are explained in detail. Furthermore, first leakage flow measurement results for one through-wall crack geometry and different imposed fluid pressures at ambient temperature conditions are presented and discussed. As an additional aspect the experimental data are used for the determination of the flow resistance of the investigated leak channel. Finally, the experimental results are compared with numerical results of WinLeck calculations to prove specifically in WinLeck implemented numerical models.

scholarly journals Assessment of the Deterioration State of Post-Installed Bonded Anchors Using Ultrasonic

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2077
Author(s):  
Oliver Zeman ◽  
Michael Schwenn ◽  
Martin Granig ◽  
Konrad Bergmeister
Keyword(s):  
Maximum Load ◽  
Assessment Method ◽  
Load Level ◽  
Experimental Investigations ◽  
Load History ◽  
Anchor System ◽  
Ultrasonic Methods ◽  
Building Maintenance ◽  
History Of ◽  
Set Up

The assessment of already installed anchorages for a possible exceeding of the service load level is a question that is gaining more and more importance, especially in building maintenance. Bonded anchors are of particular interest here, as the detection of a capacity reduction or load exceedance can cause damage to the concrete-bonded mortar behavior. This article investigates the extent to which ultrasonic methods can be used to make a prediction about the condition of anchorages in concrete and about their load history. A promising innovative assessment method has been developed. The challenges in carrying out the experimental investigations are the arrangement of the transducers, the design of the test set-up and the applicability of direct, indirect or semidirect ultrasonic transmission. The experimental investigations carried out on a test concrete mix and a bonded anchor system show that damage to the concrete structure can be detected by means of ultrasound. The results indicate the formation of cracks and therefore a weakening of the response determined by means of direct, indirect and semidirect ultrasonic transmission. However, for application under non-laboratory conditions and on anchors with unknown load history, the calibration with a reference anchor and the identification of the maximum load is required. This enables a referencing of the other loaded anchors to the unloaded conditions and allows an estimation of the load history of individual anchors.

Sign in / Sign up

Export Citation Format

Share Document