Effect of Gap Position in Broken V-rib Roughness Combined with Staggered Rib on Thermohydraulic Performance of Solar Air Heater

Green ◽  
2011 ◽  
Vol 1 (4) ◽  
Author(s):  
Anil K. Patil ◽  
J. S. Saini ◽  
K. Kumar
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Hydraulic Performance ◽  
Solar Air Heater ◽  
Artificial Roughness ◽  
Effective Technique ◽  
Air Heater ◽  
Flow Through ◽  
Absorber Surface

AbstractApplication of artificial roughness on underside of absorber surface has been found to be effective technique to improve thermo hydraulic performance of solar air heaters. In progression to the previous researches, the present study discloses the effect of broken V-rib roughness combined with staggered ribs on heat transfer and friction in a flow through artificially roughened solar air heater duct. The experimentations were performed to collect the data on heat transfer and friction by varying the Reynolds number (Re) between 3000 and 17,000, relative gap position (

Use of artificial roughness to enhance heat transfer in solar air heaters – a review

2010 ◽  
Vol 21 (1) ◽  
pp. 35-51 ◽  
Author(s):  
Thakur Sanjay Kumar ◽  
N.S. Thakur ◽  
Anoop Kumar ◽  
Vijay Mittal
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hydraulic Performance ◽  
Solar Air Heater ◽  
Artificial Roughness ◽  
Transfer Enhancement ◽  
Air Heater ◽  
Roughness Elements

Improvement in the thermo hydraulic performance of a solar air heater can be done by enhancing the heat transfer. In general, heat transfer enhancement techniques are divided into two groups: active and passive techniques. Providing an artificial roughness on a heat transferring surface is an effective passive heat transfer technique to enhance the rate of heat transfer to fluid flow. In this paper, reviews of various artificial roughness elements used as passive heat transfer techniques, in order to improve thermo hydraulic performance of a solar air heater, is done. The objective of this paper is to review various studies, in which different artificial roughness elements are used to enhance the heat transfer rate with little penalty of friction. Correlations developed by various researchers with the help of experimental results for heat transfer and friction factor for solar air heater ducts by taking different roughened surfaces geometries are given in tabular form. These correlations are used to predict the thermo hydraulic performance of solar air heaters having roughened ducts. The objective is to provide a detailed review on heat transfer enhancement by using an artificial roughness technique. This paper will be very helpful for the researchers who are researching new artificial roughness for solar air heater ducts to enhance the heat transfer rate and comparing with artificial roughness already studied by various researchers.

Experimental Investigation of Thermohydraulic Performance of the Solar Air Heater Having Arc-Shaped Ribs With Multiple Gaps

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Sheetal Kumar Jain ◽  
Ghanshyam Das Agrawal ◽  
Rohit Misra
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Nusselt Number ◽  
Friction Factor ◽  
Solar Air Heater ◽  
Artificial Roughness ◽  
Absorber Plate ◽  
Maximum Enhancement ◽  
Air Heater ◽  
Absorber Surface

Abstract In the present research, the thermohydraulic performance of a solar air heater having artificial roughness in the form of arc-shaped ribs with multiple gaps has been investigated experimentally and compared with that of a solar air heater having smooth absorber plate. The performance has been investigated in terms of enhancement in the Nusselt number and friction factor. Results of the present work have also been compared with previously published work. Reynolds number and arc angle (α) were varied from 3000 to 18,000 and 30 deg to 75 deg, respectively. Present roughness results in a higher rate of heat transfer from the absorber surface to air, but it also imposes a penalty in terms of the increased friction factor. Maximum enhancement in Nusselt number, friction factor, and thermohydraulic performance parameter for the roughened absorber surface is found to be 3.74, 2.69, and 2.75 times that of the smooth plate, respectively. Correlations of heat transfer and friction factor for proposed roughness have also been developed.

Heat transfer measurement in a rectangular channel of solar air heater with Winglet type ribs using liquid crystal thermography

2021 ◽  
pp. 1-9
Author(s):  
Amit Kumar ◽  
Apurba Layek
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Liquid Crystal ◽  
Rectangular Channel ◽  
Angle Of Attack ◽  
Solar Air Heater ◽  
Air Heater ◽  
Liquid Crystal Thermography ◽  
Relative Roughness ◽  
Absorber Surface

Abstract This paper deals with the study of heat transfer in solar air heater consisting of Winglet shaped roughness on the absorber plate using liquid crystal thermography technique. The winglet type roughness element was placed on the absorber surface of a rectangular channel solar air heater having an aspect ratio of 4. The absorber surface was heated uniformly by a constant heat flux of 800 W/m2. The non-dimensional roughness parameter considered as relative roughness pitch i.e., P/e, and its values range between 5-12 with Reynolds number (Re) range between 6500 - 22000. The value of angle of attack i.e., alpha and relative roughness width i.e. (W/w) were kept constant, and the relative roughness pitch was varied to measure the heat transfer coefficient. The enhancement in heat transfer has been compared and it is observed that at P/e of 8 for the angle of attack (α) of 60 degrees resulting it's optimum value. The enhancement of heat transfer with the increase in Reynolds number is also noted.

Experimental Investigation of Enhanced Heat Transfer and Pressure Drop in a Solar Air Heater Duct With Discretized Broken V-Rib Roughness

2014 ◽  
Vol 137 (2) ◽  
Author(s):  
Anil Kumar Patil ◽  
J. S. Saini ◽  
Krishna Kumar
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Geometrical Parameters ◽  
Solar Air Heater ◽  
Enhanced Heat Transfer ◽  
Transfer Rates ◽  
Air Heater ◽  
Effective Efficiency ◽  
Flow Through ◽  
Considerable Enhancement

The present study examines the augmentation in heat transfer and friction in a flow through solar air heater duct with discretized broken V-rib roughness. The experimental outcomes pertaining to Reynolds number from 3000 to 17,000, relative gap position (s′/s) from 0.2 to 0.8, relative staggered rib position (p′/p) from 0.2 to 0.8 have been presented and discussed. Discretized broken V-rib roughness brought out considerable enhancement in heat transfer rates over V-rib roughness and smooth duct. Effective efficiency of discretized broken V-rib roughened solar air heater is estimated and geometrical parameters of roughness are optimized with regard to temperature rise parameter and insolation.

scholarly journals CFD Analysis on the Heat Transfer and Fluid Flow of Solar Air Heater having Transverse Triangular Block at the Bottom of Air Duct

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1099
Author(s):  
Hwi-Ung Choi ◽  
Kwang-Hwan Choi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Friction Factor ◽  
Design Parameters ◽  
Solar Air Heater ◽  
Air Heater ◽  
Geometric Conditions ◽  
Computational Fluid Dynamics Analysis ◽  
Triangular Block

In this study, a two-dimensional CFD (computational fluid dynamics) analysis was performed to investigate the heat-transfer and fluid-friction characteristics in a solar air heater having a transverse triangular block at the bottom of the air duct. The Reynolds number, block height (e), pitch (P), and length (l) were chosen as design parameters. The results are validated by comparing the Nusselt number predicted by simulation with available experimental results. Renormalization-group (RNG) k - ε model with enhanced wall-treatment was selected as the most appropriate turbulence model. From the results, it was found that the presence of a transverse triangular block produces a higher Nusselt number than that of smooth air duct. The enhancement in Nusselt number varied from 1.19 to 3.37, according to the geometric conditions investigated. However, the use of transverse triangular block also results in significantly higher friction losses. The thermohydraulic performance (THPP) was also estimated and has a maximum value of 1.001 for height (e) of 20 mm, length (l) of 120 mm, and pitch (P) of 150 mm, at Reynolds number of 8000. Furthermore, in the present study, correlations of the Nusselt number and friction factor were developed as a function of geometrical conditions of the transverse triangular block and Reynolds number, which can be used to predict the value of Nusselt number and friction factor with the absolute percentage deviations of 3.29% and 7.92%, respectively.

Thermal–hydraulic analysis of a solar air heater fitted with a wire-roughened absorber plate

2021 ◽  
pp. 095440892110590
Author(s):  
Nanjundappa Madhukeshwara ◽  
A Alhadhrami ◽  
Hassan A H Alzahrani ◽  
B H Prasanna
Keyword(s):  
Heat Transfer ◽  
Friction Factor ◽  
Efficiency Index ◽  
Hydraulic Performance ◽  
Index Formula ◽  
Solar Air Heater ◽  
Absorber Plate ◽  
Air Heater ◽  
Relative Roughness ◽  
Nusselt Numbers

This study is to evaluate heat transmission and friction in a rectangular solar air heater with a V-shaped wire rib roughness on the absorber plate that operates in fully formed turbulent flow. Additionally, studies are performed to generate prediction equations for the average friction factor, Stanton number, and efficiency index. The Reynolds number [Formula: see text]–[Formula: see text], angle of attack [Formula: see text]20[Formula: see text]–90[Formula: see text]), relative roughness pitch [Formula: see text]–[Formula: see text], relative roughness height [Formula: see text]–[Formula: see text], and the aspect ratio [Formula: see text]–[Formula: see text] was varied. The efficiency index [Formula: see text] is commonly employed as a thermo-hydraulic performance metric. It is computed as [Formula: see text]. The wire roughness and airflow parameters [Formula: see text] are optimized to maximize heat transfer while retaining minimal friction losses. On the basis of resemblance criteria, average Stanton numbers, average Nusselt numbers, and even average friction factors are derived. The results are compared to those obtained with a smooth absorber duct under similar airflow circumstances in order to assess the increase in heat transfer coefficient and friction factor. The [Formula: see text], and [Formula: see text] have a significant influence on thermo–hydraulic performance, according to these studies. With [Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text], the optimal configuration geometry for wire roughness and solar air heater duct is identified.

Sign in / Sign up

Export Citation Format

Share Document