scholarly journals First results in the development of a mobile robot with trajectory planning and object recognition capabilities

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Talgat Islamgozhayev ◽  
Maksat Kalimoldayev ◽  
Arman Eleusinov ◽  
Shokan Mazhitov ◽  
Orken Mamyrbayev

Abstract The use of mobile robots is becoming popular in many areas of service because they ensure safety and good performance while working in dangerous or unreachable locations. Areas of application of mobile robots differ from educational research to detection of bombs and their disposal. Based on the mission of the robot they have different configurations and abilities – some of them have additional arms, cranes and other tools, others use sensors and built-in image processing and object recognition systems to perform their missions. The robot that is described in this paper is mobile robot with a turret mounted on top of it. Different approaches have been tested while searching for best method suitable for image processing and template matching goals. Based on the information from image processing unit the system executes appropriate actions for planning motions and trajectory of the mobile robot.

1991 ◽  
Vol 3 (5) ◽  
pp. 379-386
Author(s):  
Hesin Sai ◽  
◽  
Yoshikuni Okawa

As part of a guidance system for mobile robots operating on a wide and flat floor, such as an ordinary factory or a gymnasium, we have proposed a special-purpose sign. It consists of a cylinder, with four slits, and a fluorescent light, which is placed on the axis of the cylinder. Two of the slits are parallel to each other, and the other two are angled. A robot obtains an image of the sign with a TV camera. After thresholding, we have four bright sets of pixels which correspond to the four slits of the cylinder. We compute by measuring the relative distances between the four points, the distance and the angle to the direction of the sign can be computed using simple geometrical equations. Using a personal computer with an image processing capability, we have investigated the accuracy of the proposed position identification method and compared the experimental results against the theoretical analysis of measured error. The data shows good coincidence between the analysis and the experiments. Finally, we have built a movable robot, which has three microprocessors and a TV camera, and performed several control experiments for trajectory following.


Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5409
Author(s):  
Gonzalo Farias ◽  
Ernesto Fabregas ◽  
Enrique Torres ◽  
Gaëtan Bricas ◽  
Sebastián Dormido-Canto ◽  
...  

This work presents the development and implementation of a distributed navigation system based on object recognition algorithms. The main goal is to introduce advanced algorithms for image processing and artificial intelligence techniques for teaching control of mobile robots. The autonomous system consists of a wheeled mobile robot with an integrated color camera. The robot navigates through a laboratory scenario where the track and several traffic signals must be detected and recognized by using the images acquired with its on-board camera. The images are sent to a computer server that performs a computer vision algorithm to recognize the objects. The computer calculates the corresponding speeds of the robot according to the object detected. The speeds are sent back to the robot, which acts to carry out the corresponding manoeuvre. Three different algorithms have been tested in simulation and a practical mobile robot laboratory. The results show an average of 84% success rate for object recognition in experiments with the real mobile robot platform.


2013 ◽  
Vol 64 (2) ◽  
pp. 84-91 ◽  
Author(s):  
Peter Pásztó ◽  
Peter Hubinský

This paper presents a navigation method for a mobile robot using a visual system. Circular marks with specific colors are used for marking the significant points of the mobile robot’s trajectory that it needs to pass. The colors of the used marks are signalizing the way of their bypassing with the mobile robot (from the left or right side). The mobile robot uses only one camera for the marks recognition task and it is able to determine its own relative position from the detected marks. The image processing and the mobile robot’s trajectory planning algorithm working in real-time are described in this paper.


Author(s):  
Ivany Sarief ◽  
Harfin Yusuf Biu ◽  
Fajar Harismana ◽  
Sepryan Ismail Chandra

To design a system in order to identify an object number plate for the Indonesian format, an initial system is designed, in the form of a vehicle licence plate recognition application using template matching method. The goal of this application is to be implemented to the parking system by identifying the number plate. This system uses the camera for the image capture process, by utilizing image processing technology with the matching correlation template method for recognition to produce a string value from the image. Before doing recognition process, First, the pre processing stage is performed on the input image which includes grayscale, binary, until the segmentation stage before the correlation / comparison process is carried out on the image of Template. The process that occure in the pre-processing unit done for some reason including to make the image lighter and less complex. This process will make the image easer to be processed and also to increase the proses speed of the system. Before aply template matching algorithm to the image output from segmentation process, the image has to be resized first to match the size of the template image stored in data base. This has to done so that the target image and the template image can be match directly with template matching algorithm.  The output of this system is a string value which is refer to the value of the license plate capture by camera used by the system. The problem that arises in the introduction process is how to identify various types of characters with various sizes and shapes so that the string value is the same as the text image. The average success rate of this application is 70% so that further research must be carried out so this system can be implemented into the parking system. Keyword : Image Processing, Template matching, Camera, Number Plate, Matlab


2011 ◽  
Vol 121-126 ◽  
pp. 2416-2420 ◽  
Author(s):  
Yan Fen Mao ◽  
Hans Wiedmann ◽  
Ming Chen

The paper describes an autonomous mobile robot named Robotino®, and how it is used for education of Bachelor-students in the majors AES (Automotive Engineering & Service) as well as in MT (Mechatronics) in CDHAW, Tongji University. A fine positioning project using image processing is introduced, and vision-based functions from Robotino®View are presented. It is sketched out how this system also can be used as a research platform for automotive assistance systems.


Author(s):  
Max Q-H Meng ◽  
◽  
Hong Zhang ◽  

As people attempt to build biomimetic robots and realize automation processes through artificial intelligence, computational intelligence plays a very important role in robotics and automation. This special issue contains several important papers that address various aspects of computational intelligence in robotics and automation. While acknowledging its limited coverage, this special issue offers a range of interesting contributions such as intelligent trajectory planning for flying and land mobile robots, fuzzy decision making, control of rigid and teleoperated robots, modeling of human sensations, and intelligent sensor fusion techniques. Let us scan through these contributions of this special issue. The first paper, "Planar Spline Trajectory Following for an Autonomous Helicopter," by Harbick et al., proposes a technique for planar trajectory following for an autonomous aerial robot. A trajectory is modeled as a planar spline. A behavior-based control system stabilizes the robot and enforces trajectory following of an autonomous helicopter with a reasonable trajectory tracking error on the order of the size of the helicopter (1.8m). In the second paper, "A Biologically Inspired Approach to Collision-Free Path Planning and Tracking Control of a Mobile Robot," by Yang et al., a novel biologically inspired neural network approach is proposed for dynamic collision-free path planning and stable tracking control of a nonholonomic mobile robot in a non-stationary environment, based on shunting equations derived from Hodgkin and Huxley's biological membrane equation. The third paper, "Composite Fuzzy Measure and Its Application to Decision Making," by Kaino and Kaoru, builds a composite fuzzy measure from fuzzy measures defined on fuzzy measurable spaces using composite fuzzy weights by the authors, with a successful application to an automobile factory capital investment decision making problem. In "Intelligent Control of a Miniature Climbing Robot," by Xiao et al., a fuzzy logic based intelligent optimal control system for a miniature climbing robot to achieve precision motion control, minimized power consumption, and versatile behaviors is presented with validation via experimental studies. The fifth paper, "Incorporating Motivation in a Hybrid Robot Architecture," by Stoytchev and Arkin, describes a hybrid mobile robot architecture capable of deliberative planning, reactive control, and motivational drives, which addresses three main challenges for robots living in human-inhabited environments: operating in dynamic and unpredictable environment, dealing with high-level human commands, and engaging human users. Experimental results for a fax delivery mission in a normal office environment are included. In the next paper, "Intelligent Scaling Control for Internet-based Teleoperation," by Liu et al., an adaptive scaling control scheme, with a neural network based time-delay prediction algorithm trained using the maximum entropy principle, is proposed with successful experimental studies on an Internet mobile robot platform. The next paper, "Feature Extraction of Robot Sensor Data Using Factor Analysis for Behavior Learning," by Fung and Liu, discusses important knowledge extraction of sensor data for robot behavior learning using a new approach based on the inter-correlation of sensor data via factor analysis and construction of logical perceptual space by hypothetical latent factors. Experimental results are included to demonstrate the process of logical perceptual space extraction from ultrasonic range data for robot behavior learning. "Trajectory Planning of Mobile Robots Using DNA Computing," by Kiguchi et al., presents an optimal trajectory planning method for mobile robots using Watson-Crick pairing to find the shortest trajectory in the robot working area with the DNA sequences representing the locations of the obstacles removed during the process. The proposed algorithm is especially suitable for computing on a DNA molecular computer. In the ninth paper, "Computational Intelligence for Modeling Human Sensations in Virtual Environments," by Lee and Xu, cascade neural networks with node-decoupled extended Kalman filter training for modeling human sensations in virtual environments are proposed, with a stochastic similarity measure based on hidden Markov models to calculate the relative similarity between model-generated sensations and actual human sensations. A new input selection technique, based on independent component analysis capable of reducing the data size and selecting the stimulus information, is developed and reported. The next paper, "Intelligent Sensor Fusion in Robotic Prosthetic Eye System," by Gu et al., is concerned with the design, sensing and control of a robotic prosthetic eye that moves horizontally in synchronization with the movement of the natural eye. It discusses issues on sensor failure detection and recovery and sensor data fusion techniques using statistical methods and artificial neural network based methods. Simulation and experimental results are included to demonstrate the effectiveness of the results. The final contribution in our collection is a paper by Sun et al., entitled "A Position Control of Direct-Drive Robot Manipulators with PMAC Motors Using Enhanced Fuzzy PD Control." It presents a simple and easy-to-implement position control scheme for direct-drive robot manipulators based on enhanced fuzzy PD control, incorporating two nonlinear tracking differentiators into a conventional PD controller. Experiments on a single-link manipulator directly driven by a permanent magnet AC (PMAC) motor demonstrate the validity of the proposed approach. The Guest Editors would like to thank the contributors and reviewers of this special issue for their time and effort in making this special issue possible. They would also like to express their sincere appreciation to the JACIII editorial board, especially Profs. Kaoru and Fukuda, Editors-in-Chief and Kenta Uchino, Managing Editor, for the opportunity and help they provided for us to put together this special issue.


2005 ◽  
Vol 17 (1) ◽  
pp. 77-88 ◽  
Author(s):  
Yanqun Le ◽  
◽  
Hiroyuki Kojima ◽  
Kazuhiko Matsuda ◽  

This paper proposes a cooperative obstacle-avoidance pushing transportation system using one leader and two follower mobile robots. Its usefulness and effectiveness are illustrated and confirmed numerically as well as experimentally. The cooperative obstacle-avoidance pushing transportation control consists of the obstacle configuration measurement phase by the leader mobile robot, the trajectory-planning phase and the pushing transfer control phase by the two follower mobile robots. In the obstacle configuration measurement phase, the leader mobile robot moves by use of the obstacle-avoidance vehicle control method constructed with six infrared sensors and the pattern recognition algorithm, and three waypoints for the trajectory planning of the follower mobile robots are extracted. In the trajectory-planning phase, the two follower mobile robots receive the three modified waypoints from the leader mobile robot through wireless communication systems, and the obstacle-avoidance trajectories by use of cubic spiral and straight-line segments are generated. Then, in the pushing transfer control phase, a planar object is transported with the pushing and constraining forces resulting from the passive compliance mechanisms attached to the follower mobile robots, and the shock is effectively reduced by the passive compliance mechanisms. From the numerical simulation and experimental results using autonomous mobile robots (MK-01X developed by Fuji Heavy Industries Ltd.), it is confirmed that the planar object can be successfully transported by pushing from the start configuration to the goal in spite of the existence of the obstacle.


Author(s):  
Hiroshi Yamamoto ◽  
Yasufumi Nagai ◽  
Shinichi Kimura ◽  
Hiroshi Takahashi ◽  
Satoko Mizumoto ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document