scholarly journals Numerical simulation of mechanically stimulated bone remodelling

2016 ◽  
Vol 2 (1) ◽  
pp. 643-647 ◽  
Author(s):  
Josephine Mauck ◽  
Jan Wieding ◽  
Daniel Kluess ◽  
Rainer Bader
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Clinical Practice ◽  
Computer Tomography ◽  
Bone Remodelling ◽  
Bone Defects ◽  
Element Analysis ◽  
Great Opportunity ◽  
Choice Of Therapy

AbstractThe numerical simulation of bone remodelling provides a great opportunity to improve the choice of therapy in particular for complex bone defects. Despite this fact, its use in clinical practice is not yet expedient because of several unresolved problems. In this paper a new bone remodelling algorithm based on standard computer tomography datasets and finite element analysis is introduced.

The Numerical Simulation and Finite-Element Analysis of the Motor Vibration Problem Based on the Base Anchor Softening Layer

2013 ◽  
Vol 815 ◽  
pp. 860-867
Author(s):  
Yu Gu ◽  
Shao Xiong Li ◽  
Rui Li ◽  
Qiang Li
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Exciting Force ◽  
Element Analysis ◽  
Comparison Results ◽  
Inherent Frequency ◽  
Motor Model ◽  
Motor Vibration ◽  
Important Significance

Vibration results from situation when the inherent frequency close to the external exciting force during the operation of the motor, so accurate and effective calculation of the natural frequency of the motor has an important significance to damping noise. By numerical simulation model and the ANSYS finite element modal, the inherent frequencies were got of the motor and comparison results verify the effectiveness of the motor model. The effect of the modulus of elasticity of the softening layer between the motor and the ground to the inherent frequency was researched intensively, and puts forward related suggestions.

Dynamic Finite Element Analysis of a Cylindrical Roller Bearing

2011 ◽  
Vol 143-144 ◽  
pp. 437-442
Author(s):  
Bao Hong Tong ◽  
Yin Liu ◽  
Xiao Qian Sun ◽  
Xin Ming Cheng
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Roller Bearing ◽  
Element Analysis ◽  
Dynamic Finite Element ◽  
Dynamic Finite Element Analysis ◽  
Simulation Results ◽  
Cylindrical Roller Bearing ◽  
Cylindrical Roller

A dynamic finite element analysis model for cylindrical roller bearing is developed, and the complex stress distribution and dynamic contacting nature of the bearing are investigated carefully based on ANSYS/LS-DYNA. Numerical simulation results show that the stress would be bigger when the element contacting with the inner or outer ring than at other times, and the biggest stress would appear near the area that roller contacting with the inner ring. Phenomenon of stress concentration on the roller is found to be very obvious during the operating process of the bearing system. The stress distributions of different elements are uneven on the same side surface of roller in its axis direction. Numerical simulation results can give useful references for the design and analysis of rolling bearing.

scholarly journals Mechanical Behavior and Damage of Zinc Coating for Hot Dip Galvanized Steel Sheet DP600

Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 202
Author(s):  
Gui Li ◽  
Xiaoyu Long
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Steel Sheet ◽  
Steel Substrate ◽  
Zinc Coating ◽  
Indentation Test ◽  
Galvanized Steel ◽  
Element Analysis ◽  
The Finite Element Analysis

Advanced high strength galvanized steel sheet has been one of the dominant materials of modern automotive panels because of its outstanding mechanical properties and corrosion resistance. The zinc coating thickness of hot dip galvanized steel sheet is only about 10–20 μm, which is a discarded object on the macro level. However, it is obvious to damage and impact on stamping performance. Therefore, this paper takes zinc coating as the research object and builds its mechanical constitutive model based on a nano-indentation test and dimensional analysis theory. We separated the zinc coating from the galvanized steel substrate and constructed a sandwich material model by introducing a cohesive layer to connect the zinc coating and the steel substrate. We obtained the interface binding energy between the zinc coating and the steel substrate through the nano-scratch test. The accuracy of the model is verified by the finite element analysis of hemispherical parts. We used the five-layers element model with 0 thickness cohesive layer to simulate the zinc coating damage of galvanized steel sheet. The hemispherical part drawing experiment is used to verify the feasibility of the finite element analysis results. The results demonstrate that it is more accurate to consider the finite element numerical simulation of the zinc coating, introducing the cohesive element to simulate damage between the coating and the substrate. Drawing depth, stamping force, and the strain of the numerical simulation are closer to the experimental results.

scholarly journals NUMERICAL SIMULATION ON JOINING OF CERAMICS WITH METAL BY FRICTION WELDING TECHNIQUE

2013 ◽  
Vol 22 ◽  
pp. 190-195 ◽  
Author(s):  
N. RAJESH JESUDOSS HYNES ◽  
P. NAGARAJ ◽  
S. JOSHUA BASIL
Keyword(s):  
Numerical Simulation ◽  
Thermal Analysis ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Friction Welding ◽  
Transient Liquid Phase ◽  
Sheet Thickness ◽  
Welding Process ◽  
Element Analysis

The joining of ceramic and metals can be done by different techniques such as ultrasonic joining, brazing, transient liquid phase diffusion bonding, and friction welding. Friction Welding is a solid state joining process that generates heat through mechanical friction between a moving workpiece and a stationary component. In this article, numerical simulation on thermal analysis of friction welded ceramic/metal joint has been carried out by using Finite Element Analysis (FEA) software. The finite element analysis helps in better understanding of the friction welding process of joining ceramics with metals and it is important to calculate temperature and stress fields during the welding process. Based on the obtained temperature distribution the graphs were plotted between the lengths of the joint corresponding to the temperatures. To increase the wettability, aluminium sheet was used as an interlayer. Hence, numerical simulation of friction welding process is done by varying the interlayer sheet thickness. Transient thermal analysis had been carried out for each cases and temperature distribution was studied. From the simulation studies, it is found that the increase in interlayer thickness reduces the heat affected zone and eventually improves the joint efficiency of alumina/aluminum alloy joints.

Numerical Simulation of Stress and Deformation on Heat Transfer

2011 ◽  
Vol 422 ◽  
pp. 842-845
Author(s):  
Xue Ping Wang ◽  
Ying Zhang ◽  
Pan Li ◽  
Zhen Wei Zhang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Heat Exchange ◽  
Structure Design ◽  
Stress And Strain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Stress And Deformation

This paper primarily simulates the heat exchange part’s stress and strain situation under the load of temperature and gravity and their coupling impact aiming at obtaining the stress and deformation distribution. The authors took advantage of the method of the finite element analysis to study the stress and strain situation. Through the analysis, each part of the transfer’s stress and strain can be calculated. The conclusion of this paper provides the basis for the further enhancement of the machine life and optimization of the structure design.

Sign in / Sign up

Export Citation Format

Share Document