Rheological Properties of a Natural Estuarine Mud

2003 ◽  
Vol 13 (3) ◽  
pp. 142-149 ◽  
Author(s):  
Thierry Aubry ◽  
Tolotrahasiina Razafinimaro ◽  
Ricardo Silva Jacinto ◽  
Philippe Bassoulet
Keyword(s):  
Rheological Properties ◽  
Material Properties ◽  
Mechanical Response ◽  
Oscillatory Shear ◽  
Cohesive Sediments ◽  
Exponential Functions ◽  
Non Linear

Abstract In this paper, the linear and non-linear rheological properties of estuarine cohesive sediments were investigated. The density of the sediments has been determined by pycnometry. Creep and oscillatory shear measurements have been performed in order to determine i) the transitions in mechanical response to creep and oscillatory shear and ii) the material properties of these natural fluids as a function of their density. For all samples tested, four different rheological transitions have been determined and all material properties have been shown to be satisfactorily fitted by exponential functions of the density.

scholarly journals Deformation profiles and microscopic dynamics of complex fluids during oscillatory shear experiments

Soft Matter ◽  
2021 ◽  
Author(s):  
Paolo Edera ◽  
Matteo Brizioli ◽  
Giuliano Zanchetta ◽  
George Petekidis ◽  
Fabio Giavazzi ◽  
...  
Keyword(s):  
Mechanical Response ◽  
Complex Fluids ◽  
Oscillatory Shear ◽  
Shear Tests ◽  
Non Linear ◽  
Microscopic Dynamics

Oscillatory shear tests are widely used in rheology to characterize the linear and non-linear mechanical response of complex fluids, including the yielding transition. There is an increasing urge to acquire...

Steady and dynamic oscillatory shear rheological properties of ketchup–processed cheese mixtures: Effect of temperature and concentration

2011 ◽  
Vol 103 (2) ◽  
pp. 197-210 ◽  
Author(s):  
Mustafa Tahsin Yılmaz ◽  
Safa Karaman ◽  
Hasan Cankurt ◽  
Ahmed Kayacier ◽  
Osman Sagdic
Keyword(s):  
Rheological Properties ◽  
Oscillatory Shear ◽  
Effect Of Temperature ◽  
Processed Cheese

scholarly journals Numerical Characterization of Cohesive and Non-Cohesive ‘Sediments’ under Different Consolidation States Using 3D DEM Triaxial Experiments

Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1252
Author(s):  
Hadar Elyashiv ◽  
Revital Bookman ◽  
Lennart Siemann ◽  
Uri ten Brink ◽  
Katrin Huhn
Keyword(s):  
Mechanical Response ◽  
Burial Depth ◽  
Cohesive Sediments ◽  
Third Order ◽  
First Order ◽  
Numerical Characterization ◽  
Response To Stress ◽  
Bond Strengths ◽  
Individual Bond

The Discrete Element Method has been widely used to simulate geo-materials due to time and scale limitations met in the field and laboratories. While cohesionless geo-materials were the focus of many previous studies, the deformation of cohesive geo-materials in 3D remained poorly characterized. Here, we aimed to generate a range of numerical ‘sediments’, assess their mechanical response to stress and compare their response with laboratory tests, focusing on differences between the micro- and macro-material properties. We simulated two endmembers—clay (cohesive) and sand (cohesionless). The materials were tested in a 3D triaxial numerical setup, under different simulated burial stresses and consolidation states. Variations in particle contact or individual bond strengths generate first order influence on the stress–strain response, i.e., a different deformation style of the numerical sand or clay. Increased burial depth generates a second order influence, elevating peak shear strength. Loose and dense consolidation states generate a third order influence of the endmember level. The results replicate a range of sediment compositions, empirical behaviors and conditions. We propose a procedure to characterize sediments numerically. The numerical ‘sediments’ can be applied to simulate processes in sediments exhibiting variations in strength due to post-seismic consolidation, bioturbation or variations in sedimentation rates.

Dependence of Mechanical Behavior of the Murine Tail Disc on Regional Material Properties: A Parametric Finite Element Study

2005 ◽  
Vol 127 (7) ◽  
pp. 1158-1167 ◽  
Author(s):  
Adam H. Hsieh ◽  
Diane R. Wagner ◽  
Louis Y. Cheng ◽  
Jeffrey C. Lotz
Keyword(s):  
Finite Element ◽  
Mechanical Behavior ◽  
Nucleus Pulposus ◽  
Material Properties ◽  
Mechanical Response ◽  
Swelling Pressure ◽  
Transient Behavior ◽  
Sensitivity Analyses ◽  
Intact Mouse

In vivo rodent tail models are becoming more widely used for exploring the role of mechanical loading on the initiation and progression of intervertebral disc degeneration. Historically, finite element models (FEMs) have been useful for predicting disc mechanics in humans. However, differences in geometry and tissue properties may limit the predictive utility of these models for rodent discs. Clearly, models that are specific for rodent tail discs and accurately simulate the disc’s transient mechanical behavior would serve as important tools for clarifying disc mechanics in these animal models. An FEM was developed based on the structure, geometry, and scale of the mouse tail disc. Importantly, two sources of time-dependent mechanical behavior were incorporated: viscoelasticity of the matrix, and fluid permeation. In addition, a novel strain-dependent swelling pressure was implemented through the introduction of a dilatational stress in nuclear elements. The model was then validated against data from quasi-static tension-compression and compressive creep experiments performed previously using mouse tail discs. Finally, sensitivity analyses were performed in which material parameters of each disc subregion were individually varied. During disc compression, matrix consolidation was observed to occur preferentially at the periphery of the nucleus pulposus. Sensitivity analyses revealed that disc mechanics was greatly influenced by changes in nucleus pulposus material properties, but rather insensitive to variations in any of the endplate properties. Moreover, three key features of the model—nuclear swelling pressure, lamellar collagen viscoelasticity, and interstitial fluid permeation—were found to be critical for accurate simulation of disc mechanics. In particular, collagen viscoelasticity dominated the transient behavior of the disc during the initial 2200s of creep loading, while fluid permeation governed disc deformation thereafter. The FEM developed in this study exhibited excellent agreement with transient creep behavior of intact mouse tail motion segments. Notably, the model was able to produce spatial variations in nucleus pulposus matrix consolidation that are consistent with previous observations in nuclear cell morphology made in mouse discs using confocal microscopy. Results of this study emphasize the need for including nucleus swelling pressure, collagen viscoelasticity, and fluid permeation when simulating transient changes in matrix and fluid stress/strain. Sensitivity analyses suggest that further characterization of nucleus pulposus material properties should be pursued, due to its significance in steady-state and transient disc mechanical response.

Axisymmetric Thermal Stresses of a Piezoelectric Poroelastic Circular Solid Plate

2021 ◽  
Vol 143 (5) ◽  
Author(s):  
Ali Abjadi ◽  
Mohsen Jabbari ◽  
Ahmad Reza Khorshidvand
Keyword(s):  
Cadmium Selenide ◽  
Material Properties ◽  
Thermal Stresses ◽  
Separation Of Variables ◽  
Electrical Potential ◽  
Material Symmetry ◽  
Exponential Functions ◽  
Cylindrical Coordinates ◽  
Solid Plate ◽  
Electrical Loads

Abstract This paper presents the steady-state thermoelasticity solution for a circular solid plate is made of an undrained porous piezoelectric hexagonal material symmetry of class 6 mm. The porosities of the plate vary through the thickness; thus, material properties, except Poisson's ratio, are assumed as exponential functions of axial variable z in cylindrical coordinates. Having axisymmetric general form, external thermal and electrical loads are acted on the plate and the piezothermoelastic behavior of the plate is investigated. Using a full analytical method based on Bessel Fourier's series and separation of variables, the governing partial differential equations are derived. A formulation is given for the displacements, electric potential, thermal stresses, and electric displacements resulting from prescribed the general form of thermal, mechanical, and electric boundary conditions. Finally, the application of the derived formulas is illustrated by an example for a cadmium selenide solid, the results of which are presented graphically. Also, the effects of material property indexes, the porosity, and Skempton coefficients are discussed on the displacements, thermal stresses, electrical potential function, and electric displacements.

Properties of Mouse Cutaneous Rapidly Adapting Afferents: Relationship to Skin Viscoelasticity

2004 ◽  
Vol 92 (2) ◽  
pp. 1236-1240 ◽  
Author(s):  
P. Grigg ◽  
D. R. Robichaud ◽  
Z. Del Prete
Keyword(s):  
Viscoelastic Material ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Mechanical Response ◽  
Loss Modulus ◽  
Multiple Logistic Regression Analysis ◽  
Rate Of Change ◽  
Volterra Model ◽  
Lower Sensitivity ◽  
Dynamic Stimuli

When skin is stretched, stimuli experienced by a cutaneous mechanoreceptor neuron are transmitted to the nerve ending through the skin. In these experiments, we tested the hypothesis that the viscoelastic response of the skin influences the dynamic response of cutaneous rapidly adapting (RA) neurons. Cutaneous RA afferent neurons were recorded in 3 species of mice (Tsk, Pallid, and C57BL6) whose skin has different viscoelastic properties. Isolated samples of skin and nerve were stimulated mechanically with a dynamic stretch stimulus, which followed a pseudo Gaussian waveform with a bandwidth of 0–60 Hz. The mechanical response of the skin was measured as were responses of single RA cutaneous mechanoreceptor neurons. For each neuron, the strength of association between spike responses and the dynamic and static components of stimuli were determined with multiple logistic regression analysis. The viscoelastic material properties of each skin sample were determined indirectly, by creating a nonlinear (Wiener–Volterra) model of the stress–strain relationship, and using the model to predict the complex compliance (i.e., the viscoelastic material properties). The dynamic sensitivity of RA mechanoreceptor neurons in mouse hairy skin was weakly related to the viscoelastic properties of the skin. Loss modulus and phase angle were lower (indicating a decreased viscous component of response) in Tsk and Pallid than in C57BL6 mice. However, RA mechanoreceptor neurons in Tsk and Pallid skin did not differ from those in C57 skin with regard to their sensitivity to the rate of change of stress or to the rate of change of incremental strain energy. They did have a decreased sensitivity to the rate of change of tensile strain. Thus the skin samples with lower dynamic mechanical response contained neurons with a somewhat lower sensitivity to dynamic stimuli.

Design with Nonhomogeneous Materials—Part I: Pure Bending of Prismatic Bars

1987 ◽  
Vol 109 (1) ◽  
pp. 82-86 ◽  
Author(s):  
V. K. Stokes
Keyword(s):  
Tensile Test ◽  
Material Properties ◽  
Elastic Moduli ◽  
Mechanical Response ◽  
Mechanical Design ◽  
Beam Theory ◽  
Pure Bending ◽  
Strongly Coupled ◽  
Point To Point ◽  
Nonhomogeneous Materials

Because material properties vary from point to point in nonhomogeneous materials, there is some question as to what “properties” are measured in tests such as the tensile test, and how such “properties” can be used in the mechanical design process. In this paper, the mechanical response of nonhomogeneous prismatic bars in pure bending has been shown to depend on parameters that are strongly coupled combinations of geometry and material properties. The purely geometry based inertia tensor in homogeneous beam theory is replaced in the nonhomogeneous case by the rigidity tensor, which combines geometry and material properties. Interpretations for the average elastic moduli, which would be determined by tests on nonhomogeneous materials, have been explored. Also discussed is the usefulness of such average moduli for predicting the mechanical response of nonhomogeneous bars.

The mechanical basis of Drosophila audition

2002 ◽  
Vol 205 (9) ◽  
pp. 1199-1208 ◽  
Author(s):  
Martin C. Göpfert ◽  
Daniel Robert
Keyword(s):  
Mechanical Response ◽  
Dynamic Range ◽  
Near Field ◽  
Sense Organ ◽  
Field Measurements ◽  
Longitudinal Axis ◽  
Acoustic Energy ◽  
Linear Effect ◽  
Response Characteristics ◽  
Non Linear

SUMMARY In Drosophila melanogaster, antennal hearing organs mediate the detection of conspecific songs. Combining laser Doppler vibrometry, acoustic near-field measurements and anatomical analysis, we have investigated the first steps in Drosophila audition, i.e. the conversion of acoustic energy into mechanical vibrations and the subsequent transmission of vibrations to the auditory receptors in the base of the antenna. Examination of the mechanical responses of the antennal structures established that the distal antennal parts (the funiculus and the arista) together constitute a mechanical entity, the sound receiver. Unconventionally, this receiver is asymmetric, resulting in an unusual, rotatory pattern of vibration; in the presence of sound, the arista and the funiculus together rotate about the longitudinal axis of the latter. According to the mechanical response characteristics, the antennal receiver represents a moderately damped simple harmonic oscillator. The receiver's resonance frequency increases continuously with the stimulus intensity, demonstrating the presence of a non-linear stiffness that may be introduced by the auditory sense organ. This surprising,non-linear effect is relevant for close-range acoustic communication in Drosophila; by improving antennal sensitivity at low song intensities and reducing sensitivity when intensity is high, it brings about dynamic range compression in the fly's auditory system.

Sign in / Sign up

Export Citation Format

Share Document