Modelling of liquid steel flow with free surface

2004 ◽  
Vol 4 (1) ◽  
pp. 12 ◽  
Author(s):  
Marcela B. Goldschmit ◽  
Sergio P. Ferro ◽  
A. Heriberto Coppola Owen
Keyword(s):  
Free Surface ◽  
Liquid Steel ◽  
Steel Flow

scholarly journals Evolution of the Numerical Model Describing the Distribution of Non-Metallic Inclusions in the Tundish

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2229
Author(s):  
Tomasz Merder ◽  
Jacek Pieprzyca ◽  
Marek Warzecha ◽  
Piotr Warzecha ◽  
Artur Hutny
Keyword(s):  
Numerical Model ◽  
Liquid Steel ◽  
Nonmetallic Inclusions ◽  
Steel Production ◽  
Cfd Modeling ◽  
Water Model ◽  
Working Space ◽  
Production Stages ◽  
Steel Flow ◽  
Flow Controllers

Continuous casting is one of the steel production stages, during which the improvement in the metallurgical purity of steel can be additionally affected by removing nonmetallic inclusions (NMIs). This can be achieved by means of various types of flow controllers, installed in the working space of the tundish. The change in the steel flow structure, caused by those flow controllers, should lead to an intensification of NMIs removal from the liquid metal to the slag. Therefore, it is crucial to understand the behavior of nonmetallic inclusions during the flow of liquid steel through the tundish, and particularly during their distribution. The presented paper reports the results of the modeling studies of NMI distribution in liquid steel, flowing through the tundish. CFD modeling methods—using different models and computation variants—were employed in the study. The obtained CFD results were compared with the results of laboratory tests (using a tundish water model). The results of the performed investigations allow us to compare both methods of modeling; the investigated phenomena were microparticle distribution and mass microparticle concentration in the model fluid. The validation of the CFD results verified the analyzed computation variants. The aim of the research was to determine which numerical model is the best for describing the studied phenomenon. This will be used as the first phase of a larger research program which will provide for a comprehensive study of the distribution of NMIs flowing through tundish steel.

scholarly journals New Insight on Liquid Steel Microalloying by Pulse-Step Method in Two-Strand Slab Tundish by Numerical Simulations

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 448
Author(s):  
Adam Cwudziński
Keyword(s):  
Liquid Steel ◽  
Mixing Time ◽  
Casting Process ◽  
Step Method ◽  
Flow Control Devices ◽  
Alloy Addition ◽  
Interesting Approach ◽  
Control Devices ◽  
Steel Flow ◽  
Alloy Concentration

Developing a technology for introducing alloy addition to liquid steel during the course of continuous casting process seems to be an interesting approach to enhancing the steelmaking process, especially as the effective introduction of micro-additives or non-metallic inclusion modifiers to the liquid steel is the key to the production of the highest-quality steel. This paper presents the results of investigation describing the process of liquid steel chemical homogenisation in the two-strand slab tundish. The alloy was fed to liquid steel by pulse-step method. Five tundish equipment variants with different flow control devices and alloy addition feeding positions were considered. The paper includes fields of liquid steel flow, alloy concentration vs. time curves, dimensionless mixing time, minimum time values and alloy concentration deviations at tundish outlets. The results pointed much more effectively with liquid steel mixing nickel than aluminium. For aluminium obtaining a 95% chemical homogenisation level requires three-fold more time. Moreover, it is definitely beneficial for chemical homogenisation to initiate the alloying process simultaneously in two sites. This procedure generates, among others, the least alloy deviation of concentration at tundish outlets.

New idea of suppressing free surface vortex during tapping liquid steel from converter

2016 ◽  
Vol 22 (1) ◽  
pp. 136-142 ◽  
Author(s):  
Seung-Jin Lee ◽  
Sang-Joon Kim ◽  
Hae-Geon Lee
Keyword(s):  
Free Surface ◽  
Liquid Steel ◽  
Free Surface Vortex ◽  
Surface Vortex

scholarly journals CURRENT PROBLEMS AND PERSPECTIVES OF COMPUTER SIMULATION OF CONTINUOUS STEEL CASTING

2019 ◽  
Vol 62 (5) ◽  
pp. 374-380
Author(s):  
A. A. Shipel’nikov ◽  
A. N. Rogotovskii ◽  
N. A. Bobyleva ◽  
S. V. Skakov
Keyword(s):  
Liquid Steel ◽  
Steel Casting ◽  
Computer Experiments ◽  
Continuous Steel Casting ◽  
Continuous Steel ◽  
Effective Control ◽  
Melt Flow ◽  
Submerged Nozzle ◽  
Deterministic Dynamic ◽  
Steel Flow

Nowadays we can see increase in using of engineering analysis systems in the field of continuous steel casting simulation due to their high accuracy and convergence with industrial experiments results. Such powerful systems as «ANSYS» and «ProCast» allows solving gas-, hydrodynamic and thermal problems, the parallel interaction of which constitutes the essence of most metallurgical processes. Group of authors from the LSTU Chair “Metallurgical technology” have successfully carried out computer experiments in tundish and continuous casting mold processes simulation. The experiments were aimed at first, on studying of further improving in liquid steel flow modifiers (partitions, turbo-stops, thresholds) design, at second, on influence of argon blowing regime on liquid steel flow parameters in the 50-ton tundish workspace, and, at third, on influence of submerged nozzles design on the liquid steel flow in crystallizer, assuming deterministic-dynamic operation mode. The results of calculations are velocity fields of liquid steel flow and flow temperatures fields in tundish and crystallizer, as well as temperature fields in the tundish refractory lining. An equation of primary flow average velocity change on exit from submerged nozzle was also formulated. These preliminary results allow us to assess the velocity changes and direction of the melt flow and formation of volumes with different melt temperatures when using flow modifiers in the ladle, including using of “argon curtain” in the casting chamber. Obtained data on melt flow motion and on location of erosion spots in crystallizing «crust», also on the presence of temperature gradient zones in various regions of crystallizer workspace may be useful to practice engineers engaged in choice of crystallizer submerged nozzle design. Effective control of melt flow in tundish and in crystallizer allows significant improvements in continuous cast slabs and rolled products quality in context of reducing metal products rejection due to defects associated with slag or nonmetallic inclusions presence and due to cracks formed as the result of insufficient thickness of crystallized «crust».

Sign in / Sign up

Export Citation Format

Share Document