Small-strain shear modulus and damping ratio determination by bender element

2005 ◽  
Author(s):  
Kai Fung Lo
Keyword(s):  
Shear Modulus ◽  
Damping Ratio ◽  
Small Strain ◽  
Bender Element ◽  
Small Strain Shear Modulus ◽  
Ratio Determination

Bender Element Measurement for Small-Strain Shear Modulus of Compacted Loess

2021 ◽  
Vol 21 (5) ◽  
pp. 04021063
Author(s):  
Fangtong Wang ◽  
Dianqing Li ◽  
Wenqi Du ◽  
Chia Zarei ◽  
Yong Liu
Keyword(s):  
Shear Modulus ◽  
Small Strain ◽  
Bender Element ◽  
Small Strain Shear Modulus ◽  
Compacted Loess

Measurement of small-strain shear modulus Gmax of dry and saturated sands by bender element, resonant column, and torsional shear tests

2008 ◽  
Vol 45 (10) ◽  
pp. 1426-1438 ◽  
Author(s):  
Jun-Ung Youn ◽  
Yun-Wook Choo ◽  
Dong-Soo Kim
Keyword(s):  
Shear Modulus ◽  
Shear Wave ◽  
Shear Wave Velocity ◽  
Small Strain ◽  
Resonant Column ◽  
Test Results ◽  
Bender Element ◽  
Small Strain Shear Modulus ◽  
Torsional Shear ◽  
Saturated Sands

The bender element method is an experimental technique used to determine the small-strain shear modulus (Gmax) of a soil by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure the Gmax of wet and dry soils in various laboratory apparatuses. However, certain aspects of the bender element method have yet to be clearly specified because of uncertainties in determining travel time. In this paper, the bender element (BE), resonant column (RC), and torsional shear (TS) tests were performed on the same specimens using the modified Stokoe-type RC and TS testing equipment. Two clean sands, Toyoura and silica sands, were tested at various densities and mean effective stresses under dry and saturated conditions. Based on the test results, methods of determining travel time in BE tests were evaluated by comparing the results of RC, TS, and BE tests. Also, methods to evaluate Gmax of saturated sands from the shear-wave velocity (Vs) obtained by RC and BE tests were investigated by comparing the three sets of test results. Biot’s theory on frequency dependence of shear-wave velocity was adopted to consider dispersion of a shear wave in saturated conditions. The results of this study suggest that the total mass density, which is commonly used to convert Gmax from the measured Vs in saturated soils, should not be used to convert Vs to Gmax when the frequency of excitation is 10% greater than the characteristic frequency (fc) of the soil.

scholarly journals A semi-empirical relationship for the small-strain shear modulus of soft clays

2019 ◽  
Vol 92 ◽  
pp. 04005
Author(s):  
Vashish Taukoor ◽  
Cassandra J. Rutherford ◽  
Scott M. Olson
Keyword(s):  
Shear Modulus ◽  
Effective Stress ◽  
Void Ratio ◽  
Empirical Relationship ◽  
Small Strain ◽  
High Plasticity ◽  
Bender Element ◽  
Stress History ◽  
Small Strain Shear Modulus ◽  
Semi Empirical

The small-strain shear modulus (Gmax) is a soil property that has many practical applications. The authors compiled a database of Gmax measurements for 40 normally consolidated to slightly overconsolidated low to high plasticity clays. Using these data, the authors propose a semi-empirical relationship between Gmax, effective stress (σ'v or σ'c), preconsolidation stress (σ'p) and in-situ void ratio (e0) for four ranges of plasticity index (Ip): Ip < 30%, 30% ≤ Ip < 50%, 50% ≤ Ip < 80% and 80% ≤ Ip < 120%. With results from bender element tests on a Gulf of Mexico clay subjected to multiple load-unload consolidation loops, the authors were able to validate the proposed relationships for 30% ≤ Ip < 50% and 50% ≤ Ip < 80%. The proposed relationship for 30% ≤ Ip < 50% and 50% ≤ Ip < 80% captures changes in laboratory Gmax resulting from variations in effective stress (σ'c), maximum past stress (σ'v,max), and void ratio. The proposed relationships are a simple and efficient tool that can provide independent insight on Gmax if the stress history of a clay is known, or on stress history if Gmax is known.

Small-Strain Shear Modulus and Damping Ratio of Sand-Rubber and Gravel-Rubber Mixtures

2011 ◽  
Vol 30 (2) ◽  
pp. 363-382 ◽  
Author(s):  
Anastasios Anastasiadis ◽  
Kostas Senetakis ◽  
Kyriazis Pitilakis
Keyword(s):  
Shear Modulus ◽  
Damping Ratio ◽  
Small Strain ◽  
Small Strain Shear Modulus
Sign in / Sign up

Export Citation Format

Share Document