scholarly journals EXPERIMENTAL DETERMINATION OF THE HOLE AXIS DEFLECTION WHEN WORKING WITH A COUNTERSINK WITH CARBIDE BLADES

2020 ◽  
Vol 20 (1) ◽  
pp. 55-62
Author(s):  
I. P. Deryabin ◽  
◽  
A. S. Tokarev ◽  
B. A. Lopatin ◽  
◽  
...  
Keyword(s):  
Mathematical Model ◽  
Cutting Forces ◽  
Full Scale ◽  
Shape Accuracy ◽  
Full Scale Experiment ◽  
Lateral Displacements ◽  
Scale Experiment ◽  
The Mathematical Model ◽  
Hole Axis ◽  
Theoretical Results

This article discusses the developed mathematicalmodel that takes intoaccount the errors of sharpening and assembling the cutting blades of a countersink tool with carbide blades. This allows you to determine the actual area of the cut sections of the allowance for each blade and calculate the cutting forces acting on them. The resultant cutting forces leads to lateral displacements of the axis of the tool during machining of the hole. The mathematical model makes it possible to determine the errors of processing holes (axis retraction, split and shape accuracy) with a countersink with a carbideblades. To check the adequacy of the mathematical model, fullscale experiments were performed on blanks madeof various materials. The method of conducting a full-scale experiment was developed. Recommended cutting modes and a countersink with three blades are selected. Processing was performed at the MM800 Fanuc processing center. Using modern automation tools – the Renishaw system and additive technologies using the Range Vision Spectrum 3D scanner, the drift of the hole axis was measured after processing with a vertical drill with carbide blades. This device allows you to get the desired result in a very short time. A compact sensor was used to measure the deflection of the hole axis, allowing for very accurate results. Substituting the part processing data into the mathematical model, the calculated values (theoretical) of the hole axis withdrawal during processing for the prototypes are obtained. The theoretical results and the results of the field experiment are compared. Comparing the obtained theoretical results – the results of a mathematical model, and the results of a full-scale experiment, it was concluded that the developed mathematical model is adequate and can be used in production by technologists in the development and computer debugging of technological processes.

Methods of improving the coordinates determining accuracy using inertial geodetic systems

2021 ◽  
Vol 976 (10) ◽  
pp. 13-20
Author(s):  
I.V. Chernov ◽  
A.V. Astapovich ◽  
A.V. Suvorov
Keyword(s):  
Mathematical Model ◽  
Full Scale ◽  
Navigation Systems ◽  
Radio Navigation ◽  
Full Scale Experiment ◽  
Object Movement ◽  
Ground Object ◽  
Simulation Results ◽  
Scale Experiment ◽  
Inertial Systems

The authors consider the principle of geodetic definitions using inertial systems in the absence of signals from satellite radio navigation systems and insufficient density of the initial geodetic base. A technique of improving the coordinates’ accuracy determining using inertial geodetic systems is proposed. Compensation of these systems’ errors is performed through joint equalization of data received from the inertial system, gyrotheodolite and rangefinder. In order to test the methodology, a mathematical model of the ground object movement with an inertial geodetic system was compiled. The simulation results confirm the suitability of the developed methodology. A full-scale experiment was conducted to test the efficiency of the technique. Its results are consistent with those of the simulation. The analysis of the data obtained enables concluding that the developed technique provides an increase in the accuracy of determining coordinates using inertial geodetic systems in the absence or distortion of signals from satellite radio navigation systems and insufficient density of the initial geodetic base. That is why it can be used in operational geodetic training under conditions of autonomy.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

scholarly journals Investigations of electrophysical monitoring in a full-scale experiment to clean soil contaminated with oil

2020 ◽  
Vol 177 ◽  
pp. 04003
Author(s):  
Sergey Prostov ◽  
Evgeniy Shabanov
Keyword(s):  
High Efficiency ◽  
Oil Pollution ◽  
Soil Mass ◽  
Full Scale ◽  
Used Oil ◽  
Complex Processes ◽  
Full Scale Experiment ◽  
Scale Experiment ◽  
Processing Zone ◽  
Conductive Properties

This article presents the main results of the study of electrophysical processes occurring in the zone of electrical processing during the cleaning of soils from oil pollution. The main conclusions are formulated about the processes occurring in the electric processing zone by changing the relative electrical resistance of the soil, which was measured using microprobe sensors. A comparative analysis of the results of a laboratory experiment on the electrochemical cleaning of contaminated soil in a tank is carried out with the results of a full-scale experiment conducted on a plot of a soil mass in real conditions, but artificially contaminated with oil products (gasoline, used oil. Using single measurements of electrical resistivity by microprobe sensors, the spread of the pollutant in the soil was clarified , the relationship between the physical properties of the array and its electrical wire is established conductive properties. Confirmed high efficiency of this type of control in the study of complex processes occurring in the contaminated ground array.

Water balance comparison between a dry and a wet landfill — a full-scale experiment

2001 ◽  
Vol 251 (1-2) ◽  
pp. 29-48 ◽  
Author(s):  
S.T.S. Yuen ◽  
Q.J. Wang ◽  
J.R. Styles ◽  
T.A. McMahon
Keyword(s):  
Water Balance ◽  
Full Scale ◽  
Full Scale Experiment ◽  
Scale Experiment

A synthesis of the first full-scale experiment in Central America

2019 ◽  
pp. 1-10
Author(s):  
Tania Ávila-Esquivel ◽  
José Pablo Aguiar-Moya ◽  
Edgar Camacho-Garita ◽  
Luis Loría-Salazar
Keyword(s):  
Central America ◽  
Full Scale ◽  
Full Scale Experiment ◽  
Scale Experiment
Sign in / Sign up

Export Citation Format

Share Document