Integral Sodium Chloride Effect on Strength, Water Vapor Transmission, And Efflorescence of Concrete

10.14359/8006 ◽  
1961 ◽  
Vol 58 (12) ◽  
Keyword(s):  
Water Vapor ◽  
Sodium Chloride ◽  
Water Vapor Transmission ◽  
Chloride Effect

MATHEMATICAL CORRELATION OF TEST METHODS FOR MEASURING WATER-VAPOR TRANSMISSION THROUGH FABRICS

2015 ◽  
Vol 18 (3) ◽  
pp. 245-255
Author(s):  
Teodor-Cezar Codau ◽  
Elena Onofrei ◽  
Stojanka Petrusic ◽  
Gauthier Bedek ◽  
Daniel Dupont ◽  
...  
Keyword(s):  
Water Vapor ◽  
Test Methods ◽  
Mathematical Correlation ◽  
Water Vapor Transmission

scholarly journals A porous PDMS pulsewave sensor with haircell structures for water vapor transmission rate and signal-to-noise ratio enhancement

2021 ◽  
Author(s):  
Minho Seok ◽  
Sunghyun Yoon ◽  
Mookyum Kim ◽  
Young-Ho Cho
Keyword(s):  
Water Vapor ◽  
Transmission Rate ◽  
Signal To Noise Ratio ◽  
Water Vapor Transmission Rate ◽  
Signal To Noise ◽  
Water Vapor Transmission ◽  
Noise Ratio

We present a porous polydimethylsiloxane (PDMS) pulsewave sensor with haircell structures that improves both water vapor transmission rate (WVTR) and signal-to-noise ratio (SNR).

scholarly journals Water vapor transmission properties of acrylic organic coatings

2020 ◽  
Author(s):  
Réka Lilla Kovács ◽  
Lajos Daróczi ◽  
Péter Barkóczy ◽  
Eszter Baradács ◽  
Eszter Bakonyi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Transmission Rate ◽  
Performance Testing ◽  
Preexponential Factor ◽  
Diffusion Activation Energy ◽  
Vapor Permeability ◽  
Coating Materials ◽  
Comparative Performance ◽  
Water Vapor Transmission ◽  
Arrhenius Function

AbstractIn this work, we evaluate the water vapor transmission rate (WVTR), the permeability (P), solubility (S), and diffusion (D) coefficients of Paraloid B44, Paraloid B72, and Incralac coatings in the temperature range of 5–35°C. The Arrhenius function—diffusion activation energy and preexponential factor—has also been determined from the data: $$D_{B44} = 35.2\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} \exp \left( { - 25\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D B 44 = 35.2 cm 2 s - 1 exp - 25 kJ mol - 1 / RT ; $$D_{B72} = 9.5\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} \exp \left( { - 23\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D B 72 = 9.5 cm 2 s - 1 exp - 23 kJ mol - 1 / RT ; $$D_{\text{Incralac}} = 622.8\;{\text{cm}}^{2} \;{\text{s}}^{ - 1} { \exp }\left( { - 28\;{\text{kJ mol}}^{ - 1} /{\text{RT}}} \right)$$ D Incralac = 622.8 cm 2 s - 1 exp - 28 kJ mol - 1 / RT . These resins are important coating materials, for example, for conservators to protect metallic artifacts, such as statues, against corrosion. Despite Paraloid B44 and B72 resins being considered as reference materials in conservation practice, that is, new coating materials (either water vapor retarders or transmitters) are often compared to them, there are no comprehensive data for the quantities describing the vapor permeability (P, S, D) of these materials. The measurements are based on the ISO cup-method using substrate/coating composite samples. The strength of this technique is that it can also be used when the coating is non-self-supporting; nevertheless, P, S, and D can be deduced for the coating layer itself, and it seems to be a standardizable procedure for comparative performance testing of coating materials. Paraloid B72 layers exhibited higher WVTRs—from 39 to 315 g m−2 day−1 as the temperature increased from 5 to 35°C—compared to Paraloid B44 and Incralac coatings—from 17 to 190 g m−2 day−1, respectively. The transmission rate parameters were also compared to the results of corrosion tests. Incralac was the most effective corrosion inhibitor, and the performance of the B44 was better than the B72, which is in good agreement with the transmission rate tests.

scholarly journals A novel tandem differential mobility analyzer with organic vapor treatment of aerosol particles

2001 ◽  
Vol 1 (1) ◽  
pp. 51-60 ◽  
Author(s):  
J. Joutsensaari ◽  
P. Vaattovaara ◽  
M. Vesterinen ◽  
K. Hämeri ◽  
A. Laaksonen
Keyword(s):  
Water Vapor ◽  
Sodium Chloride ◽  
Citric Acid ◽  
Ammonium Sulfate ◽  
Adipic Acid ◽  
Aerosol Particles ◽  
Ethanol Vapor ◽  
Differential Mobility Analyzer ◽  
Differential Mobility ◽  
Organic Vapor

Abstract. A novel method to characterize the organic composition of aerosol particles has been developed. The method is based on organic vapor interaction with aerosol particles and it has been named an Organic Tandem Differential Mobility Analyzer (OTDMA). The OTDMA method has been tested for inorganic (sodium chloride and ammonium sulfate) and organic (citric acid and adipic acid) particles. Growth curves of the particles have been measured in ethanol vapor and as a comparison in water vapor as a function of saturation ratio. Measurements in water vapor show that sodium chloride and ammonium sulfate as well as citric acid particles grow at water saturation ratios (S) of 0.8 and above, whereas adipic acid particles do not grow at S <  0.96. For sodium chloride and ammonium sulfate particles, a deliquescence point is observed at S = 0.75 and S = 0.79, respectively. Citric acid particles grow monotonously with increasing saturation ratios already at low saturation ratios and no clear deliquescence point is found. For sodium chloride and ammonium sulfate particles, no growth can be seen in ethanol vapor at saturation ratios below 0.93. In contrast, for adipic acid particles, the deliquescence takes place at around S = 0.95 in the ethanol vapor. The recrystallization of adipic acid takes place at S < 0.4. Citric acid particles grow in ethanol vapor similarly as in water vapor; the particles grow monotonously with increasing saturation ratios and no stepwise deliquescence is observed. The results show that the working principles of the OTDMA are operational for single-component aerosols. Furthermore, the results indicate that the OTDMA method may prove useful in determining whether aerosol particles contain organic substances, especially if the OTDMA is operated in parallel with a hygroscopicity TDMA, as the growth of many substances is different in ethanol and water vapors.

Effect of chloride on renal blood flow in angiotensin II induced hypertension

1991 ◽  
Vol 69 (4) ◽  
pp. 507-511 ◽  
Author(s):  
John C. Passmore ◽  
Agnes E. Jimenez
Keyword(s):  
Blood Pressure ◽  
Blood Flow ◽  
Sodium Chloride ◽  
Angiotensin Ii ◽  
Renal Blood Flow ◽  
Dietary Sodium ◽  
Maximum Increase ◽  
High Sodium ◽  
Low Sodium ◽  
Chloride Effect

The effect of selective dietary sodium and (or) chloride loading on blood pressure and renal blood flow (RBF) in the rat angiotensin II (AII) model of hypertension was determined. AII (200 ng/min) or saline was infused intraperitoneally. Diets were provided with either high or low concentrations of sodium, chloride or both ions for 22 days. The blood pressure of saline-treated animals was not increased by the high sodium chloride diet. Animals on a high sodium, high chloride diet had a significantly greater increase of blood pressure at 8, 15, 18, and 22 days of AII infusion compared with AII-treated animals on a low sodium, low chloride diet (p < 0.05). Selective dietary loading of either high sodium or chloride in AII-treated rats produced no greater elevation of blood pressure than AII with the low sodium, low chloride diet. Selective high dietary chloride was associated with a lower RBF in AII- and vehicle-treated rats compared with low dietary chloride. The chloride effect on RBF was greater in AII-treated animals. In conclusion, both sodium and chloride are necessary to produce the maximum increase of blood pressure in AII animals. AII enhances the decreased RBF induced by dietary chloride.Key words: angiotensin II, sodium chloride, blood pressure.

Effects of Oxygen and Water Vapor Transmission Rates of Polymeric Pouches on Oxidative Changes of Microwave-Sterilized Mashed Potato

2015 ◽  
Vol 9 (2) ◽  
pp. 341-351 ◽  
Author(s):  
Hongchao Zhang ◽  
Kanishka Bhunia ◽  
Pengqun Kuang ◽  
Juming Tang ◽  
Barbara Rasco ◽  
...  
Keyword(s):  
Water Vapor ◽  
Transmission Rates ◽  
Water Vapor Transmission

scholarly journals Preparing of Cornstarch (Zea mays) Bioplastic Using ZnO Metal

2018 ◽  
Vol 1 (1) ◽  
pp. 23
Author(s):  
Nurwani Hayati ◽  
Lazulva Lazulva
Keyword(s):  
Tensile Strength ◽  
Zea Mays ◽  
Water Vapor ◽  
Water Content ◽  
Transmission Rate ◽  
Test Results ◽  
Mixing Process ◽  
Water Vapor Transmission Rate ◽  
Water Vapour Transmission Rate ◽  
Water Vapor Transmission

The manufacture of the bioplastic was done through the mixing process using an aquades solvent with a ratio massa 10 gram and 7 gram cornstarch, 150 mL aquades, 2 Ml glycerol and 0,5 gram ZnO. This study aim to find out physical characteristies (water vapour transmission rate, water content, thickness,biodegradation) and mechanical charateristics (tensile strength, elongasi, modulus young) are made of cornstrach (Zea mays) using ZnO metal. From the test results tensile strength was 2.744-4.018 Mpa, percentage of elongation was 28.4632.383%, modulus young’s was 8.9031026535-14.08617709Mpa, thickness was 0.16-0.29mm, water vapor transmission rate was 0.4329-1.52525g/m2.24 hours, water content was 13.5-14.5%, and biodegradation was 3.7798-7.0346% and 455-809 days.

The Effect of Lauric Acid Addition on Characteristics of Biocomposite Edible Film

2021 ◽  
Vol 1044 ◽  
pp. 191-200
Author(s):  
Emma Rochima ◽  
Nur Silmi Nafisah ◽  
Rosidah ◽  
Iis Rostini ◽  
Subaryono
Keyword(s):  
Water Vapor ◽  
Moisture Content ◽  
Lauric Acid ◽  
Transmission Rate ◽  
Total Solid ◽  
Edible Film ◽  
Film Material ◽  
Percent Elongation ◽  
Acid Addition ◽  
Water Vapor Transmission

The biocomposites were prepared from chitosan, carragenan and modified tapioca with lauric acid addition. The biocomposite were used as edible film material thus improving the mechanical characteristics. The purpose of this study was to determine the amount of lauric acid addition that produced biocomposites with the best characteristics. This study used experimental method. The different concentration of lauric acid used as the treatment was 0%, 10%, 20%, 30%, 40% from total solid of hydrocolloids materials (w/w). Data were analyzed statistically using the F test (ANOVA test) with confidence level of 95%. The results showed more than 10% addition of lauric acid decreased the value of moisture content, tensile strenght, percent elongation and water vapor transmission but increase thickness, opacity and transparency value. The addition of 10% lauric acid produced biocomposite with the best characteristics according to JIS (Japanese Industrial Standard) which had the moisture content of 42.65%, thickness of 0.047 mm, tensile strength of 13.8 MPa, percent elongation of 29.2%, water vapor transmission rate of 8.5 g/m2/day, opacity 8.9% and transparency 7.5. This research used renewable and biodegradable materials that can be applied to produce edible packaging with the best characteristics and eco-friendly.

Sign in / Sign up

Export Citation Format

Share Document