Estimate of Concrete Strength by Ultrasonic Pulse Velocity and Damping Constant

10.14359/7596 ◽  
1967 ◽  
Vol 64 (10) ◽  
Keyword(s):  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity

PENGKAJIAN KEKUATAN BETON STRUKTUR JEMBATAN PASCA KEBAKARAN

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Sudarmadi Sudarmadi
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Strength Assessment ◽  
Concrete Testing

In this paper a case study about concrete strength assessment of bridge structure experiencing fire is discussed. Assessment methods include activities of visual inspection, concrete testing by Hammer Test, Ultrasonic Pulse Velocity Test, and Core Test. Then, test results are compared with the requirement of RSNI T-12-2004. Test results show that surface concrete at the location of fire deteriorates so that its quality is decreased into the category of Very Poor with ultrasonic pulse velocity ranges between 1,14 – 1,74 km/s. From test results also it can be known that concrete compressive strength of inner part of bridge pier ranges about 267 – 274 kg/cm2 and concrete compressive strength of beam and plate experiencing fire directly is about 173 kg/cm2 and 159 kg/cm2. It can be concluded that surface concrete strength at the location of fire does not meet the requirement of RSNI T-12-2004. So, repair on surface concrete of pier, beam, and plate at the location of fire is required.

scholarly journals Factors influencing ultrasonic pulse velocity in concrete

2020 ◽  
Vol 13 (2) ◽  
pp. 222-247 ◽  
Author(s):  
J. P. GODINHO ◽  
T. F. DE SOUZA JÚNIOR ◽  
M. H. F. MEDEIROS ◽  
M. S. A SILVA
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Hydrated Calcium Silicate ◽  
Degree Of Hydration ◽  
Mix Proportion ◽  
Non Destructive ◽  
Cylindrical Test

Abstract The hydration process of Portland cement triggers reactions of stabilization of minerals from the contact of the clinker with water, which is the Hydrated Calcium Silicate (C-S-H), the Etringite (3CaO.Al2O3.3CaSO4.32H2O) and the Portlandite (Ca(OH)2). In order to understand the effects of the evolution of hydration in cement, it is possible to apply non-destructive tests. In this context, the objective of this work is to evaluate the influence of the type of cement, the curing age, of the format and humidity of the test specimens of concrete in the ultrasonic pulse velocity (UPV). In order to do that, 36 cylindrical test specimens (10 x 20 cm) and 9 cubic ones with 25 cm of edges, with mix proportion of 1:2,7:3,2 (cement/sand/gravel), water/cement ratio of 0.58 and three types of Portland cement (CP II-Z-32, CP IV-32 RS and CP V-ARI) were molded. With data obtained it was possible to correlate the increase of concrete strength along time (at ages of 7, 14, 28, 70 and 91 days) with the increase of the ultrasonic pulse velocity. Besides, it was possible to prove the direct influence of the concrete moisture and of the degree of hydration in the UPV. The shape of the test specimen generally had no influence on the results, except in the case of cement CP V ARI.

scholarly journals Evaluating Concrete Quality using Nondestructive In-situ Testing Methods

2019 ◽  
pp. 22-40
Author(s):  
Khalid Abdel Naser Abdel Rahim
Keyword(s):  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Initial Surface ◽  
In Situ Testing ◽  
Surface Absorption ◽  
Concrete Quality

This manuscript investigate the quality of concrete using non-destructive in-situ testing.The in-situ testing is a process by which different test are carried out such as rebound hammer, ultrasonic pulse veloc-ity, initial surface absorption test and fig air, to determine thein-situ strength, durability and deterioration, air permeability, concrete quality control andperformance. Additionally, the quality of concrete was researched using test methods with experimental results. Moreover, this research has found that (1) the increase in w/c ra-tioleads to a decrease in compressive strength and ultrasonic pulse velocity. Thus, lower w/cratio gives a bet-ter concrete strength in terms of quality, (2) the quicker the ultrasonic pulse travels through concrete indicates that the concrete is denser, therefore, better quality, (3) the lower initial surface absorption value indicates a better concrete with respect to porosity and (4) the w/c ratio plays an important role in the strength and per-meability of concrete.

scholarly journals Effect of Stone Dust on the Mechanical and Microstructural Properties of Opc based Concrete Subjected to Acid Exposure

2019 ◽  
Vol 8 (3) ◽  
pp. 7488-7492 ◽  
Keyword(s):  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Acid Exposure ◽  
Fine Aggregate ◽  
Cell Potential ◽  
Stone Dust ◽  
Different Types ◽  
Mechanical And Microstructural Properties

A separate approach of sustainable development is to make the structures durable. More durable structures need to be replaced less frequently and will reduce the need for cement. Such increase in durability can be achieved by choosing appropriate mix designs and selecting suitable aggregates and admixtures. In this experiment sand (fine aggregate) is partially replaced by stone dust to make the concrete mix sustainable in nature. This study also investigates the durability of different types of concrete in acid exposure. Cube compressive strengths of different mixes have been compared to see how the concrete strength differs from original mixes. In addition different types of non-destructive tests such as ultrasonic pulse velocity test, rebound hammer test and half-cell potential tests have also been performed on the concrete samples for better analysis of their strength and durability characteristics. Specimens were analysed through the Scanning Electron Microscope to understand the microstructural changes of concrete samples. Energy dispersion X-ray analysis was also done to understand the changes in the nature of the hydration products of some specimen.

scholarly journals Combined Use of Ultrasonic Pulse Velocity and Rebound Hammer for Structural Health Monitoring of Reinforced Concrete Structures

2019 ◽  
Author(s):  
Ahmed Lasisi ◽  
Obanishola Sadiq ◽  
Ibrahim Balogun
Keyword(s):  
Concrete Strength ◽  
Linear Regression Analysis ◽  
Concrete Structures ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Second Phase ◽  
Rebound Hammer ◽  
Combined Use ◽  
Non Destructive

This work investigates the use of Non-destructive tests as a tool for monitoring the structural performance of concrete structures. The investigation encompassed four phases; the first of which involved the use of destructive and non-destructive mechanisms to assess concrete strength on cube specimens. The second phase research focused on site assessment for a twin engineering theatre located at the Faculty of Engineering, University of Lagos using rebound hammer and ultrasonic pulse velocity tester. The third phase was the use of linear regression analysis model with MATLAB to establish a relationship between calibrated strength as well as ultrasonic pulse velocities with their corresponding compressive strength values on cubes and values obtained from existing structures. Results show that the root-mean squared-R2 values for rebound hammer ranged between 0.275 and 0.742 while ultrasonic pulse velocity R2 values were in the range of 0.649 and 0.952 for air curing and water curing systems respectively. It initially appeared that the Ultrasonic pulse velocity was more suitable for predicting concrete strength than rebound hammer but further investigations showed that the latter was adequate for early age concrete while the former was more suited for aging concrete. Hence, a combined use is recommended in this work.

Assessment of Compressive Strength for RC Building Using the Non-Destructive Test and the SonReb Method: A Case Study

2021 ◽  
Vol 1021 ◽  
pp. 45-54
Author(s):  
Mohammed Al-Helfi ◽  
Ali Allami
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Method ◽  
Technical Institute ◽  
Existing Building ◽  
Destructive Test ◽  
Non Destructive

Non-Destructive methods have greater advantage in assessing the homogeneity, compressive strength, corrosion of rebars in concrete etc. of damaged structures. The aim of the present study is to assess the existing building, which is 41 year old, in the Technical Institute of Amara affiliated with the Southern Technical University, Maysan, Iraq. The research focus on the assessment of the concrete strength and the inspection of the damages in the building. Besides the visual inspection, the ultrasonic pulse velocity and schmidt hammer were used as a non-destructive test method for testing of 30 columns and 15 beams for a building consisting of three floors. The concrete compressive strength was estimated by using SonReb method. The equations proposed by Gasparik, 1984, Di Leo & Pascale, 1994, Arioglu et al., 1996, Cristofaro et al. (EXP), 2020 and Cristofaro et al (PW), 2020 were used for assessment the compressive strength of oncrete. The non-destructive test results indicated that the average strength of the structural elements greater than the design compressive strength of the tested elements. Therefore, the building can be considered structurally is safe.

scholarly journals Effect of Improper Curing on the Properties of Normal Strength Concrete

2018 ◽  
Vol 8 (6) ◽  
pp. 3536-3540
Author(s):  
R. P. Memon ◽  
A. R. M. Sam ◽  
A. Z. Awang ◽  
U. I. Memon
Keyword(s):  
Cement Content ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Controlled Environment ◽  
Normal Strength Concrete ◽  
Normal Concrete ◽  
Normal Strength

In real applications, 28 days are regarded as proper curing time for concrete. There is a self-evident need to minimize the duration of curing days. For this purpose, this research investigates 1 to 7 days of curing and compares it with concrete cured for 28 days. Three grades of normal concrete strength grade 30, grade 35 and grade 40 were made. After curing, two exposure conditions were applied to the concrete, inside laboratory-controlled environment and outside environment. Results indicate that slump increases with cement content in DOE method at constant water content. The concrete density in all grades reduces when the concrete is subject to inside exposure in comparison with outside exposure. Water loss from concrete reduces with increase in curing days in all concrete grades. Compression strength of all concrete grades increases with increase in curing days. For the uniformity of concrete, ultrasonic pulse velocity indicated that with an increase in curing days, concrete becomes denser and a bit void. Results showed that an increase in curing days also improves the surface quality of concrete. The significance point noticed is that there was not much difference in the concrete properties between 7 days of curing and 28 days of curing in all grades.

THE EFFECT OF AGE ON THE COMPRESSIVE STRENGTH OF CONCRETE BY USING ULTRASONIC PULSE VELOCITY

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Qadri Ahmed Yousif ◽  
Idris Bedirhanoglu ◽  
Mehmet Enver Aydin ◽  
Ziwar Zebari
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Strength Development ◽  
The One ◽  
Non Destructive ◽  
Effect Of Age ◽  
Ready Mix Concrete

In this study, the effect of age on the strength development of concrete was investigated. For this purpose, specimens casted with ready mix concrete for different grades of concrete were obtained from ready-mix concrete firms available in Diyarbakir city which is the one of the biggest cities of Turkey. A few sets with different grade of concrete cube specimens were used in the experimental work. Each set included over 40 specimens. For measuring concrete strength development, two different tests were used: ultrasonic pulse velocity testing (UPV) and uniaxial compressive strength testing. After UPV and compressive strength tests, strength development for early ages was evaluated and defined. The aim of this work is to define the path of strength development of certain grades of concrete used in the east regions of Turkey. Another aim of the work is to be able to determine concrete strength through non-destructive UPV tests. As a result, it was seen that concrete strength development for early ages is not linearly proportional to age. Further, UPV measurements can give information on the progress of concrete strength.

Sign in / Sign up

Export Citation Format

Share Document