Cyclic Loading Test for Walls of Aspect Ratio 1.0 and 0.5 with Grade 550 MPa Shear Reinforcing Bars

2017 ◽  
Vol 114 (4) ◽  
Author(s):  
Jang-Woon Baek ◽  
Hong-Gun Park ◽  
Jae-Hoon Lee ◽  
Chang-Joon Bang
Keyword(s):  
Cyclic Loading ◽  
Aspect Ratio ◽  
Reinforcing Bars ◽  
Loading Test ◽  
Cyclic Loading Test

Cyclic Loading Test for Beam-Column Connections with 600 MPa (87 ksi) Beam Flexural Reinforcing Bars

2014 ◽  
Vol 111 (4) ◽  
Author(s):  
Hyeon-Jong Hwang ◽  
Hong-Gun Park ◽  
Won-Seok Choi ◽  
Lan Chung ◽  
Jin-Keun Kim
Keyword(s):  
Cyclic Loading ◽  
Reinforcing Bars ◽  
Loading Test ◽  
Cyclic Loading Test

Discrete element modeling of deformable pinewood chips in cyclic loading test

2019 ◽  
Vol 345 ◽  
pp. 1-14 ◽  
Author(s):  
Yidong Xia ◽  
Zhengshou Lai ◽  
Tyler Westover ◽  
Jordan Klinger ◽  
Hai Huang ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Discrete Element ◽  
Discrete Element Modeling ◽  
Loading Test ◽  
Cyclic Loading Test ◽  
Element Modeling

scholarly journals Biomechanical comparison of medial sustainable nail and proximal femoral nail antirotation in the treatment of an unstable intertrochanteric fracture

2020 ◽  
Vol 9 (12) ◽  
pp. 840-847
Author(s):  
Shaobo Nie ◽  
Ming Li ◽  
Hui Ji ◽  
Zhirui Li ◽  
Wenwen Li ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
Torsional Stiffness ◽  
Proximal Femoral Nail ◽  
Axial Stiffness ◽  
Intertrochanteric Fractures ◽  
Loading Test ◽  
Cyclic Loading Test ◽  
Femoral Nail ◽  
Unstable Intertrochanteric Fracture ◽  
The Mean

Aims Restoration of proximal medial femoral support is the keystone in the treatment of intertrochanteric fractures. None of the available implants are effective in constructing the medial femoral support. Medial sustainable nail (MSN-II) is a novel cephalomedullary nail designed for this. In this study, biomechanical difference between MSN-II and proximal femoral nail anti-rotation (PFNA-II) was compared to determine whether or not MSN-II can effectively reconstruct the medial femoral support. Methods A total of 36 synthetic femur models with simulated intertrochanteric fractures without medial support (AO/OTA 31-A2.3) were assigned to two groups with 18 specimens each for stabilization with MSN-II or PFNA-II. Each group was further divided into three subgroups of six specimens according to different experimental conditions respectively as follows: axial loading test; static torsional test; and cyclic loading test. Results The mean axial stiffness, vertical displacement, and maximum failure load of MSN-II were 258.47 N/mm (SD 42.27), 2.99 mm (SD 0.56), and 4,886 N (SD 525.31), respectively, while those of PFNA-II were 170.28 N/mm (SD 64.63), 4.86 mm (SD 1.66), and 3,870.87 N (SD 552.21), respectively. The mean torsional stiffness and failure torque of MSN-II were 1.72 N m/° (SD 0.61) and 16.54 N m (SD 7.06), respectively, while those of PFNA-II were 0.61 N m/° (SD 0.39) and 6.6 N m (SD 6.65), respectively. The displacement of MSN-II in each cycle point was less than that of PFNA-II in cyclic loading test. Significantly higher stiffness and less displacement were detected in the MSN-II group (p < 0.05). Conclusion The biomechanical performance of MSN-II was better than that of PFNA-II, suggesting that MSN-II may provide more effective mechanical support in the treatment of unstable intertrochanteric fractures. Cite this article: Bone Joint Res 2020;9(12):840–847.

Sign in / Sign up

Export Citation Format

Share Document