Shaking Table Tests on Reinforced Concrete Frames without Seismic Detailing

2013 ◽  
Vol 110 (06) ◽  
Keyword(s):  
Reinforced Concrete ◽  
Shaking Table ◽  
Shaking Table Tests ◽  
Concrete Frames ◽  
Reinforced Concrete Frames

SHAKING TABLE TESTS ON HAUNCH RETROFITTED REINFORCED CONCRETE FRAMES

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 233-240
Author(s):  
Junaid Akbar ◽  
Naveed Ahmad ◽  
Bashir Alam
Keyword(s):  
Reinforced Concrete ◽  
Shaking Table ◽  
Shaking Table Tests ◽  
Concrete Frames ◽  
Seismic Behaviour ◽  
Response Modification Factor ◽  
Rc Frames ◽  
Moment Resisting ◽  
Modification Factor ◽  
Rare Earthquake

Shaking table tests were performed on five one-third reduced scale two storey reinforced concrete (RC) moment resisting frames having construction defects (using low strength concrete without confining ties in beam-column joints, larger tie spacing, and reduced longitudinal and transverse reinforcements). The deficient frames were observed to have severe joint damageability, resulting in joint panel cover spalling and core concrete crushing. Haunch retrofitting technique was adopted to upgrade the seismic behaviour of deficient RC frames. Additional four deficient RC frames were built and retrofitted with steel haunch; both axially stiffer and deformable with energy dissipation, fixed to the beam-column connections to reduce shear demand on joint panels. The as-built and retrofitted frame seismic response modification factor (R) was calculated and compared to evaluate the viability of the haunch retrofitting technique. The haunch retrofitting technique increased the lateral stiffness and strength of the structure, resulting in the increase of structure overstrength. The retrofitting increased R factor by sixty percent to one hundred percent. The presented results indicate that the technique can significantly enhance the seismic performance of deficient RC frames, particularly against the frequent and rare earthquake events.

EXPERIMENTAL LIFE STUDIES OF REINFORCED CONCRETE FRAMES WITH GIRDERS REINFORCED BY INDIRECT REINFORCEMENT

2020 ◽  
Vol 87 (1) ◽  
pp. 92-100 ◽  
Author(s):  
N.V. FEDOROVA ◽  
◽  
FAN DINH GUOK ◽  
NGUYEN THI CHANG ◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Concrete Frames ◽  
Reinforced Concrete Frames

scholarly journals Investigation of Diagonal Strut Actions in Masonry-Infilled Reinforced Concrete Frames

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Seung-Jae Lee ◽  
Tae-Sung Eom ◽  
Eunjong Yu
Keyword(s):  
Reinforced Concrete ◽  
Failure Mode ◽  
Yield Criterion ◽  
Friction Angle ◽  
Concrete Frames ◽  
Element Analysis ◽  
Reinforced Concrete Frames ◽  
Infilled Frames ◽  
Masonry Infills ◽  
Push Down

AbstractThis study analytically investigated the behavior of reinforced concrete frames with masonry infills. For the analysis, VecTor2, a nonlinear finite element analysis program that implements the Modified Compression Field Theory and Disturbed Stress Field Model, was used. To account for the slip behavior at the mortar joints in the masonry element, the hyperbolic Mohr–Coulomb yield criterion, defined as a function of cohesion and friction angle, was used. The analysis results showed that the lateral resistance and failure mode of the infilled frames were significantly affected by the thickness of the masonry infill, cohesion on the mortar joint–brick interface, and poor mortar filling (or gap) on the masonry boundary under the beam. Diagonal strut actions developed along two or three load paths on the mortar infill, including the backstay actions near the tension column and push-down actions near the compression columns. Such backstay and push-down actions increased the axial and shear forces of columns, and ultimately affect the strength, ductility, and failure mode of the infilled frames.

scholarly journals Experimental testing of medium scale GFRP reinforced concrete frames

2019 ◽  
Vol 289 ◽  
pp. 04004
Author(s):  
George Hopartean ◽  
Ted Donchev ◽  
Diana Petkova ◽  
Costas Georgopoulos ◽  
Mukesh Limbachiya ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Experimental Testing ◽  
Control Sample ◽  
Concrete Frames ◽  
Reinforced Concrete Frames ◽  
Reinforced Polymers ◽  
Rc Structures ◽  
Gfrp Bars ◽  
Glass Frp ◽  
Reversed Cyclic

Fibre reinforced polymers (FRP) have been used as strengthening for existing RC structures for many decades. Lately, there has been a lot of interest in using FRP as internal reinforcement in beams, slabs and columns. One potential area of application could be reinforced concrete frames internally reinforced with GFRP bars. With limited research in this direction, the objective of this publication is to assess the behaviour of glass FRP (GFRP) reinforced concrete frames under reversed cyclic lateral in plane loading and to analyse the seismic performances of such elements. For the purpose of this paper, experimental testing of two 1/3 scaled down frames is conducted in displacement-controlled mode with the loading history according to ACI 374.1-05. The control sample is reinforced with conventional steel reinforcement and the results obtained are compared with the sample reinforced with GFRP bars. In summary, observations on the sample behaviour at specified drift ratio such as load-displacement behaviour, envelope curves and energy dissipation are presented.

Sign in / Sign up

Export Citation Format

Share Document