A Simple Method of Computing the Strength of Flat Reinforced Concrete Plates

1910 ◽  
Vol 6 (2) ◽  
Keyword(s):  
Reinforced Concrete ◽  
Simple Method ◽  
Concrete Plates

Strength and Deformation of Combined Beams with Side Reinforced Plates

2019 ◽  
Vol 968 ◽  
pp. 234-239
Author(s):  
Talyat Azizov ◽  
Oleksii Melnik ◽  
Oleksandr Myza
Keyword(s):  
Experimental Data ◽  
Reinforced Concrete ◽  
Experimental Studies ◽  
Calculated Data ◽  
Concrete Plate ◽  
Combined Action ◽  
Strength And Deformation ◽  
Concrete Plates ◽  
Good Agreement

The results of experimental studies of combined beams consisting of a stone part, reinforced with side reinforced concrete plates are given. Experimentally shown the viability of the proposed structures. The conditions for ensuring the combined action of a stone beam and a reinforced concrete plate are given. Cases are shown when one-sided plates can be used and when double-sided reinforced concrete plates can be used. A comparison of experimental data with the data calculated by the authors developed methods is given. A good agreement between theoretical and calculated data is shown.

Calculation of Ultimate Loads of Two-Way Reinforced Concrete Slabs

2012 ◽  
Vol 256-259 ◽  
pp. 850-854
Author(s):  
Yong Wang ◽  
Yu Li Dong
Keyword(s):  
Reinforced Concrete ◽  
Ultimate Load ◽  
Failure Criteria ◽  
Reinforcement Ratio ◽  
Concrete Slabs ◽  
Test Results ◽  
Simple Method ◽  
Simply Supported ◽  
Reinforced Concrete Slabs

This paper presents the latest developments of a simple method used to determine the ultimate load of two-way simply supported reinforced concrete slabs. Based on the reinforcement ratio, two failure criteria are proposed in the paper. The effectiveness of the developed model is validated through satisfactory comparison with from test results.

A Method for Deformation Analysis of Bar-Reinforced Concrete Filled Steel Tubular Columns under Axial Compression

2010 ◽  
Vol 163-167 ◽  
pp. 576-581
Author(s):  
Jin Sheng Han ◽  
Shu Ping Cong
Keyword(s):  
Reinforced Concrete ◽  
Axial Compression ◽  
Deformation Process ◽  
Steel Tube ◽  
Experimental Results ◽  
Lateral Strain ◽  
Deformation Analysis ◽  
Simple Method ◽  
Full Load ◽  
Short Columns

Based on experimental researches, a simple numerical analysis method was presented to simulate the full load-deformation process of bar-reinforced concrete filled steel tubular short columns subjected to axial compression. Firstly, the interaction process of steel tube and concrete was analyzed, and then, the simplified constitutive models of steel tube and concrete were established on the base of previous analysis results. Secondly, the relation between lateral and longitudinal strain of steel tube was analyzed based on experimental results, and a simple method was presented to calculate the lateral strain of steel tube. Finally, a program was worked out to simulate the full load-deformation process of bar-reinforced concrete filled steel tubular short columns. The program’s simulation results of both ultimate bearing capacity and load-deformation curves are in good agreement with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document