Seismic Repair and Strengthening of a Severely Damaged Concrete Frame

10.14359/1157 ◽  
1995 ◽  
Vol 92 (2) ◽  
Keyword(s):  
Concrete Frame ◽  
Seismic Repair

scholarly journals Effect of Frequency Characteristics of Ground Motion on Response of Tuned Mass Damper Controlled Inelastic Concrete Frame

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 74
Author(s):  
Md Motiur Rahman ◽  
Tahmina Tasnim Nahar ◽  
Dookie Kim
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Tuned Mass Damper ◽  
Frequency Characteristics ◽  
Building Frames ◽  
Concrete Frame ◽  
Finite Element Software ◽  
Mass Damper ◽  
Lateral Displacements ◽  
Modal Mass

This paper investigates the performance of tuned mass damper (TMD) and dynamic behavior of TMD-controlled concrete structure considering the ground motion (GM) characteristics based on frequency content. The effectiveness of TMD in reducing the structural response and probability of collapse of the building frames are affected by the frequency characteristics of GMs. To attenuate the seismic vibration of the buildings, the TMD controlled building has been designed based on the modal analysis (modal frequencies and modal mass participation ratio). In this study, to investigate the performance of TMD, four different heights (i.e., 3, 5, 10, 20 stories) inelastic concrete moment-resisting frames equipped with TMDs are developed using an open-source finite element software. A series of numerical analyses have been conducted using sixty earthquakes classified into three categories corresponding to low, medium, and high-frequency characteristics of GMs. To evaluate the proposed strategy, peak lateral displacements, inter-story drift, and the probability of collapse using fragility analysis have been investigated through the structures equipped with and without TMD. The results appraise the effect of TMD and compare the seismic responses of earthquake frequency contents and the vibration control system of the inelastic building frames.

scholarly journals Strength and deformation of bending normal sections made of concrete frame structure

2021 ◽  
Vol 1083 (1) ◽  
pp. 012034
Author(s):  
D R Mailyan ◽  
G V Nesvetaev ◽  
Yu I Koryanova ◽  
E V Lesniak
Keyword(s):  
Frame Structure ◽  
Concrete Frame ◽  
Strength And Deformation

scholarly journals Shear Behavior of a Reinforced Concrete Frame Retrofitted with a Hinged Steel Damping System

2020 ◽  
Vol 12 (24) ◽  
pp. 10360
Author(s):  
Hyun-Do Yun ◽  
Sun-Woong Kim ◽  
Wan-Shin Park ◽  
Sun-Woo Kim
Keyword(s):  
Reinforced Concrete ◽  
Shear Behavior ◽  
Seismic Retrofitting ◽  
Reinforced Concrete Frame ◽  
Main Research ◽  
Torsion Spring ◽  
Concrete Frame ◽  
Energy Dissipation Capacity ◽  
Research Questions ◽  
Torsion Springs

The purpose of this study was to experimentally evaluate the effect of a hinged steel damping system on the shear behavior of a nonductile reinforced concrete frame with an opening. For the experimental test, a total of three full-scale reinforced concrete frame specimens were planned, based on the “no retrofitting” (NR) specimens with non-seismic details. The main research questions were whether the hinged steel damping system is reinforced and whether torsion springs are installed in the hinged steel damping system. From the results of the experiment, the hinged steel damping system (DR specimen) was found to be effective in seismic retrofitting, while isolating the opening of the reinforced concrete (RC) frame, and the torsion spring installed at the hinged connection (DSR specimen) was evaluated to be effective in controlling the amount of deformation of the upper and lower dampers. The strength, stiffness, and energy dissipation capacity of the DSR specimen were slightly improved compared to the DR specimen, and it was confirmed that stress redistribution was induced by the rotational stiffness of the torsion spring installed in the hinge connection between the upper and lower frames.

scholarly journals Challenges in Evaluating Seismic Collapse Risk for RC Buildings

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Jin Zhou ◽  
Zhelun Zhang ◽  
Tessa Williams ◽  
Sashi K. Kunnath
Keyword(s):  
Ground Motion ◽  
Seismic Vulnerability ◽  
Ground Motions ◽  
Primary System ◽  
Fragility Functions ◽  
Reinforced Concrete Frame ◽  
Ground Motion Selection ◽  
Concrete Frame ◽  
Frame Building ◽  
Seismic Collapse

AbstractThe development of fragility functions that express the probability of collapse of a building as a function of some ground motion intensity measure is an effective tool to assess seismic vulnerability of structures. However, a number of factors ranging from ground motion selection to modeling decisions can influence the quantification of collapse probability. A methodical investigation was carried out to examine the effects of component modeling and ground motion selection in establishing demand and collapse risk of a typical reinforced concrete frame building. The primary system considered in this study is a modern 6-story RC moment frame building that was designed to current code provisions in a seismically active region. Both concentrated and distributed plasticity beam–column elements were used to model the building frame and several options were considered in constitutive modeling for both options. Incremental dynamic analyses (IDA) were carried out using two suites of ground motions—the first set comprised site-dependent ground motions, while the second set was a compilation of hazard-consistent motions using the conditional scenario spectra approach. Findings from the study highlight the influence of modeling decisions and ground motion selection in the development of seismic collapse fragility functions and the characterization of risk for various demand levels.

scholarly journals Rational Choice of Reinforcement of Reinforced Concrete Frame Corners Subjected to Opening Bending Moment

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3438
Author(s):  
Michał Szczecina ◽  
Andrzej Winnicki
Keyword(s):  
Cross Section ◽  
Bending Moment ◽  
Plasticity Model ◽  
Reinforced Concrete Frame ◽  
Moment Frame ◽  
Concrete Frame ◽  
Rational Reinforcement ◽  
Eurocode 2 ◽  
Analysis Of Results

This paper discusses a choice of the most rational reinforcement details for frame corners subjected to opening bending moment. Frame corners formed from elements of both the same and different cross section heights are considered. The case of corners formed of elements of different cross section is not considered in Eurocode 2 and is very rarely described in handbooks. Several reinforcement details with both the same and different cross section heights are presented. The authors introduce a new reinforcement detail for the different cross section heights. The considered details are comprised of the primary reinforcement in the form of straight bars and loops and the additional reinforcement in the form of diagonal bars or stirrups or a combination of both diagonal stirrups and bars. Two methods of static analysis, strut-and-tie method (S&T) and finite element method (FEM), are used in the research. FEM calculations are performed with Abaqus software using the Concrete Damaged Plasticity model (CDP) for concrete and the classical metal plasticity model for reinforcing steel. The crucial CDP parameters, relaxation time and dilatation angle, were calibrated in numerical tests in Abaqus. The analysis of results from the S&T and FE methods allowed for the determination of the most rational reinforcement details.

Sign in / Sign up

Export Citation Format

Share Document