scholarly journals Influencing Factors on the Dielectric Breakdown Strength in F-gas Free High-voltage Switchgear

2017 ◽  
Vol 4 (1) ◽  
pp. 52-55
Author(s):  
S. Gossmann ◽  
B. Lutz ◽  
P. G. Nikolic
Keyword(s):  
Experimental Data ◽  
Influencing Factors ◽  
High Voltage ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Inhomogeneous Field ◽  
European Regulation ◽  
Dielectric Breakdown Strength ◽  
Clean Air ◽  
Gas Pressures

After being in the focus of sciences' and industry's research and development activities for many years, the investigation of possible SF<sub>6</sub> gas-alternatives has been even more intensified after the revision of the European regulation on fluorinated gases in 2014. In this contribution the influencing factors on the dielectric breakdown of clean air are investigated for weak inhomogeneous field and gas pressures up to 10 bar. Modelling approaches and experimental data are compared.

scholarly journals Dielectric Breakdown Strength and Energy Storage Density of CCTO-ZBS Electroceramic

2020 ◽  
Vol 596 ◽  
pp. 012006
Author(s):  
Muhammad Qusyairie Saari ◽  
Julie Juliewatty Mohamed ◽  
Muhammad Azwadi Sulaiman ◽  
Mohd Fariz Abd Rahman ◽  
Zainal Arifin Ahmad ◽  
...  
Keyword(s):  
Energy Storage ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Energy Storage Density ◽  
Dielectric Breakdown Strength ◽  
Storage Density

Influence of Chromium Ions on the Dielectric Properties of the PbO-Ga2O3-P2O5 Glass System

2007 ◽  
Vol 62 (5-6) ◽  
pp. 315-323 ◽  
Author(s):  
Gnanaprakasm Little Flower ◽  
Maddireddy Srinivasa Reddy ◽  
Musugu Venkata Ramana Reddy ◽  
Nalluri Veeraiah
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Dielectric Properties ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Oxidation States ◽  
Optical Absorption Spectra ◽  
Dielectric Breakdown Strength ◽  
Chromium Ions ◽  
Wide Range

PbO-Ga2O3-P2O5 glasses containing different amounts of Cr2O3, ranging from 0 to 1.0 mol%, were prepared. The dielectric properties (viz., constant ε’, loss tanδ , ac conductivity σac over a wide range of frequencies and temperatures, dielectric breakdown strength) have been studied as a function of the concentration of chromium ions. An anomaly has been observed in the dielectric properties of these glasses, when the concentration of Cr2O3 is about 0.4 mol%. This anomaly has been explained in the light of different oxidation states of chromium ions with the aid of data of differential thermal analysis and optical absorption spectra of these glasses.

Dielectric Breakdown Mechanism of Perovskite-Structured Ceramics

2015 ◽  
Vol 2015 (CICMT) ◽  
pp. 000116-000120 ◽  
Author(s):  
Takuya Hoshina ◽  
Mikio Yamazaki ◽  
Hiroaki Takeda ◽  
Takaaki Tsurumi
Keyword(s):  
High Temperature ◽  
Room Temperature ◽  
Oxygen Vacancies ◽  
Dielectric Breakdown ◽  
Breakdown Strength ◽  
Dielectric Breakdown Strength ◽  
Breakdown Mechanism ◽  
High Dielectric ◽  
Measurement Efficiency ◽  
Breakdown Model

We precisely measured the dielectric breakdown strength of SrTiO3, CaTiO3, and CaZrO3 ceramics as a function of temperature, and revealed the dielectric breakdown mechanism of the ceramics. For the dielectric breakdown test, ceramics specimens with a lot of round-bottom holes were prepared. Using the specimens, the breakdown positions were stabilized and a reliability of breakdown strength was improved as well as the measurement efficiency. As a result of the dielectric breakdown tests, it was found that the dielectric breakdown strength decreased with increasing permittivity at room temperature and the permittivity dependence of breakdown strength obeyed Griffith type energy release rate model. At high temperature above 100ºC, the dielectric breakdown mechanism of SrTiO3 and CaTiO3 ceramics was explained by an intrinsic breakdown model. In contrast, an intrinsic dielectric breakdown of CaZrO3 ceramics didn't occur in the measurement temperature range up to 210ºC. To obtain a high dielectric breakdown strength at high temperature, the dielectric permittivity is required to be low to some extent and the defect concentration of oxygen vacancies should be minimized in the perovskite-structured oxide.

Sign in / Sign up

Export Citation Format

Share Document