scholarly journals Influence of Different Drying Conditions on High Strength Concrete Compressive Strength

10.14311/228 ◽  
2001 ◽  
Vol 41 (3) ◽  
Author(s):  
M. Safan ◽  
A. Kohoutková
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
High Strength ◽  
Strength Development ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Development Rates ◽  
Drying Conditions

The influence of different drying conditions on the compressive strength and strength development rates of high strength concrete up to an age of 28 days was evaluated. Two HSC mixes with and without silica fume addition were used to cast cubes of 10 cm size. The cubes were stored in different drying conditions until the age of testing at 3, 7, 28 days.

Analysis of Post-Combustion High-Strength Concrete Compressive Strength Using Polypropylene Fibers

2020 ◽  
Vol 26 (1) ◽  
pp. 118-127
Author(s):  
Teuku Budi Aulia ◽  
Muttaqin Muttaqin ◽  
Mochammad Afifuddin ◽  
Zahra Amalia
Keyword(s):  
Compressive Strength ◽  
Thermal Stress ◽  
Silica Fume ◽  
High Temperatures ◽  
High Strength Concrete ◽  
High Strength ◽  
Polypropylene Fibers ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Maximum Value

High-strength concrete is vulnerable to high temperatures due to its high density. The use of polypropylene fibers could prevent structure explosion by forming canals due to melted fibers during fire, thus release its thermal stress. This study aims to determine the effect of polypropylene fibers on compressive strength of high-strength concrete after combustion at 400ºC for five hours. High-strength concrete was made by w/c-ratio 0.3 with cement amount 550 kg/m3 and added with silica fume 8% and superplasticizer 4% by cement weight. The variations of polypropylene fibers were 0%, 0.2% and 0.4% of concrete volume. The compression test was carried out on standard cylinders Ø15/30 cm of combustion and without combustion specimens at 7 and 28 days. The results showed that compressive strength of high-strength concretes without using polypropylene fibers decreased in post-combustion compared with specimens without combustion, i.e., 0.81% at 7 days and 23.42% at 28 days. Conversely, the use of polypropylene fibers can increase post-combustion compressive strength with a maximum value resulted in adding 0.2% which are 25.52% and 10.44% at 7 and 28 days respectively. It can be concluded that the use of polypropylene fibers is effective to prevent reduction of high-strength concrete compressive strength that are burned at high temperatures.

scholarly journals Effect of Curing Temperature Histories on the Compressive Strength Development of High-Strength Concrete

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Keun-Hyeok Yang ◽  
Jae-Sung Mun ◽  
Myung-Sug Cho
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Relative Strength ◽  
Curing Temperature ◽  
Strength Development ◽  
Curing Conditions ◽  
Strength Concrete ◽  
Equivalent Age ◽  
Compressive Strength Development

This study examined the relative strength-maturity relationship of high-strength concrete (HSC) specifically developed for nuclear facility structures while considering the economic efficiency and durability of the concrete. Two types of mixture proportions with water-to-binder ratios of 0.4 and 0.28 were tested under different temperature histories including (1) isothermal curing conditions of 5°C, 20°C, and 40°C and (2) terraced temperature histories of 20°C for an initial age of individual 1, 3, or 7 days and a constant temperature of 5°C for the subsequent ages. On the basis of the test results, the traditional maturity function of an equivalent age was modified to consider the offset maturity and the insignificance of subsequent curing temperature after an age of 3 days on later strength of concrete. To determine the key parameters in the maturity function, the setting behavior, apparent activation energy, and rate constant of the prepared mixtures were also measured. This study reveals that the compressive strength development of HSC cured at the reference temperature for an early age of 3 days is insignificantly affected by the subsequent curing temperature histories. The proposed maturity approach with the modified equivalent age accurately predicts the strength development of HSC.

Background to seismic design provisions in CSA A23.3–04 for high-strength concrete

2009 ◽  
Vol 36 (4) ◽  
pp. 565-579 ◽  
Author(s):  
Patrick Paultre ◽  
Denis Mitchell
Keyword(s):  
Compressive Strength ◽  
Seismic Design ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
Concrete Structures ◽  
High Strength ◽  
Frame Structure ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Loading Tests

This paper presents the background experimental and analytical research that was carried out to develop the provisions for the seismic design of high-strength concrete structures in the 2004 Canadian standard CSA A23.3–04. It is noted that the 1994 Canadian standard CSA A23.3–94 limited the concrete compressive strength to 55 MPa for the seismic design of nominally ductile and ductile structures, while the 1995 New Zealand Standard limited the concrete compressive strength to 70 MPa. In contrast, the 2008 American Concrete Institute (ACI) code ACI 318M has no upper limit on concrete strength, even for the seismic design of ductile structural elements. This tremendous variation in these limits indicated that more experimental evidence was needed. This paper presents experimental results of reversed cyclic loading tests on large-scale structural components as well as simulated seismic loading tests of a frame structure constructed with high-strength concrete. The goal of this collaborative research program at the University of Sherbrooke and McGill University was to determine the seismic design and detailing requirements for high-strength concrete structures to achieve the desired level of ductility and energy dissipation. The experimental programs include full-scale testing of the following: columns subjected to a pure axial load (square and circular columns); columns subjected to flexure and axial loads; beam-column subassemblages (square and circular columns); coupling beams in coupled wall structures; shear walls and a two-storey, three-dimensional frame structure. The results of the responses of the high-strength concrete structural specimens are compared with the responses of companion specimens constructed with normal-strength concrete.

scholarly journals BEHAVIOUR OF HIGH-STRENGTH CONCRETE CIRCULAR COLUMNS CONFINED BY HIGH-STRENGTH SPIRALS UNDER CONCENTRIC COMPRESSION

2020 ◽  
Vol 26 (6) ◽  
pp. 564-578
Author(s):  
Chongchi Hou ◽  
Wenzhong Zheng ◽  
Wei Chang
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Columns ◽  
Confined Concrete ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Proposed Model ◽  
High Strength Concrete Columns

This paper tested the behaviour of 32 high-strength concrete columns confined by high-strength spirals under concentric compression. The test parameters included unconfined concrete compressive strength, spiral yield strength, volumetric ratio, and spiral spacing. The results showed that bulging and shear sliding were the two characteristic types of failure patterns of the thirty-two confined columns, depending on spiral spacing and concrete strength. Moreover, the spiral in most specimens did not yield at the confined concrete compressive strength. An analytical confinement model for high-strength concrete columns confined by high-strength spirals was proposed. In this proposed model, the calculated value of the spiral stress at the confined concrete compressive strength was used to calculate the feature points of the stressstrain curve. The proposed model showed good correlations with available experimental results of 64 columns.

Compressive Strength Development of High-Strength Concrete under Different Curing Temperatures

2014 ◽  
Vol 905 ◽  
pp. 195-198 ◽  
Author(s):  
Keun Hyeok Yang ◽  
Jae Sung Mun ◽  
Jae Eun Jeong
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Relative Strength ◽  
Curing Temperature ◽  
Strength Development ◽  
Strength Gain ◽  
Strength Concrete ◽  
Compressive Strength Development ◽  
Measured Strength

The present study examined the in-place strength of high-strength concrete based on the relative strength-maturity relationship. The measured strength gain of high-strength concrete was compared with the predictions obtained from the modified maturity function to consider the offset maturity and the insignificance of subsequent curing temperature after an age of 3 days on later strength of concrete. This study demonstrates that the compressive strength gain of concrete cured at the reference temperature (20°C) for an early age of 3 days is little affected by the subsequent curing temperature histories.

Sign in / Sign up

Export Citation Format

Share Document