scholarly journals STUDY ON DRYING SHRINKAGE CRACKING PROPERTIES OF FLY ASH MORTAR UNDER DIFFERENT DRYING CONDITIONS

2017 ◽  
Vol 71 (1) ◽  
pp. 386-393
Author(s):  
Satoshi YOSHIKAWA ◽  
Yoshiaki SATO ◽  
Toshihiro OTANI ◽  
Kenji UEDA
Keyword(s):  
Fly Ash ◽  
Drying Shrinkage ◽  
Shrinkage Cracking ◽  
Drying Conditions

Influence of SO3 Content on Drying Shrinkage Cracking Resistance of Cement-Fly Ash Stabilized Crushed-Stones

2009 ◽  
Vol 620-622 ◽  
pp. 279-282
Author(s):  
Xiao Chen ◽  
Ming Kai Zhou ◽  
Zhi Yong Fan
Keyword(s):  
Fly Ash ◽  
Drying Shrinkage ◽  
Cracking Resistance ◽  
Shrinkage Cracking ◽  
Pavement Base ◽  
Suitable Scope

The cement-fly ash stabilized crushed-stones are prepared with different cements, which SO3 contents are 1.8%,2.6%,3.4%,4.2%,5.0%,5.8% and 8.8%，and their 28d splitting strengths, 28d resilient modulus’s, expansion -shrinkage and dry shrink anti cracking coefficients are studied. On these bases, the influence of SO3 content of cement on shrinkage cracking resistance is analyzed. The mechanism of compensating shrinkage by micro expansion in pavement base and the function of SO3 on cement-fly ash binder are also explored in paper. It is proved that the increase of SO3 content in a suitable scope (1.8%-5.8%) can improve the drying shrinkage cracking resistance of cement-fly ash stabilized crushed-stones when the content of fly ash is 10%。But the structure and the performance of materials will be destroyed if the SO3 content of cement increases excessively (>8.8%).

scholarly journals Restrained Stress Development in Hardening Mortar Internally Cured with Superabsorbent Polymers under Autogenous and Drying Conditions

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 979
Author(s):  
Jung Heum Yeon
Keyword(s):  
Autogenous Shrinkage ◽  
Drying Shrinkage ◽  
Early Age ◽  
Shrinkage Cracking ◽  
Stress Development ◽  
Cracking Potential ◽  
Different Types ◽  
Internal Relative Humidity ◽  
Series Of Experiments ◽  
Drying Conditions

This study reports the results of a series of experiments, particularly paying attention to the early-age behavior and response of hardening mortars incorporating different types and contents of superabsorbent polymer (SAP) under autogenous (sealed) and drying shrinkage (unsealed) conditions. To achieve this primary aim, the effects of SAP type (i.e., cross-linking density and grain size) and content on the internal relative humidity (IRH) changes and corresponding free shrinkage behavior, restrained stress development, and cracking potential of the mortar were extensively measured and analyzed, along with their strength and set time properties. The results of this study have shown that the internal curing (IC) via SAP effectively counteracted the early-age residual stress build-up due to autogenous shrinkage, as many other former studies described. No or little tensile residual stresses due to autogenous shrinkage took place when more than 0.4% SAP was added, regardless of the SAP type. However, it should be mentioned that the addition of SAP, irrespective of its content and type, hardly improved the shrinkage cracking resistance of the mortar when directly exposed to drying environment at early ages.

scholarly journals Effect of Fly Ash on Compressive Strength, Drying Shrinkage, and Carbonation Depth of Mortar with Ferronickel-Slag Powder

2021 ◽  
Vol 11 (3) ◽  
pp. 1037
Author(s):  
Se-Jin Choi ◽  
Ji-Hwan Kim ◽  
Sung-Ho Bae ◽  
Tae-Gue Oh
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Construction Industry ◽  
Bituminous Coal ◽  
Raw Materials ◽  
Drying Shrinkage ◽  
The Other ◽  
Test Results ◽  
Slag Powder ◽  
Ferronickel Slag

In recent years, efforts to reduce greenhouse gas emissions have continued worldwide. In the construction industry, a large amount of CO2 is generated during the production of Portland cement, and various studies are being conducted to reduce the amount of cement and enable the use of cement substitutes. Ferronickel slag is a by-product generated by melting materials such as nickel ore and bituminous coal, which are used as raw materials to produce ferronickel at high temperatures. In this study, we investigated the fluidity, microhydration heat, compressive strength, drying shrinkage, and carbonation characteristics of a ternary cement mortar including ferronickel-slag powder and fly ash. According to the test results, the microhydration heat of the FA20FN00 sample was slightly higher than that of the FA00FN20 sample. The 28-day compressive strength of the FA20FN00 mix was approximately 39.6 MPa, which was higher than that of the other samples, whereas the compressive strength of the FA05FN15 mix including 15% of ferronickel-slag powder was approximately 11.6% lower than that of the FA20FN00 mix. The drying shrinkage of the FA20FN00 sample without ferronickel-slag powder was the highest after 56 days, whereas the FA00FN20 sample without fly ash showed the lowest shrinkage compared to the other mixes.

scholarly journals Effect of CaSO4 Incorporation on Pore Structure and Drying Shrinkage of Alkali-Activated Binders

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1673 ◽  
Author(s):  
Hyeongmin Son ◽  
Sol Moi Park ◽  
Joon Ho Seo ◽  
Haeng Ki Lee
Keyword(s):  
Fly Ash ◽  
Pore Structure ◽  
Drying Shrinkage ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
Activated Slag ◽  
Capillary Tension ◽  
Alkali Activated Binders ◽  
Internal Pore Structure ◽  
Alkali Activated

This present study investigates the effects of CaSO4 incorporation on the pore structure and drying shrinkage of alkali-activated slag and fly ash. The slag and fly ash were activated at a 5:5 ratio by weighing with a sodium silicate. Thereafter, 0%, 5%, 10%, and 15% of CaSO4 were incorporated to investigate the changes in phase formation and internal pore structure. X-Ray Diffraction (XRD), thermogravimetry (TG)/derivative thermogravimetry (DTG), mercury intrusion porosimetry (MIP), nuclear magnetic resonance (NMR), and drying shrinkage tests were carried out to find the correlation between the pore structure and drying shrinkage of the specimens. The results showed that CaSO4 incorporation increased the formation of thenardite, and these phase changes affected the pore structure of the activated fly ash and slag. The increase in the CaSO4 content increased the pore distribution in the mesopore. As a result, the capillary tension and drying shrinkage decreased.

scholarly journals Long-Term Physical and Mechanical Properties and Microstructures of Fly-Ash-Based Geopolymer Composite Incorporating Carbide Slag

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6692
Author(s):  
Xianhui Zhao ◽  
Haoyu Wang ◽  
Linlin Jiang ◽  
Lingchao Meng ◽  
Boyu Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Room Temperature ◽  
Physical And Mechanical Properties ◽  
Drying Shrinkage ◽  
Fine Aggregate ◽  
Property Development ◽  
Industrial Solid Waste ◽  
Carbide Slag

The long-term property development of fly ash (FA)-based geopolymer (FA−GEO) incorporating industrial solid waste carbide slag (CS) for up to 360 d is still unclear. The objective of this study was to investigate the fresh, physical, and mechanical properties and microstructures of FA−GEO composites with CS and to evaluate the effects of CS when the composites were cured for 360 d. FA−GEO composites with CS were manufactured using FA (as an aluminosilicate precursor), CS (as a calcium additive), NaOH solution (as an alkali activator), and standard sand (as a fine aggregate). The fresh property and long-term physical properties were measured, including fluidity, bulk density, porosity, and drying shrinkage. The flexural and compressive strengths at 60 d and 360 d were tested. Furthermore, the microstructures and gel products were characterized by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). The results show that the additional 20.0% CS reduces the fluidity and increases the conductivity of FA−GEO composites. Bulk densities were decreased, porosities were increased, and drying shrinkages were decreased as the CS content was increased from 0.0% to 20.0% at 360 d. Room temperature is a better curing condition to obtain a higher long-term mechanical strength. The addition of 20.0% CS is more beneficial to the improvement of long-term flexural strength and toughness at room temperature. The gel products in CS−FA−GEO with 20.0% CS are mainly determined as the mixtures of sodium aluminosilicate (N−A−S−H) gel and calcium silicate hydration (C−S−H) gel, besides the surficial pan-alkali. The research results provide an experimental basis for the reuse of CS in various scenarios.

Control of Cracking with Shrinkage-Reducing Admixtures

1997 ◽  
Vol 1574 (1) ◽  
pp. 25-36 ◽  
Author(s):  
Surendra P. Shah ◽  
Shashidhara Marikunte ◽  
Wei Yang ◽  
Corina Aldea
Keyword(s):  
Drying Shrinkage ◽  
Plain Concrete ◽  
Type Specimen ◽  
Wire Mesh ◽  
Restrained Shrinkage ◽  
Shrinkage Cracking ◽  
Restrained Shrinkage Cracking ◽  
Tensile Forces ◽  
Parking Garages ◽  
Shrinkage Reducing Admixtures

Shrinkage cracking can be a critical problem in concrete construction, especially for flat structures such as highway pavements, slabs for parking garages, and bridge decks. One way to reduce the shrinkage cracking is to provide reinforcement in the form of wire mesh to resist tensile forces. In recent years, short, randomly distributed fibers have been used to control shrinkage cracking. The efficiency of shrinkage-reducing admixtures (SRAs) in controlling restrained shrinkage cracking of concrete is reviewed. A ring-type specimen was used for restrained shrinkage cracking tests. The SRA selected for this investigation was a propylene glycol derivative, which was used at 1 and 2 percent by weight of cement. Free (unrestrained) shrinkage, weight loss, compressive strength, and fracture toughness were also investigated. The results of SRA concretes were compared with that of plain concrete with the same water-to-cement ratio. A theoretical model based on nonlinear fracture mechanics was developed for predicting transverse cracking of the concrete ring specimen caused by drying shrinkage. The model prediction of time to cracking compared well with the experimental data. The model can be extended to different geometries and dimensions than those considered in this research.

Drying shrinkage cracking of concrete using dune sand and crushed sand

2016 ◽  
Vol 126 ◽  
pp. 517-526 ◽  
Author(s):  
Euibae Lee ◽  
Sangjun Park ◽  
Yongjic Kim
Keyword(s):  
Drying Shrinkage ◽  
Dune Sand ◽  
Shrinkage Cracking

scholarly journals Experimental Study on Durability Improvement of Fly Ash Concrete with Durability Improving Admixture

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Hong-zhu Quan ◽  
Hideo Kasami
Keyword(s):  
Fly Ash ◽  
Experimental Studies ◽  
Drying Shrinkage ◽  
Replacement Ratio ◽  
Fly Ash Concrete ◽  
Air Content ◽  
Carbonation Resistance ◽  
Binder Ratio ◽  
Water Binder Ratio

In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete, the compressive strength of fly ash concrete can be improved by 10%–20%, and the drying shrinkage is reduced by 60%. Carbonation resistance of concrete is roughly proportional to water-cement ratio regardless of water-binder ratio and fly ash replacement ratio. For the specimens cured in air for 2 weeks, the freezing-thawing resistance is improved. In addition, by making use of durability improving admixture, it is easier to control the air content and make fly ash concrete into nonair-entraining one. The quality of fly ash concrete is thereby optimized.

Sign in / Sign up

Export Citation Format

Share Document