scholarly journals INFLUENCE OF FROST DAMAGE WITH DEICING AGENTS ON HYDRATION PRODUCTS AND TENSILE SOFTENING BAHAVIOR

2011 ◽  
Vol 65 (1) ◽  
pp. 400-405
Author(s):  
Katsufumi HASHIMOTO ◽  
Hiroshi YOKOTA ◽  
Yasuhiko SATO ◽  
Takafumi SUGIYAMA
Keyword(s):  
Frost Damage ◽  
Hydration Products ◽  
Tensile Softening ◽  
Deicing Agents

Milestone solution for snow removal problem in Moscow

2019 ◽  
pp. 66-72
Keyword(s):  
New Technologies ◽  
Environmental Safety ◽  
Winter Period ◽  
Special Importance ◽  
Master Plan ◽  
Infrastructure Development ◽  
Snow Removal ◽  
Surface Areas ◽  
The City ◽  
Deicing Agents

The main principle of the strategy for the complex improvement of the functioning of northern cities in winter, including their infrastructure development, is a comprehensive solution of the problem of industrial-scale snow-mass collection, removal and utilization at different areas of urban roadway networks. For its implementation in the capital of Russia, “MosvodokanalNIIproject” JSC developed in 2002 the Snow Removal Master Plan for the city of Moscow. The meteorological conditions in the city, which have changed considerably in the recent years, including the changes in the snow-cover depth and in the road-surface areas to be cleaned, as well as emerging of new technologies for the cleaning of urban streets, yards and sidewalks and some new types of deicing agents, resulted in the necessity to update the above-mentioned Snow Removal Master Plan developed for the city of Moscow. Efficient application of deicing agents is of special importance for its updating in the context of the environmental safety of the city in a winter period. The article considers the results of the implementation of the updated Snow Removal Master Plan and contains some proposals concerning snow removal under the conditions of extreme snowfalls.

Vulnerability of sweet cherry cultivars to continuous periods of spring frosts in Plovdiv, Bulgaria

2020 ◽  
Vol 12 (4) ◽  
pp. 348-352
Author(s):  
S. Malchev ◽  
S. Savchovska
Keyword(s):  
Sweet Cherry ◽  
Weather Conditions ◽  
Frost Damage ◽  
Cold Weather ◽  
Bud Burst ◽  
Intermediate Group ◽  
Air Temperatures ◽  
Wide Range ◽  
Group Form ◽  
Sweet Cherry Cultivars

Abstract. The periods with continuous freezing air temperatures reported during the spring of 2020 (13 incidents) affected a wide range of local and introduced sweet cherry cultivars in the region of Plovdiv. They vary from -0.6°C on March 02 to -4.9°C on March 16-17. The duration of influence of the lowest temperatures is 6 and 12 hours between March 16 and 17. The inspection of fruit buds and flowers was conducted twice (on March 26 and April 08) at different phenological stages after continuous waves of cold weather conditions alternated with high temperatures. During the phenological phase ‘bud burst’ (tight cluster or BBCH 55) some of the flowers in the buds did not develop further making the damage hardly detectable. The most damaged are hybrid El.28-21 (95.00%), ‘Van’ (91.89%) and ‘Bing’ (89.41%) and from the next group ‘Lapins’ (85.98%) and ‘Rosita’ (83.33%). A larger intermediate group form ‘Kossara’ (81.67%), ‘Rozalina’ (76.00%), ‘Sunburst’ (75.00%), ‘Bigarreau Burlat’ (69.11%) and ‘Kuklenska belitza’ (66.67%). Candidate-cultivar El.17-90 ‘Asparuh’ has the lowest frost damage values of 55.00% and El.17-37 ‘Tzvetina’ with damage of 50.60%.

Interaction Between CPPU and NAA on Fruit Thinning and Fruit Development in Selected Apple Cultivars

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 513c-513 ◽  
Author(s):  
Martin J. Bukovac ◽  
Jerome Hull ◽  
John C. Neilsen ◽  
Michael Schroeder ◽  
Georg Noga
Keyword(s):  
Total Yield ◽  
Fruit Size ◽  
Frost Damage ◽  
Fruit Growth ◽  
Soluble Solids ◽  
Seed Number ◽  
Crop Load ◽  
Fruit Thinning ◽  
Carpel Development ◽  
Return Bloom

NAA is used extensively for fruit thinning of apples to increase fruit size and to promote return bloom. In some cultivars, even if thinning is achieved, fruit size at harvest may be less than expected based on crop load. CPPU, N-(2-chloro-4-pyridinyl)-N.-phenylurea, has been shown to increase fruit growth in apples, grapes, and kiwi. We evaluated combinations of NAA and CPPU on thinning, fruit growth and return bloom in Redchief `Delicious', `Elstar', and `Gloster'. CPPU was applied at 5 mgμL–1 (based on 0 to 10 mgμL–1 response curve) in combination with 15 mgμL–1 NAA as high-volume sprays at 7 to 10 mm KFD. Yield and fruit size distribution (on total yield) were used as index of response. In `Delicious', CPPU (3-year study) increased % large (70 mm+) fruit, but in the presence of NAA % large fruit was reduced 2 of the 3 years. CPPU did not induce significant thinning. There were no significant effects on color or soluble solids; firmness was increased slightly and seed number reduced. The L/D ratio was increased and uneven lobe and carpel development was common. CPPU had no significant effect on return bloom in presence or absence of NAA, but NAA increased bloom in both the presence and absence of CPPU. With `Elstar' (2-year study) there was no significant thinning with either chemical, but CPPU increased mean fruit size and % large (70–80 mm) fruit over nonthinned, but not significantly greater than NAA alone. There were no significant differences in firmness, color, soluble solids or seed number. NAA + CPPU did not inhibit fruit growth or cause excessive uneven carpel development. Frost damage reduced crop load in `Gloster' where results were similar to `Elstar' except seed number was reduced by the NAA + CPPU combination.

Climate-induced treeline mortality during the termination of the Little Ice Age in the Greater Yellowstone Ecoregion, USA

The Holocene ◽  
2021 ◽  
pp. 095968362110116
Author(s):  
Maegen L Rochner ◽  
Karen J Heeter ◽  
Grant L Harley ◽  
Matthew F Bekker ◽  
Sally P Horn
Keyword(s):  
Climate Change ◽  
Tree Ring ◽  
Little Ice Age ◽  
Climate Changes ◽  
Frost Damage ◽  
Ice Age ◽  
Spatial And Temporal Variability ◽  
Whitebark Pine ◽  
Engelmann Spruce ◽  
Greater Yellowstone

Paleoclimate reconstructions for the western US show spatial variability in the timing, duration, and magnitude of climate changes within the Medieval Climate Anomaly (MCA, ca. 900–1350 CE) and Little Ice Age (LIA, ca. 1350–1850 CE), indicating that additional data are needed to more completely characterize late-Holocene climate change in the region. Here, we use dendrochronology to investigate how climate changes during the MCA and LIA affected a treeline, whitebark pine ( Pinus albicaulis Engelm.) ecosystem in the Greater Yellowstone Ecoregion (GYE). We present two new millennial-length tree-ring chronologies and multiple lines of tree-ring evidence from living and remnant whitebark pine and Engelmann spruce ( Picea engelmannii Parry ex. Engelm.) trees, including patterns of establishment and mortality; changes in tree growth; frost rings; and blue-intensity-based, reconstructed summer temperatures, to highlight the terminus of the LIA as one of the coldest periods of the last millennium for the GYE. Patterns of tree establishment and mortality indicate conditions favorable to recruitment during the latter half of the MCA and climate-induced mortality of trees during the middle-to-late LIA. These patterns correspond with decreased growth, frost damage, and reconstructed cooler temperature anomalies for the 1800–1850 CE period. Results provide important insight into how past climate change affected important GYE ecosystems and highlight the value of using multiple lines of proxy evidence, along with climate reconstructions of high spatial resolution, to better describe spatial and temporal variability in MCA and LIA climate and the ecological influence of climate change.

scholarly journals Component Modification of Basic Oxygen Furnace Slag with C4AF as Target Mineral and Application

2021 ◽  
Vol 13 (12) ◽  
pp. 6536
Author(s):  
Yanrong Zhao ◽  
Pengliang Sun ◽  
Ping Chen ◽  
Xiaomin Guan ◽  
Yuanhao Wang ◽  
...  
Keyword(s):  
Intermediate Phase ◽  
Raw Materials ◽  
Activity Index ◽  
Basic Oxygen Furnace ◽  
Hydration Products ◽  
Basic Oxygen ◽  
Bof Slag ◽  
Mineral Compositions ◽  
Slag Component ◽  
Basic Oxygen Furnace Slag

In this paper, a new method of basic oxygen furnace (BOF) slag component modification with a regulator was studied. The main mineral was designed as C4AF, C2S and C3S in modified BOF slag, and the batching method, mineral compositions, hydration rate, activation index and capability of resisting sulfate corrode also were studied. XRD, BEI and EDS were used to characterize the mineral formation, and SEM was used to study the morphology of hydration products. The results show that most inert phase in BOF slag can be converted into active minerals of C4AF and C2S through reasonable batching calculation and the amount of regulating agent. The formation of C4AF and C2S in modified BOF slag is better, and a small amount of MgO is embedded in the white intermediate phase, but C3S is not detected. With the increase in the CaO/SiO2 ratio in raw materials, the CaO/SiO2 ratio of calcium silicate minerals in modified BOF slag increases, the contents of f-CaO are less than 1.0%, and the activity index improves. Compared with the BOF slag, the activity index and exothermic rate of modified BOF slag improved obviously, and the activity index of 90 days is close to 100%. With the increase in modified BOF slag B cement, the flexural strength decrease; however, the capability of resisting sulfate corrode is improved due to the constant formation of a short rod-like shape ettringite in Na2SO4 solution and the improvement of the structure densification of the hydration products.

scholarly journals Effect of C-S-H Nucleating Agent on Cement Hydration

2021 ◽  
Vol 11 (14) ◽  
pp. 6638
Author(s):  
Wenhao Zhao ◽  
Xuping Ji ◽  
Yaqing Jiang ◽  
Tinghong Pan
Keyword(s):  
Fractal Dimension ◽  
Cement Hydration ◽  
Nucleating Agent ◽  
Crystal Nucleation ◽  
Enhancement Effect ◽  
Hydration Products ◽  
Hydration Degree ◽  
Hydration Kinetics ◽  
Cement Mortars ◽  
Early Strength

This work aims to study the effect of a nucleating agent on cement hydration. Firstly, the C-S-H crystal nucleation early strength agent (CNA) is prepared. Then, the effects of CNA on cement hydration mechanism, early strength enhancement effect, C-S-H content, 28-days hydration degree and 28-days fractal dimension of hydration products are studied by hydration kinetics calculation, resistivity test, BET specific surface area test and quantitative analysis of backscattered electron (BSE) images, respectively. The results show that CNA significantly improves the hydration degree of cement mixture, which is better than triethanolamine (TEA). CNA shortens the beginning time of the induction period by 49.3 min and the end time of the cement hydration acceleration period by 105.1 min than the blank sample. CNA increases the fractal dimension of hydration products, while TEA decreases the fractal dimension. CNA significantly improves the early strength of cement mortars; the 1-day and 3-days strength of cement mortars with CNA are more than the 3-days and 7-days strength of the blank sample. These results will provide a reference for the practical application of the C-S-H nucleating agent.

scholarly journals Effect of a Nitrite/Nitrate-Based Accelerator on the Strength Development and Hydrate Formation in Cold-Weather Cementitious Materials

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1006
Author(s):  
Akira Yoneyama ◽  
Heesup Choi ◽  
Masumi Inoue ◽  
Jihoon Kim ◽  
Myungkwan Lim ◽  
...  
Keyword(s):  
Calcium Nitrate ◽  
Hydrate Formation ◽  
Frost Damage ◽  
Cementitious Materials ◽  
Heat Of Hydration ◽  
Cold Weather ◽  
Strength Development ◽  
Hardened Cement ◽  
Tricalcium Aluminate ◽  
Nitrite Nitrate

Recently, there has been increased use of calcium-nitrite and calcium-nitrate as the main components of chloride- and alkali-free anti-freezing agents to promote concrete hydration in cold weather concreting. As the amount of nitrite/nitrate-based accelerators increases, the hydration of tricalcium aluminate (C3A phase) and tricalcium silicate (C3S phase) in cement is accelerated, thereby improving the early strength of cement and effectively preventing initial frost damage. Nitrite/nitrate-based accelerators are used in larger amounts than usual in low temperature areas below −10 °C. However, the correlation between the hydration process and strength development in concrete containing considerable nitrite/nitrate-based accelerators remains to be clearly identified. In this study, the hydrate composition (via X-ray diffraction and nuclear magnetic resonance), pore structures (via mercury intrusion porosimetry), and crystal form (via scanning electron microscopy) were determined, and investigations were performed to elucidate the effect of nitrite/nitrate-based accelerators on the initial strength development and hydrate formation of cement. Nitrite/nitrate-AFm (aluminate-ferret-monosulfate; AFm) was produced in addition to ettringite at the initial stage of hydration of cement by adding a nitrite/nitrate-based accelerator. The amount of the hydrates was attributed to an increase in the absolute amounts of NO2− and NO3− ions reacting with Al2O3 in the tricalcium aluminate (C3A phase). Further, by effectively filling the pores, it greatly contributed to the enhancement of the strength of the hardened cement product, and the degree of the contribution tended to increase with the amount of addition. On the other hand, in addition to the occurrence of cracks due to the release of a large amount of heat of hydration, the amount of expansion and contraction may increase, and it is considered necessary to adjust the amount used for each concrete work.

scholarly journals Regulating Effect of Cement Accelerator on High Content Solid-Wastes Autoclaved Aerated Concrete (HCS-AAC) Slurry Performance and Subsequent Influence

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 799
Author(s):  
Dingkun Xie ◽  
Lixiong Cai ◽  
Jie Wang
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Solid Wastes ◽  
Hydration Products ◽  
Promoting Effect ◽  
Adverse Side Effects ◽  
Foaming Process ◽  
Carbide Slag ◽  
Negative Effect ◽  
Aerated Concrete

Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile, the affiliated effects on the physical-mechanical properties and hydration products were discussed to evaluate the applicability and influence of the cement accelerator. The hydration products were characterized by mineralogical (XRD) and thermal analysis (DSC-TG). The results indicated that substituting carbide slag for quicklime retarded slurry foaming and curing progress; meanwhile, the induced mechanical property declination had a negative effect on the generation of C–S–H (I) and tobermorite. Na2SO4 and Na2O·2.0SiO2 can effectively accelerate the slurry foaming rate, but the promoting effect on slurry thickening was inconspicuous. The compressive strength of HCS-AAC obviously declined with increasing cement coagulant content, which was mainly ascribed to the decrease in bulk density caused by the accelerating effect on the slurry foaming process. Dosing Na2SO4 under 0.4% has little effect on the generation of strength contributing to hydration products while the addition of Na2O·2.0SiO2 can accelerate the generation and crystallization of C–S–H, which contributed to the high activity gelatinous SiO2 generated from the reaction between Na2O·2.0SiO2 and Ca(OH)2.

New Harvesting and Curing Techniques in the Production of Breeder's Seed Peanuts1

1979 ◽  
Vol 6 (2) ◽  
pp. 70-72
Author(s):  
T. A. Coffelt ◽  
F. S. Wright ◽  
J. L. Steele
Keyword(s):  
Large Scale ◽  
Combine Method ◽  
Frost Damage ◽  
New Method ◽  
Experimental Equipment ◽  
Harvesting Method ◽  
Curing Methods ◽  
Labor Requirements ◽  
High Level ◽  
Varietal Purity

Abstract A new method of harvesting and curing breeder's seed peanuts in Virginia was initiated that would 1) reduce the labor requirements, 2) maintain a high level of germination, 3) maintain varietal purity at 100%, and 4) reduce the risk of frost damage. Three possible harvesting and curing methods were studied. The traditional stack-pole method satisfied the latter 3 objectives, but not the first. The windrow-combine method satisfied the first 2 objectives, but not the last 2. The direct harvesting method satisfied all four objectives. The experimental equipment and curing procedures for direct harvesting had been developed but not tested on a large scale for seed harvesting. This method has been used in Virginia to produce breeder's seed of 3 peanut varieties (Florigiant, VA 72R and VA 61R) during five years. Compared to the stackpole method, labor requirements have been reduced, satisfactory levels of germination and varietal purity have been obtained, and the risk of frost damage has been minimized.

Sign in / Sign up

Export Citation Format

Share Document