scholarly journals Fabrication of Hollow Core-Shell Type Si/C Nanocomposites by a Simple Process

2017 ◽  
Vol 15 (0) ◽  
pp. 69-73 ◽  
Author(s):  
Kei Wakabayashi ◽  
Daichi Yamaura ◽  
Kazuki Ito ◽  
Naoya Kameda ◽  
Toshio Ogino
Keyword(s):  
Core Shell ◽  
Hollow Core ◽  
Simple Process ◽  
Shell Type

Core-Shell Molecularly Imprinted Polymer Nanocomposites for Biomedical and Environmental Applications

2019 ◽  
Vol 25 (34) ◽  
pp. 3633-3644
Author(s):  
Nasrullah Shah ◽  
Saba Gul ◽  
Mazhar Ul-Islam
Keyword(s):  
Food Processing ◽  
Selective Adsorption ◽  
Environmental Applications ◽  
Core Shell ◽  
Template Molecule ◽  
Hollow Core ◽  
Imprinted Polymer ◽  
Adsorption Selectivity ◽  
Molecularly Imprinting Polymers ◽  
Relative Adsorption

: Core-shell polymers represent a class of composite particles comprising of minimum two dissimilar constituents, one at the center known as a core which is occupied by the other called shell. Core-shell molecularly imprinting polymers (CSMIPs) are composites prepared via printing a template molecule (analyte) in the coreshell assembly followed by their elimination to provide the everlasting cavities specific to the template molecules. Various other types of CSMIPs with a partial shell, hollow-core and empty-shell are also prepared. Numerous methods have been reported for synthesizing the CSMIPs. CSMIPs composites could develop the ability to identify template molecules, increase the relative adsorption selectivity and offer higher adsorption capacity. Keen features are measured that permits these polymers to be utilized in numerous applications. It has been developed as a modern technique with the probability for an extensive range of uses in selective adsorption, biomedical fields, food processing, environmental applications, in utilizing the plant's extracts for further applications, and sensors. This review covers the approaches of developing the CSMIPs synthetic schemes, and their application with special emphasis on uses in the biomedical field, food care subjects, plant extracts analysis and in environmental studies.

Hollow core-shell CoNi@C and CoNi@NC composites as high-performance microwave absorbers

2021 ◽  
pp. 159574
Author(s):  
Zhongjing Shen ◽  
Huili Yang ◽  
Zhiqiang Xiong ◽  
Yu Xie ◽  
Chongbo Liu
Keyword(s):  
High Performance ◽  
Core Shell ◽  
Hollow Core ◽  
Microwave Absorbers

scholarly journals CdSe/ZnS Core-Shell-Type Quantum Dot Nanoparticles Disrupt the Cellular Homeostasis in Cellular Blood–Brain Barrier Models

2021 ◽  
Vol 22 (3) ◽  
pp. 1068
Author(s):  
Katarzyna Dominika Kania ◽  
Waldemar Wagner ◽  
Łukasz Pułaski
Keyword(s):  
Gene Expression ◽  
Quantum Dot ◽  
Blood Brain Barrier ◽  
Protein Gene ◽  
Brain Barrier ◽  
Core Shell ◽  
Cellular Homeostasis ◽  
Blood Brain ◽  
Shell Type ◽  
The Impact

Two immortalized brain microvascular endothelial cell lines (hCMEC/D3 and RBE4, of human and rat origin, respectively) were applied as an in vitro model of cellular elements of the blood–brain barrier in a nanotoxicological study. We evaluated the impact of CdSe/ZnS core-shell-type quantum dot nanoparticles on cellular homeostasis, using gold nanoparticles as a largely bioorthogonal control. While the investigated nanoparticles had surprisingly negligible acute cytotoxicity in the evaluated models, a multi-faceted study of barrier-related phenotypes and cell condition revealed a complex pattern of homeostasis disruption. Interestingly, some features of the paracellular barrier phenotype (transendothelial electrical resistance, tight junction protein gene expression) were improved by exposure to nanoparticles in a potential hormetic mechanism. However, mitochondrial potential and antioxidant defences largely collapsed under these conditions, paralleled by a strong pro-apoptotic shift in a significant proportion of cells (evidenced by apoptotic protein gene expression, chromosomal DNA fragmentation, and membrane phosphatidylserine exposure). Taken together, our results suggest a reactive oxygen species-mediated cellular mechanism of blood–brain barrier damage by quantum dots, which may be toxicologically significant in the face of increasing human exposure to this type of nanoparticles, both intended (in medical applications) and more often unintended (from consumer goods-derived environmental pollution).

NiO@NiO and NiO@Co3O4 Hollow Core/Shell Composites for High-Performance Supercapacitor Electrodes

2019 ◽  
Vol 19 (12) ◽  
pp. 7785-7789 ◽  
Author(s):  
Meiqing Fan ◽  
Bo Ren ◽  
Xiaodong Yang ◽  
Haixia Yu ◽  
Lei Wang
Keyword(s):  
High Performance ◽  
Core Shell ◽  
Hollow Core

scholarly journals Effect of Core-Shell Ag@TiO2Volume Ratio on Characteristics of TiO2-Based DSSCs

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Ho Chang ◽  
Chih-Hao Chen ◽  
Mu-Jung Kao ◽  
Hsin-Han Hsiao
Keyword(s):  
Conversion Efficiency ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Open Circuit ◽  
Photoelectric Conversion Efficiency ◽  
Core Shell ◽  
Photoelectric Conversion ◽  
Shell Type ◽  
Degussa P25 ◽  
Triton X

This paper aims to develop photoanode material required by dye-sensitized solar cells. The material prepared is in the form of Ag@TiO2core-shell-type nanocomposites. This material is used to replace the titanium oxide powder commonly used in general DSSCs. The prepared Ag@TiO2core-shell-type nanocomposites are mixed with Degussa P25 TiO2in different proportions. Triton X-100 is added and polyethylene glycol (PEG) at 20 wt% is used as a polymer additive. This study tests the particle size and material properties of Ag@TiO2core-shell-type nanocomposites and measures the photoelectric conversion efficiency and IPCE of DSSCs. Experimental results show that the DSSC prepared by Ag@TiO2core-shell-type nanocomposites can achieve a photoelectric conversion efficiency of 3.67%. When Ag@TiO2core-shell-type nanocomposites are mixed with P25 nanoparticles in specific proportions, and when the thickness of the photoelectrode thin film is 28 μm, the photoelectric conversion efficiency can reach 6.06%, with a fill factor of 0.52, open-circuit voltage of 0.64V, and short-circuit density of 18.22 mAcm−2. Compared to the DSSC prepared by P25 TiO2only, the photoelectric conversion efficiency can be raised by 38% under the proposed approach.

Effect of Metal Gradient In Nano Wall of Stratified Type Photocatalyst

2009 ◽  
Vol 631-632 ◽  
pp. 339-344
Author(s):  
Tsugumi Hayashi ◽  
Yohei Baba ◽  
Toshiharu Taga ◽  
Shun Yokoyama ◽  
Hiroaki Suzuki ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Detailed Analysis ◽  
Crystalline Structure ◽  
Visible Light Irradiation ◽  
High Photocatalytic Activity ◽  
Core Shell ◽  
Shell Type ◽  
Metal Element ◽  
Egg Shell

Objective of study was the development of core-shell type ZnS-CdS photocatalyst with the stratified morphology. To form the stratified morphology, condition of the precursor is extremely important. For this purpose, three types of precursors, thus core-shell type, egg-shell type and uniform type, was tried to synthesize by utilizing the results of the calculation. The size of the synthesized precursor particles was about 40-100 nm. Main phase of the particle was gradually changed from ZnO (pH8.0) to Cd(OH)2 (pH9.5). Detailed analysis of the synthesized precursor was clearly demonstrated that these have the crystalline structure and each metal element was co-existed in one particle. Therefore, it could be concluded that core-shell type or uniform type precursor was successfully synthesized. Core-shell type ZnS-CdS stratified photocatalyst could be successfully synthesized by sulfurization for 1h, and it shows the high photocatalytic activity under visible light irradiation.

scholarly journals Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder

2017 ◽  
Vol 62 (2) ◽  
pp. 1263-1266 ◽  
Author(s):  
M.-W. Lee ◽  
K.-H. Bae ◽  
S.-R. Lee ◽  
H.-J. Kim ◽  
T.-S. Jang
Keyword(s):  
Grain Boundary ◽  
Diffusion Path ◽  
Boundary Phase ◽  
Core Shell ◽  
Phase Layer ◽  
Sintered Magnets ◽  
The Core ◽  
Shell Type ◽  
Property Changes ◽  
And Diffusion

AbstractWe investigated the microstructural and magnetic property changes of DyCo, Cu + DyCo, and Al + DyCo diffusion-treated NdFeB sintered magnets. The coercivity of all diffusion treated magnet was increased at 880ºC of 1stpost annealing(PA), by 6.1 kOe in Cu and 7.0 kOe in Al mixed DyCo coated magnets, whereas this increment was found to be relatively low (3.9 kOe) in the magnet coated with DyCo only. The diffusivity and diffusion depth of Dy were increased in those magnets which were treated with Cu or Al mixed DyCo, mainly due to comparatively easy diffusion path provided by Cu and Al because of their solubility with Ndrich grain boundary phase. The formation of Cu/Al-rich grain boundary phase might have enhanced the diffusivity of Dy-atoms. Moreover, relatively a large number of Dy atoms reached into the magnet and mostly segregated at the interface of Nd2Fe14B and grain boundary phases covering Nd2Fe14B grains so that the core-shell type structures were developed. The formation of highly anisotropic (Nd, Dy)2Fe14B phase layer, which acted as the shell in the core-shell type structure so as to prevent the reverse domain movement, was the cause of enhancing the coercivity of diffusion treated NdFeB magnets. Segregation of cobalt in Nd-rich TJP followed by the formation of Co-rich phase was beneficial for the coercivity enhancement, resulting in the stabilization of the metastable c-Nd2O3phase.

Sign in / Sign up

Export Citation Format

Share Document