scholarly journals Silicon Photonic Chip for Dynamic Wavelength Division Multiplexed FBG Sensors Interrogation

Author(s):  
Y. Marin ◽  
A. Celik ◽  
S. Faralli ◽  
L. Adelmini ◽  
C. Kopp ◽  
...  
2014 ◽  
Vol 22 (7) ◽  
pp. 8205 ◽  
Author(s):  
Ryan Aguinaldo ◽  
Alex Forencich ◽  
Christopher DeRose ◽  
Anthony Lentine ◽  
Douglas C. Trotter ◽  
...  

2020 ◽  
Author(s):  
Anthony Rizzo ◽  
Qixiang Cheng ◽  
Stuart Daudlin ◽  
Keren Bergman

We demonstrate an ultra-broadband silicon photonic interleaver capable of interleaving and de-interleaving frequency comb lines over a 125 nm bandwidth in the extended C- and L-bands. We use a ring-assisted asymmetric Mach Zehnder interferometer to achieve a flat-top passband response while maintaining a compact device footprint. The device has a 400 GHz free spectral range to divide an optical frequency comb with 200 GHz channel spacing into two output groups, each with a channel spacing of 400 GHz, yielding a potential capacity of 78 total wavelength-division multiplexed channels between 1525 nm and 1650 nm. This device represents an important step towards realizing highly parallel integrated optical links with broadband frequency comb sources within the silicon photonics platform.


2019 ◽  
Vol 37 (18) ◽  
pp. 4770-4775 ◽  
Author(s):  
Yisbel E. Marin ◽  
Arda Celik ◽  
Stefano Faralli ◽  
Laetitia Adelmini ◽  
Christophe Kopp ◽  
...  

2022 ◽  
Author(s):  
Shayan Mookherjee

This was a project under the Thrust 2 “Subsystem Integration and Silicon Nanophotonics” of the NSF-funded Center. The goal of this research was to design, fabricate and test microchip-scale silicon photonic components for optical WDM (wavelength division multiplexed) add/drop functionality in access and data networks. This chip was intended for use in a campus ring network.


2020 ◽  
Author(s):  
Janis Braunfelds ◽  
Sandis Spolitis ◽  
Jurgis Porins ◽  
Vjaceslavs Bobrovs

Fiber Bragg grating (FBG) sensors are a progressive passive optical components, and used for temperature, strain, water level, humidity, etc. monitoring. FBG sensors network can be integrated into existing optical fiber network infrastructure and realized structural health monitoring of roads, bridges, buildings, etc. In this chapter, the FBG sensor network integration in a single-channel and multi-channel spectrum sliced wavelength division multiplexed passive optical network (SS-WDM-PON) is presented and assessed. The operation of both the sensors and data transmission system, over a shared optical distribution network (ODN), is a challenging task and should be evaluated to provide stable, high-performance mixed systems in the future. Therefore, we have investigated the influence of FBG temperature sensors on 10 Gbit/s non-return-to-zero on–off keying (NRZ-OOK) modulated data channels optical transmission system. Results show that the crosstalk between both systems is negligible. The successful operation of both systems (with BER < 2 × 10−3 for communication system) can be achieved over ODN distances up to 40 km.


2022 ◽  
Author(s):  
Shayan Mookherjee

The goal of this project was to design silicon photonic components for optical WDM (wavelength division multiplexed) add/drop functionality in access and data networks. One of the key functionalities that was required by the campus networking testbed was to control the optical power levels in the WDM network of each channel without requiring separate components. This was most easily achieved by integrating the Variable Optical Attenuator (VOA) functionality together with the add-drop functionality on the same photonic chips.


2020 ◽  
Author(s):  
Anthony Rizzo ◽  
Qixiang Cheng ◽  
Stuart Daudlin ◽  
Keren Bergman

We demonstrate an ultra-broadband silicon photonic interleaver capable of interleaving and de-interleaving frequency comb lines over a 125 nm bandwidth in the extended C- and L-bands. We use a ring-assisted asymmetric Mach Zehnder interferometer to achieve a flat-top passband response while maintaining a compact device footprint. The device has a 400 GHz free spectral range to divide an optical frequency comb with 200 GHz channel spacing into two output groups, each with a channel spacing of 400 GHz, yielding a potential capacity of 78 total wavelength-division multiplexed channels between 1525 nm and 1650 nm. This device represents an important step towards realizing highly parallel integrated optical links with broadband frequency comb sources within the silicon photonics platform.


Sign in / Sign up

Export Citation Format

Share Document