scholarly journals Refractive-index-modified-dot Fabry-Perot fiber probe fabricated by femtosecond laser for high-temperature sensing

2018 ◽  
Vol 26 (5) ◽  
pp. 5292 ◽  
Author(s):  
Pengcheng Chen ◽  
Xuewen Shu
Keyword(s):  
Refractive Index ◽  
High Temperature ◽  
Femtosecond Laser ◽  
Temperature Sensing ◽  
Fiber Probe ◽  
Fabry Perot

scholarly journals Simultaneous Measurement of Temperature and Refractive Index Using High Temperature Resistant Pure Quartz Grating Based on Femtosecond Laser and HF Etching

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1028
Author(s):  
Na Zhao ◽  
Qijing Lin ◽  
Kun Yao ◽  
Fuzheng Zhang ◽  
Bian Tian ◽  
...  
Keyword(s):  
Refractive Index ◽  
High Temperature ◽  
Femtosecond Laser ◽  
Optical Fiber ◽  
Temperature Response ◽  
High Sensitivity ◽  
Xrd Analysis ◽  
Refractive Index Sensor ◽  
Compact Structure ◽  
Fluid Analysis

The optical fiber temperature and refractive index sensor combined with the hollow needle structure for medical treatment can promote the standardization of traditional acupuncture techniques and improve the accuracy of body fluid analysis. A double-parameter sensor based on fiber Bragg grating (FBG) is developed in this paper. The sensor materials are selected through X-ray diffraction (XRD) analysis, and the sensor sensing principle is theoretically analyzed and simulated. Through femtosecond laser writing pure silica fiber, a high temperature resistant wavelength type FBG temperature sensor is obtained, and the FBG is corroded by hydrofluoric acid (HF) to realize a high-sensitivity intensity-type refractive index sensor. Because the light has dual characteristics of energy and wavelength, the sensor can realize simultaneous dual-parameter sensing. The light from the lead-in optical fiber is transmitted to the sensor and affected by temperature and refractive-index; then, the reflection peak is reflected back to the lead-out fiber by the FBG. The high temperature response and the refractive index response of the sensor were measured in the laboratory, and the high temperature characteristics of the sensor were verified in the accredited institute. It is demonstrated that the proposed sensor can achieve temperature sensing up to 1150 °C with the sensitivity of 0.0134 nm/°C, and refractive sensing over a refractive range of 1.333 to 1.4027 with the sensitivity of −49.044 dBm/RIU. The sensor features the advantages of two-parameter measurement, compact structure, and wide temperature range, and it exhibits great potential in acupuncture treatment.

Radiation-resistant optical fiber Fabry-Perot interferometer used for high-temperature sensing

2020 ◽  
pp. 1-1
Author(s):  
Dajuan Lyu ◽  
Jiankun Peng ◽  
Qing Huang ◽  
Wei Zheng ◽  
Liangming Xiong ◽  
...  
Keyword(s):  
High Temperature ◽  
Optical Fiber ◽  
Temperature Sensing ◽  
Fabry Perot ◽  
Radiation Resistant

scholarly journals Sapphire-Derived Fiber Bragg Gratings for High Temperature Sensing

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 946
Author(s):  
Qi Guo ◽  
Zhixu Jia ◽  
Xuepeng Pan ◽  
Shanren Liu ◽  
Zhennan Tian ◽  
...  
Keyword(s):  
Refractive Index ◽  
High Temperature ◽  
Spectral Characteristics ◽  
Fiber Bragg Gratings ◽  
Single Mode ◽  
Bragg Gratings ◽  
Temperature Sensing ◽  
Direct Writing ◽  
Core Diameter ◽  
Application Range

In this paper, a sapphire-derived fiber (SDF) with a core diameter of 10 μm and a cladding diameter of 125 μm is fabricated by the melt-in-tube method, and fiber Bragg gratings (FBGs) with reflectivity over 80% are prepared by the femtosecond laser point-by-point direct writing method. By analyzing the refractive index distribution and reflection spectral characteristics of the SDF, it can be seen that the SDF is a graded refractive index few-mode fiber. In order to study the element composition of the SDF core, the end-face element distribution of the SDF is analyzed, which indicates that element diffusion occurred between the core and the cladding materials. The temperature and stress of the SDF gratings are measured and the highest temperature is tested to 1000 °C. The temperature and strain sensitivities are 15.64 pm/°C and 1.33 pm/με, respectively, which are higher than the temperature sensitivity of the quartz single-mode fiber. As a kind of special fiber, the SDF expands the application range of sapphire fiber, and has important applications in the fields of high-temperature sensing and high-power lasers.

Sign in / Sign up

Export Citation Format

Share Document