scholarly journals Study of a low-cost trimodal polymer waveguide for interferometric optical biosensors

2015 ◽  
Vol 23 (9) ◽  
pp. 11985 ◽  
Author(s):  
Jhonattan C. Ramirez ◽  
Laura M. Lechuga ◽  
Lucas H. Gabrielli ◽  
Hugo E. Hernandez-Figueroa
Sensors ◽  
2020 ◽  
Vol 20 (10) ◽  
pp. 2889 ◽  
Author(s):  
Johanna-Gabriela Walter ◽  
Alina Eilers ◽  
Lourdes Alwis ◽  
Bernhard Roth ◽  
Kort Bremer

We present a surface plasmon resonance (SPR) biosensor that is based on a planar-optical multi-mode (MM) polymer waveguide structure applied for the detection of biomolecules in the lower nano-molar (nM) range. The basic sensor shows a sensitivity of 608.6 nm/RIU when exposed to refractive index changes with a measurement resolution of 4.3 × 10−3 RIU. By combining the SPR sensor with an aptamer-functionalized, gold-nanoparticle (AuNP)-enhanced sandwich assay, the detection of C-reactive protein (CRP) in a buffer solution was achieved with a response of 0.118 nm/nM. Due to the multi-mode polymer waveguide structure and the simple concept, the reported biosensor is well suited for low-cost disposable lab-on-a-chip applications and can be used with rather simple and economic devices. In particular, the sensor offers the potential for fast and multiplexed detection of several biomarkers on a single integrated platform.


Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2821 ◽  
Author(s):  
Jhonattan C. Ramirez ◽  
Lucas H. Gabrielli ◽  
Laura M. Lechuga ◽  
Hugo E. Hernandez-Figueroa

This work implements and demonstrates an interferometric transducer based on a trimodal optical waveguide concept. The readout signal is generated from the interference between the fundamental and second-order modes propagating on a straight polymer waveguide. Intuitively, the higher the mode order, the larger the fraction of power (evanescent field) propagating outside the waveguide core, hence the higher the sensitivity that can be achieved when interfering against the strongly confined fundamental mode. The device is fabricated using the polymer SU-8 over a SiO2 substrate and shows a free spectral range of 20.2 nm and signal visibility of 5.7 dB, reaching a sensitivity to temperature variations of 0.0586 dB/ ∘ C. The results indicate that the proposed interferometer is a promising candidate for highly sensitive, compact and low-cost photonic transducer for implementation in different types of sensing applications, among these, point-of-care.


Author(s):  
Takara Sugimoto ◽  
Takanori Shimizu ◽  
Yuji Akimoto ◽  
Masataka Noguchi ◽  
Jun'etsu Sone ◽  
...  

2020 ◽  
Vol 10 (4) ◽  
pp. 353-363
Author(s):  
Lanting Ji ◽  
Shuqing Yang ◽  
Rongna Shi ◽  
Yujie Fu ◽  
Juan Su ◽  
...  

Abstract A waveguide coupled surface plasmon sensor for detection of liquid with high refractive index (RI) is designed based on polymer materials. The effects of variation of the thickness of the Au film, polymethyl methacrylate (PMMA) buffer, and waveguide layer on the sensing performance of the waveguide are comprehensively investigated by using the finite difference method. Numerical simulations show that a thinner gold film gives rise to a more sensitive structure, while the variation of the thickness of the PMMA buffer and waveguide layer has a little effect on the sensitivity. For liquid with high RI, the sensitivity of the sensor increases significantly. When RI of liquid to be measured increases from 1.45 to 1.52, the sensitivity is as high as 4518.14nm/RIU, and a high figure of merit of 114.07 is obtained. The waveguide coupled surface plasmon RI sensor shows potential applications in the fields of environment, industry, and agriculture sensing with the merits of compact size, low cost, and high integration density.


2012 ◽  
Author(s):  
M. E. Pollard ◽  
S. J. Pearce ◽  
R. Chen ◽  
S. Oo ◽  
M. D. B. Charlton

2020 ◽  
Author(s):  
Lanting Ji ◽  
Wei Wei ◽  
Gang Li ◽  
Shuqing Yang ◽  
Yujie Fu ◽  
...  

Abstract A metal-clad planar polymer waveguide refractive index sensor based on epoxy (EPO) polymer materials by using light intensity interrogation at 850 nm is designed. The polymethyl methacrylate (PMMA) material is deployed as the low refractive index (RI) buffer layer in order to better couple the optical guided mode and the surface plasmon polaritons (SPP) mode for working in water environment. The effects of the gold film thickness, PMMA buffer layer thickness, waveguide layer thickness, waveguide width, and gold length on the sensor sensing characteristics have been comprehensively studied. Simulation results demonstrate that the normalized transmission increases quasi-linearly with the increment of RI of the analyte from 1.33 to 1.46. The sensitivity is 491.5 dB/RIU, corresponding to a high RI resolution of 2.6×10−9 RIU. The designed SPP-based optical waveguide sensor is low-cost, wide-range, and high-precision, and has a broad application prospect in biochemical sensing with merits of miniaturization, flexibility, and multiplexing.


Foods ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 88
Author(s):  
Aristeidis S. Tsagkaris ◽  
Jana Pulkrabova ◽  
Jana Hajslova

Pesticides have been extensively used in agriculture to protect crops and enhance their yields, indicating the need to monitor for their toxic residues in foodstuff. To achieve that, chromatographic methods coupled to mass spectrometry is the common analytical approach, combining low limits of detection, wide linear ranges, and high accuracy. However, these methods are also quite expensive, time-consuming, and require highly skilled personnel, indicating the need to seek for alternatives providing simple, low-cost, rapid, and on-site results. In this study, we critically review the available screening methods for pesticide residues on the basis of optical detection during the period 2016–2020. Optical biosensors are commonly miniaturized analytical platforms introducing the point-of-care (POC) era in the field. Various optical detection principles have been utilized, namely, colorimetry, fluorescence (FL), surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). Nanomaterials can significantly enhance optical detection performance and handheld platforms, for example, handheld SERS devices can revolutionize testing. The hyphenation of optical assays to smartphones is also underlined as it enables unprecedented features such as one-click results using smartphone apps or online result communication. All in all, despite being in an early stage facing several challenges, i.e., long sample preparation protocols or interphone variation results, such POC diagnostics pave a new road into the food safety field in which analysis cost will be reduced and a more intensive testing will be achieved.


Sign in / Sign up

Export Citation Format

Share Document