scholarly journals Differential optical-path approach to improve signal-to-noise ratio of pulsed-laser range finding

2014 ◽  
Vol 22 (1) ◽  
pp. 563 ◽  
Author(s):  
Qun Hao ◽  
Jie Cao ◽  
Yao Hu ◽  
Yunyi Yang ◽  
Kun Li ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Pulsed Laser ◽  
Optical Path ◽  
Signal To Noise ◽  
Laser Range ◽  
Range Finding ◽  
Noise Ratio

Three-Dimensional Optical Bit Memory in Sm(DBM)3Phen-Doped and Un-Doped Poly(methyl methacrylate)

2011 ◽  
Vol 284-286 ◽  
pp. 2251-2254
Author(s):  
Zhao Gang Nie ◽  
Xin Zhong Li ◽  
Yu Ping Tai ◽  
Ki Soo Lim ◽  
Myeongkyu Lee
Keyword(s):  
Refractive Index ◽  
Methyl Methacrylate ◽  
Signal To Noise Ratio ◽  
Three Dimensional ◽  
Pulsed Laser ◽  
High Signal ◽  
Signal To Noise ◽  
Fluorescent Signal ◽  
Poly Methyl Methacrylate ◽  
Noise Ratio

The feasibility of three-dimensional optical bit memory is demonstrated by using the change of fluorescence and refractive index in Sm(DBM)3Phen-doped and un-doped Poly(methyl methacrylate). After a femtosecond pulsed laser irradiation, a refractive-index bit and a fluorescent bit can be formed at the same position inside the bulk sample. Multilayer patterns recorded by tightly focusing the pulsed laser beam were read out by a reflection-type fluorescent confocal microscope, which can detect the reflection signal and also the fluorescent signal of the stored bits. The signal-to-noise ratio via the two retrieval modes was compared as a function of recording depth. The stored bits were retrieved with a high signal-to-noise ratio in the absence of any crosstalk and the detection of the fluorescent signal enables retrieval of the stored bits with a higher S/N ratio.

Pulsed laser Doppler flowmetry for increased signal-to-noise ratio and probed depth

2003 ◽  
Author(s):  
Wiendelt Steenbergen ◽  
Roy G. M. Kolkman ◽  
Sven Woldberg ◽  
Frits F. M. de Mul
Keyword(s):  
Laser Doppler Flowmetry ◽  
Signal To Noise Ratio ◽  
Pulsed Laser ◽  
Laser Doppler ◽  
Signal To Noise ◽  
Doppler Flowmetry ◽  
Noise Ratio

Simulation of signal-to-noise ratio for the laser range-gated imaging system

2015 ◽  
Author(s):  
Weiwei Liang ◽  
Qianrong Chen ◽  
Yongwang Hao ◽  
Hao Guo ◽  
Wenpan Zhang
Keyword(s):  
Imaging System ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Laser Range ◽  
Noise Ratio ◽  
Gated Imaging

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Speech Reception in the Presence of Classroom Noise

1979 ◽  
Vol 10 (4) ◽  
pp. 221-230 ◽  
Author(s):  
Veronica Smyth
Keyword(s):  
Signal To Noise Ratio ◽  
Learning Processes ◽  
Speech Discrimination ◽  
Signal To Noise ◽  
Speech Reception ◽  
Monosyllabic Words ◽  
Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Sign in / Sign up

Export Citation Format

Share Document