scholarly journals Single mode fiber birefringence compensation in Sagnac and "plug & play" interferometric setups

2009 ◽  
Vol 17 (6) ◽  
pp. 4485 ◽  
Author(s):  
Jan Bogdanski ◽  
Johan Ahrens ◽  
Mohamed Bourennane
Keyword(s):  
Single Mode ◽  
Single Mode Fiber ◽  
Fiber Birefringence ◽  
Birefringence Compensation

scholarly journals Distributed Fiber Birefringence Measurement Using Pulse-Compression Φ-OTDR

2020 ◽  
Author(s):  
Yongxiang Chen ◽  
Yun Fu ◽  
Ji Xiong ◽  
Zinan Wang
Keyword(s):  
Spatial Resolution ◽  
Pulse Compression ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Time Domain Reflectometry ◽  
Coherent Detection ◽  
Compression Phase ◽  
Optical Time Domain Reflectometry ◽  
Fiber Birefringence ◽  
Optical Time

Abstract In this paper, a novel birefringence measurement method through the Rayleigh backscattered lightwave within single-mode fiber is proposed, using a single chirped-pulse with arbitrary state of polarization. Numerical analysis is carried out in detail, then pulse-compression phase-sensitive optical time domain reflectometry (PC-Φ-OTDR) with polarization-diverse coherent detection is employed to verify this method. A 2km spun single-mode fiber is tested with 8.6 cm spatial resolution, and the average birefringence of the fiber under test is measured as 0.234rad/m, which is consistent with previous literatures about single-mode fiber. Moreover, the relationship between the measured birefringence and the spatial resolution is also studied for the first time, and the results show that spatial resolution is crucial for fiber birefringence measurement.

Fiber Birefringence Measurement of Single-Mode Fiber by a Polarimetric Fiber Ring Laser

2018 ◽  
Vol 36 (11) ◽  
pp. 2204-2210 ◽  
Author(s):  
Xiujuan Yu ◽  
Xuefeng Chen ◽  
Jintao Zhang ◽  
Yachen Gao ◽  
Shengchun Liu
Keyword(s):  
Ring Laser ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Fiber Ring Laser ◽  
Fiber Ring ◽  
Fiber Birefringence

Performance and Reliability of a MEMS-based tunable optical filter operating in the 1565 nm-1525 nm wavelength range

2002 ◽  
Vol 722 ◽  
Author(s):  
T. S. Sriram ◽  
B. Strauss ◽  
S. Pappas ◽  
A. Baliga ◽  
A. Jean ◽  
...  
Keyword(s):  
Silicon Nitride ◽  
Line Width ◽  
Insertion Loss ◽  
Optical Filter ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Reliability Testing ◽  
Silicon Nitride Membrane ◽  
Tunable Optical Filter ◽  
Extensive Performance

AbstractThis paper describes the results of extensive performance and reliability characterization of a silicon-based surface micro-machined tunable optical filter. The device comprises a high-finesse Fabry-Perot etalon with one flat and one curved dielectric mirror. The curved mirror is mounted on an electrostatically actuated silicon nitride membrane tethered to the substrate using silicon nitride posts. A voltage applied to the membrane allows the device to be tuned by adjusting the length of the cavity. The device is coupled optically to an input and an output single mode fiber inside a hermetic package. Extensive performance characterization (over operating temperature range) was performed on the packaged device. Parameters characterized included tuning characteristics, insertion loss, filter line-width and side mode suppression ratio. Reliability testing was performed by subjecting the MEMS structure to a very large number of actuations at an elevated temperature both inside the package and on a test board. The MEMS structure was found to be extremely robust, running trillions of actuations without failures. Package level reliability testing conforming to Telcordia standards indicated that key device parameters including insertion loss, filter line-width and tuning characteristics did not change measurably over the duration of the test.

Anti-dark solitons in a single mode fiber laser

2021 ◽  
Vol 395 ◽  
pp. 127226
Author(s):  
Jun Guo ◽  
Xiao Hu ◽  
Jie Ma ◽  
Luming Zhao ◽  
Deyuan Shen ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Dark Solitons

scholarly journals Peta-bit-per-second optical communications system using a standard cladding diameter 15-mode fiber

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Georg Rademacher ◽  
Benjamin J. Puttnam ◽  
Ruben S. Luís ◽  
Tobias A. Eriksson ◽  
Nicolas K. Fontaine ◽  
...  
Keyword(s):  
Wavelength Division Multiplexing ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Capacity Limits ◽  
Wavelength Division ◽  
Core Networks ◽  
Space Division Multiplexing ◽  
Space Division ◽  
Data Rates ◽  
Multi Mode

AbstractData rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation.

scholarly journals Compact omnidirectional multicore fiber-based vector bending sensor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Josu Amorebieta ◽  
Angel Ortega-Gomez ◽  
Gaizka Durana ◽  
Rubén Fernández ◽  
Enrique Antonio-Lopez ◽  
...  
Keyword(s):  
Single Mode ◽  
High Accuracy ◽  
Single Mode Fiber ◽  
Wavelength Shift ◽  
Short Segment ◽  
Light Power ◽  
Highly Sensitive ◽  
Bending Sensor ◽  
Asymmetric Multicore ◽  
Multicore Fiber

AbstractWe propose and demonstrate a compact and simple vector bending sensor capable of distinguishing any direction and amplitude with high accuracy. The sensor consists of a short segment of asymmetric multicore fiber (MCF) fusion spliced to a standard single mode fiber. The reflection spectrum of such a structure shifts and shrinks in specific manners depending on the direction in which the MCF is bent. By monitoring simultaneously wavelength shift and light power variations, the amplitude and bend direction of the MCF can be unmistakably measured in any orientation, from 0° to 360°. The bending sensor proposed here is highly sensitive even for small bending angles (below 1°).

Sign in / Sign up

Export Citation Format

Share Document