Design and optimization method of a convex blazed grating in the Offner imaging spectrometer

2021 ◽  
Vol 60 (2) ◽  
pp. 383
Author(s):  
Zhencong Xiong ◽  
Wenjun He ◽  
Qi Wang ◽  
Zhiying Liu ◽  
Yuegang Fu ◽  
...  
Keyword(s):  
Optimization Method ◽  
Imaging Spectrometer ◽  
Blazed Grating ◽  
Design And Optimization

Design and optimization method for a two-dimensional hydrofoil

2006 ◽  
Vol 18 (S1) ◽  
pp. 316-322
Author(s):  
Ching-Yeh Hsin ◽  
Jia-Lin Wu ◽  
Sheng-Fong Chang
Keyword(s):  
Optimization Method ◽  
Two Dimensional ◽  
Design And Optimization

Parameter Design of Conformal PML Based on 2D Monostatic RCS Optimization

2021 ◽  
Vol 36 (6) ◽  
pp. 726-733
Author(s):  
Yongjie Zhang ◽  
Xiaofeng Deng
Keyword(s):  
Electromagnetic Scattering ◽  
Simulated Annealing Algorithm ◽  
Design Method ◽  
Optimization Method ◽  
Parameter Design ◽  
Design Parameters ◽  
Absorption Effect ◽  
Absorbing Boundary ◽  
Design And Optimization ◽  
Annealing Algorithm

In this study, 2D finite element (FE) solving process with the conformal perfectly matched layer (PML) is elucidated to perform the electromagnetic scattering computation. With the 2D monostatic RCS as the optimization objective, a sensitivity analysis of the basic design parameters of conformal PML (e.g., layer thickness, loss factor, extension order and layer number) is conducted to identify the major parameters of conformal PML that exerts more significant influence on 2D RCS. Lastly, the major design parameters of conformal PML are optimized by the simulated annealing algorithm (SA). As revealed from the numerical examples, the parameter design and optimization method of conformal PML based on SA is capable of enhancing the absorption effect exerted by the conformal PML and decreasing the error of the RCS calculation. It is anticipated that the parameter design method of conformal PML based on RCS optimization can be applied to the cognate absorbing boundary and 3D electromagnetic computation.

Optimization in a Design System for Complex Products

1992 ◽  
Author(s):  
Johan Malmqvist
Keyword(s):  
Parametric Design ◽  
System Optimization ◽  
Optimization Method ◽  
Design System ◽  
Design Problems ◽  
Design And Optimization ◽  
Complex Products ◽  
Knowledge Based ◽  
Product Models ◽  
Use Of Knowledge

Abstract This paper describes a system for parametric design and optimization of complex products. In the system, the use of knowledge-based and mathematical programming methods is combined. The motivation is that while knowledge-based methods are well suited for modeling products, they are insufficient when dealing with design problems that can be given an optimization formulation. This weakness was approached by including the information necessary for stating an optimization problem in the product models. A system optimization method can then be applied. The system also performs sensitivity analysis and has an interactive optimization module. The use of the system is illustrated by an example; the design and optimization of a two-speed gearbox.

A Novel Design and Optimization Method of an $LCL$ Filter for a Shunt Active Power Filter

2014 ◽  
Vol 61 (8) ◽  
pp. 4000-4010 ◽  
Author(s):  
Qian Liu ◽  
Li Peng ◽  
Yong Kang ◽  
Shiying Tang ◽  
Deliang Wu ◽  
...  
Keyword(s):  
Active Power Filter ◽  
Optimization Method ◽  
Active Power ◽  
Lcl Filter ◽  
Shunt Active Power Filter ◽  
Design And Optimization ◽  
Power Filter ◽  
Novel Design

Experimental investigations on atomization characteristics of dual-orifice atomizers part II: Optimization method application

2020 ◽  
pp. 095765092095996
Author(s):  
Xiongjie Fan ◽  
Cunxi Liu ◽  
Fuqiang Liu ◽  
Qianpeng Zhao ◽  
Jinhu Yang ◽  
...  
Keyword(s):  
Liquid Film ◽  
Mass Flow ◽  
Cone Angle ◽  
Optimization Method ◽  
Experimental Investigations ◽  
Structure Parameters ◽  
Spray Cone Angle ◽  
Spray Cone ◽  
Design And Optimization ◽  
Expansion Angle

In this paper, the optimization method we obtained from dual-orifice atomizers previously is used to design and optimize new dual-orifice atomizers, whereas there are some differences between the new dual-orifice atomizer and dual-orifice atomizer used in Part I. For example, the mass flow is much smaller, there is an expansion angle at pilot nozzle to regulate pilot stage spray cone angle, and there is no recess length between main nozzle and pilot nozzle. Influences of structure parameters on mass flow, spray cone angle and liquid film fusion and separation are investigated, which are consistent with the expectation. Structure parameters that meet performance requirements of dual-orifice atomizer are analyzed. In addition, a new phenomenon has been found is that liquid film oscillation appears with the increase of Δ P, which should be avoided during the design and optimization of new atomizers. Pilot liquid film oscillation will influence the development of dual-orifice liquid film. Pilot swirling groove depth and expansion angle of pilot nozzle are key parameters that influence liquid film oscillation. Conclusions in this paper can be used to guide the design and optimization of new dual-orifice atomizers.

scholarly journals Optimal Design of Inlet Passage for Waterjet Propulsion System Based on Flow and Geometric Parameters

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Weixuan Jiao ◽  
Li Cheng ◽  
Di Zhang ◽  
Bowen Zhang ◽  
Yeping Su ◽  
...  
Keyword(s):  
Velocity Ratio ◽  
Optimization Method ◽  
Hydraulic Performance ◽  
Numerical Results ◽  
Propulsion System ◽  
Operating Conditions ◽  
Geometric Parameters ◽  
Hydraulic Characteristics ◽  
Design And Optimization ◽  
Ship Speed

As an important overcurrent component in a waterjet propulsion system, the inlet passage is used to connect the propulsion pump and the bottom of the propulsion ship. The anticavitation, vibration, and noise performance of the waterjet propulsion pump are significantly affected by the hydraulic performance of the inlet passage. The hydraulic performance of the inlet passage directly affects the overall performance of the waterjet propulsion system, thus the design and optimization method of the inlet passage is an important part of the hydraulic optimization of the waterjet propulsion system. In this study, the hydraulic characteristics of the inlet passage in the waterjet propulsion system with different flow parameters and geometric parameters were studied by a combination of numerical simulation and experimental verification. The model test was used to verify the hydraulic characteristics of the waterjet propulsion system, and the results show that the numerical results are in good agreement with the test results. The numerical results are reliable. The hydraulic performance of the inlet passage is significantly affected by the inlet velocity ratio. There is a certain correlation between the hydraulic performance of the inlet passage and ship speed, and the hydraulic performance of the inlet passage is limited by ship speed. The geometric parameters of the best optimization case are as follows: the inflow dip angle α is 35°, the length L is 6.38D0, and the upper lip angle is 4°. The optimal operating conditions are the conditions of IVR 0.69–0.87.

scholarly journals Wideband Printed Antenna Design Using a Shape Blending Algorithm

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Aiting Wu ◽  
Zhonghai Zhang ◽  
Boran Guan
Keyword(s):  
Optimization Method ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Printed Antenna ◽  
Rectangular Slot ◽  
Design And Optimization ◽  
Shape Blending ◽  
The Impact ◽  
Good Agreement

The shape of the tuning stub of the wide slot printed antenna is an important factor which affects the antenna’s performances. In this paper, a new design and optimization method of wideband printed slot antenna using a shape blending algorithm is presented. The proposed antenna consists of a wide rectangular slot and a tuning stub, whose profile is formed by the shape blending outcome from a pie and a diamond shape. The method is used to design an ultra-wideband antenna. The impact on the impedance bandwidth through the antenna geometry change with the different shape blending results has been investigated and analyzed. To verify the proposed design, the antenna prototype was designed, fabricated, and measured. The measured results are compared with the simulation and show good agreement.

Sign in / Sign up

Export Citation Format

Share Document