Y-branch edge coupler between cleaved single mode fiber and nano-scale waveguide on silicon-on-insulator platform

Author(s):  
Xin Tu ◽  
Hongyan Fu ◽  
Dongyu Geng
Nanophotonics ◽  
2012 ◽  
Vol 1 (1) ◽  
pp. 23-29 ◽  
Author(s):  
Weijian Yang ◽  
James Ferrara ◽  
Karen Grutter ◽  
Anthony Yeh ◽  
Chris Chase ◽  
...  

AbstractOptical-fiber-based, hollow-core waveguides (HCWs) have opened up many new applications in laser surgery, gas sensors, and non-linear optics. Chip-scale HCWs are desirable because they are compact, light-weight and can be integrated with other devices into systems-on-a-chip. However, their progress has been hindered by the lack of a low loss waveguide architecture. Here, a completely new waveguiding concept is demonstrated using two planar, parallel, silicon-on-insulator wafers with high-contrast subwavelength gratings to reflect light in-between. We report a record low optical loss of 0.37 dB/cm for a 9-μm waveguide, mode-matched to a single mode fiber. Two-dimensional light confinement is experimentally realized without sidewalls in the HCWs, which is promising for ultrafast sensing response with nearly instantaneous flow of gases or fluids. This unique waveguide geometry establishes an entirely new scheme for low-cost chip-scale sensor arrays and lab-on-a-chip applications.


2017 ◽  
Vol 38 (5) ◽  
pp. 054007 ◽  
Author(s):  
Rongrui Liu ◽  
Yubing Wang ◽  
Dongdong Yin ◽  
Han Ye ◽  
Xiaohong Yang ◽  
...  

2011 ◽  
Vol 284-286 ◽  
pp. 711-716
Author(s):  
Dan Feng Cui ◽  
Chen Yang Xue ◽  
Xiao Gang Tong ◽  
Yu Jian Jin ◽  
Wen Dong Zhang

In this paper, we discuss the theory research and testing methods of a grating coupler. The grating coupling efficiency of parameters and the corresponding theoretical simulation was studied systematically. Meanwhile, the coupling efficiency in theory can be improved to 76% using an optimized grating design. The fabrication of the couplers in silicon-on-insulator is focusing on ion beam method (FIB). Using the tunable NewFocus laser with an adjustable extent of 1520~1570nm as the sources, Si waveguide grating is achieved vertical coupler through coupling a single-mode fiber with the diameter of 10.4. In the experiment, when the input wavelength is 1550nm, the maximum coupling efficiency is measured approximately 31% and 1 dB bandwidth is approximately 30 nm.


2002 ◽  
Vol 722 ◽  
Author(s):  
T. S. Sriram ◽  
B. Strauss ◽  
S. Pappas ◽  
A. Baliga ◽  
A. Jean ◽  
...  

AbstractThis paper describes the results of extensive performance and reliability characterization of a silicon-based surface micro-machined tunable optical filter. The device comprises a high-finesse Fabry-Perot etalon with one flat and one curved dielectric mirror. The curved mirror is mounted on an electrostatically actuated silicon nitride membrane tethered to the substrate using silicon nitride posts. A voltage applied to the membrane allows the device to be tuned by adjusting the length of the cavity. The device is coupled optically to an input and an output single mode fiber inside a hermetic package. Extensive performance characterization (over operating temperature range) was performed on the packaged device. Parameters characterized included tuning characteristics, insertion loss, filter line-width and side mode suppression ratio. Reliability testing was performed by subjecting the MEMS structure to a very large number of actuations at an elevated temperature both inside the package and on a test board. The MEMS structure was found to be extremely robust, running trillions of actuations without failures. Package level reliability testing conforming to Telcordia standards indicated that key device parameters including insertion loss, filter line-width and tuning characteristics did not change measurably over the duration of the test.


2021 ◽  
Vol 395 ◽  
pp. 127226
Author(s):  
Jun Guo ◽  
Xiao Hu ◽  
Jie Ma ◽  
Luming Zhao ◽  
Deyuan Shen ◽  
...  

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Georg Rademacher ◽  
Benjamin J. Puttnam ◽  
Ruben S. Luís ◽  
Tobias A. Eriksson ◽  
Nicolas K. Fontaine ◽  
...  

AbstractData rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation.


Sign in / Sign up

Export Citation Format

Share Document