Experimental and Numerical Analysis of Natural Convection in Geometrically Modeled Core Catcher of the Liquid-Metal-Cooled Fast Reactor

2009 ◽  
Vol 165 (1) ◽  
pp. 43-52 ◽  
Author(s):  
Anil Kumar Sharma ◽  
Sanjay Kumar Das ◽  
J. Harvey
Keyword(s):  
Natural Convection ◽  
Numerical Analysis ◽  
Liquid Metal ◽  
Fast Reactor ◽  
Core Catcher

scholarly journals ESFR SMART PROJECT CONCEPTUAL DESIGN OF IN-VESSEL CORE CATCHER

2021 ◽  
Vol 247 ◽  
pp. 01002
Author(s):  
Joel Guidez ◽  
Antoine Gerschenfeld ◽  
Janos Bodi ◽  
Konstantin Mikityuk ◽  
Francisco Alvarez-Velarde ◽  
...  
Keyword(s):  
Natural Convection ◽  
Fast Reactor ◽  
Passive Control ◽  
Mitigation Strategies ◽  
Severe Accident ◽  
Fukushima Accident ◽  
The Core ◽  
Core Catcher ◽  
Thermal Calculations ◽  
Core Meltdown

Even before Fukushima accident occurred, the safety authorities have required that new power plant designs must take into account beyond design-basis accidents including possible core meltdown. Among the mitigation strategies, the corium retention must be ensured, so a core catcher is implemented in the design of the Generation IV Sodium-cooled Fast Reactor. An internal core catcher within the vessel (in-vessel retention) is the option chosen for the European Sodium-cooled Fast Reactor investigated in the H2020 ESFR-SMART project. The new core investigated in ESFR SMART with lower void effect has a better behavior in case of severe accident. The use of passive control rods is also an improvement for prevention of severe accident. Moreover, we have in the ESFR SMART core dedicated tubes for corium discharge that should allow discharging quickly the melted materials and should help to prevent large criticality. Calculations show that after several seconds, these discharge tubes begin to open, and the corium arrives by this preferential way on the core catcher, quicker and in limited quantities at the beginning of the accident. However, the core catcher is designed to be able to retain the whole core meltdown. Its design allows good possibilities of cooling by natural convection of sodium. Some thermal calculations were provided with a multi-layer concept but the global mechanical conception seems difficult. So a one layer core catcher in molybdenum, material compatible with sodium and used on the core catcher of the last SFR, started in 2016: BN 800, is investigated. Explanations are given on the choice of this material proposed for the catcher and used for thermal calculations. With the proposed design, the corium is spread on the core catcher and the residual power of the corium can be dispelled by natural convection by the sodium circulating around and above the core catcher without boiling of sodium if the melted core is less than about 25% of whole core. In case of bigger quantities of melted core, boiling of sodium could appear under the core catcher. Further less conservative calculations would be necessary to better know the limit.

Oscillatory Natural Convection of a Liquid Metal in Circular Cylinders

1994 ◽  
Vol 116 (3) ◽  
pp. 627-632 ◽  
Author(s):  
Y. Kamotani ◽  
F.-B. Weng ◽  
S. Ostrach ◽  
J. Platt
Keyword(s):  
Experimental Study ◽  
Natural Convection ◽  
Liquid Metal ◽  
Oscillatory Flow ◽  
Circular Cylinders ◽  
Flow Structures ◽  
Supercritical Flow ◽  
Aspect Ratios ◽  
Oscillation Frequencies ◽  
Rayleigh Numbers

An experimental study is made of natural convection oscillations in gallium melts enclosed by right circular cylinders with differentially heated end walls. Cases heated from below are examined for angles of inclination (φ) ranging from 0 deg (vertical) to 75 deg with aspect ratios Ar (height/diameter) of 2, 3, and 4. Temperature measurements are made along the circumference of the cylinder to detect the oscillations, from which the oscillatory flow structures are inferred. The critical Rayleigh numbers and oscillation frequencies are determined. For Ar=3 and φ = 0 deg, 30 deg the supercritical flow structures are discussed in detail.

scholarly journals Combined experimental and numerical analysis of a bubbly liquid metal flow

2017 ◽  
Vol 228 ◽  
pp. 012006 ◽  
Author(s):  
B Krull ◽  
E Strumpf ◽  
O Keplinger ◽  
N Shevchenko ◽  
J Fröhlich ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Liquid Metal ◽  
Metal Flow ◽  
Bubbly Liquid ◽  
Liquid Metal Flow
Sign in / Sign up

Export Citation Format

Share Document