Neural Network with Local Memory for Nuclear Reactor Power Level Control

2001 ◽  
Vol 133 (2) ◽  
pp. 213-228 ◽  
Author(s):  
Önder Uluyol ◽  
Magdi Ragheb ◽  
Lefteri Tsoukalas
Keyword(s):  
Neural Network ◽  
Nuclear Reactor ◽  
Power Level ◽  
Reactor Power ◽  
Level Control ◽  
Local Memory

scholarly journals The Local Seismoacoustic Wavefield of a Research Nuclear Reactor and Its Response to Reactor Power Level

2020 ◽  
Vol 92 (1) ◽  
pp. 378-387
Author(s):  
Omar E. Marcillo ◽  
Monica Maceira ◽  
Chengping Chai ◽  
Christine Gammans ◽  
Riley Hunley ◽  
...  
Keyword(s):  
Energy Transport ◽  
Nuclear Reactor ◽  
Power Level ◽  
National Laboratory ◽  
Reactor Power ◽  
Operational Conditions ◽  
Oak Ridge ◽  
Research Nuclear Reactor ◽  
Full Power ◽  
Power Operation

Abstract We describe the seismoacoustic wavefield recorded outdoors but inside the facility fence of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (Tennessee). HFIR is a research nuclear reactor that generates neutrons for scattering, irradiation research, and isotope production. This reactor operates at a nominal power of 85 MW, with a full-power period between 24 and 26 days. This study uses data from a single seismoacoustic station that operated for 60 days and sampled a full operating reactor cycle, that is, full-power operation and end-of-cycle outage. The analysis presented here is based on identifying signals that characterize the steady, that is, full-power operation and end-of-cycle outage, and transitional, that is, start-up and shutdown, states of the reactor. We found that the overall seismoacoustic energy closely follows the main power cycle of the reactor and identified spectral regions excited by specific reactor operational conditions. In particular, we identified a tonal noise sequence with a fundamental frequency around 21.4 Hz and multiple harmonics that emerge as the reactor reaches 90% of nominal power in both seismic and acoustic channels. We also utilized temperature measurements from the monitoring system of the reactor to suggest links between the operation of reactor’s subsystems and seismoacoustic signals. We demonstrate that seismoacoustic monitoring of an industrial facility can identify and track some industrial processes and detect events related to operations that involve energy transport.

Temperature Transients in a Triple Heat Exchanger

1984 ◽  
Vol 198 (3) ◽  
pp. 145-154
Author(s):  
P C Chiu ◽  
E H K Fung
Keyword(s):  
Heat Exchanger ◽  
Nuclear Reactor ◽  
Reactor Power ◽  
Solar Heating ◽  
Inlet Temperature ◽  
Exchange Processes ◽  
Flow Experiments ◽  
Heating Plant ◽  
Reactor Power Plant ◽  
Secondary Fluid

A triple heat exchanger, so called because there are three heat exchange processes taking place in it, was built to simulate the system behaviour of a nuclear reactor power plant or a solar heating plant which is characterized by the two circulating loops of the fluid flow. Experiments were carried out to study the temperature transients under disturbances in secondary fluid inlet temperature and power output from immersion heaters. Numerical results were obtained from the weighted residual formulation of the proposed dynamic model and they were shown to be in general agreement with the two sets of experimental responses.

Sign in / Sign up

Export Citation Format

Share Document