scholarly journals Analysis of water erosion processes using terrestrial laser scanning

2013 ◽  
pp. 45-52 ◽  
Author(s):  
Pawel Dabek
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Water Erosion ◽  
Erosion Processes

scholarly journals Spatiotemporal Patterns of Hillslope Erosion Investigated Based on Field Scouring Experiments and Terrestrial Laser Scanning

2021 ◽  
Vol 13 (9) ◽  
pp. 1674
Author(s):  
Pengfei Li ◽  
Mingkui Hao ◽  
Jinfei Hu ◽  
Chendi Gao ◽  
Guangju Zhao ◽  
...  
Keyword(s):  
Soil Erosion ◽  
Sediment Yield ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Sharp Decrease ◽  
Spatiotemporal Patterns ◽  
Sediment Yields ◽  
Weak Relationship ◽  
Erosion Processes ◽  
Relative Errors

Hillslope erosion is an essential source of catchment sediment yield. However, the current understanding of the spatiotemporal patterns of field hillslope erosion processes is limited. In this study, fourteen runoff scouring experiments were undertaken on two plots (A and B) established on one field slope of the hilly and gully loess plateau in China. Terrestrial laser scanning (TLS) was employed to investigate soil erosion processes across the hillslopes of the plots. The results demonstrated that the TLS-derived cumulative sediment yields of the hillslopes were more accurate than the TLS-derived consecutive sediment yields (i.e., the sediment yields for individual experiments). The magnitudes of the mean absolute/relative errors for the TLS-derived cumulative sediment yield for slopes A and B were 0.87 kg/25.02% and 1.26 kg/56.82%, respectively, with the linear relation R2 between the calculated and measured values over 0.60 (p < 0.001). The sediment yields from the hillslopes fluctuated considerably even when the runoff production became stable, leading to a weak relationship between the sediment yield and runoff discharge (the R2 values for slopes A and B were 0.57 (p = 0.002) and 0.08 (p = 0.321) for inter-experiments, and 0.37 (p < 0.001) and 0.06 (p = 0.035) for intra-experiments, respectively). The development of hillslope erosion was found to experience three major stages, which included a rapid increase and widespread distribution, a sharp decrease, and a stable distribution of the area with erosion/deposition. The rill development impacted the cumulative erosion and sediment yield rather than the cumulative deposition, with the impacts of rill depth and rill width development being stronger than those of rill length. The peak sediment yield corresponded well with the evolution of rills, partly accounting for the weak relationship between runoff and sediment yield. Our results provide a useful reference for the development of process-based soil erosion models and the establishment of spatially targeted control of soil erosion.

scholarly journals Evaluation of water soil erosion processes in forest areas in the Western Sudetes using terrestrial laser scanning and GIS tools

2018 ◽  
Vol 44 ◽  
pp. 00026 ◽  
Author(s):  
Paweł B. Dąbek ◽  
Romuald Żmuda ◽  
Jakub Szczepański ◽  
Bartłomiej Ćmielewski
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Soil Protection ◽  
Mountain Forest ◽  
Material Loss ◽  
Soil Material ◽  
Remote Sensing Technique ◽  
Erosion Processes ◽  
Spatial Range ◽  
Sheet Erosion

In the terms of forest soil protection function and the limitations of these functions resulting from forest works, the authors aim was to determine the intensity and spatial range of erosion, and the volume of soil material loss resulting by erosion processes and human activities. The remote sensing technique – terrestrial laser scanning (TLS) was used in the research of erosion processes occurring in the mountain forest on the surface of the skid trails. The measurements were performed with laser scanning resolution of 3×4 mm. Obtained points clouds have been interpolated to the digital terrain models 1 cm, which allowed evaluating the erosion phenomena using the method of differential models in the period of 2011–2013. In the study it was analysed the part of the skid trail (ca. 41 m2, ca. 35% average slope). It was determined that during the entire research period the amount of soil material loss was ca. 1.9 m3. The erosion processes occurred mainly in the form of sheet erosion with volume ca. 1.3 m3. The erosion processes in the form of sheet erosion occurred ca. 49% and 42% of trail section area, respectively. Results of the study indicate that it is efficient to use TLS for the monitoring of the erosion phenomena, qualitative and spatial range assessment. At the same time, it has been proven that intensive water erosion processes can also occur in forests.

Suitability of terrestrial laser scanning for studying surface roughness effects on concentrated flow erosion processes in rangelands

CATENA ◽  
2011 ◽  
Vol 87 (3) ◽  
pp. 398-407 ◽  
Author(s):  
Jan U.H. Eitel ◽  
C. Jason Williams ◽  
Lee A. Vierling ◽  
Osama Z. Al-Hamdan ◽  
Frederick B. Pierson
Keyword(s):  
Surface Roughness ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Roughness Effects ◽  
Concentrated Flow ◽  
Erosion Processes

scholarly journals Melite Civitas Romana in 3D: Virtualization Project of the Archaeological Park and Museum of the Domus Romana of Rabat, Malta

2021 ◽  
Vol 7 (1) ◽  
pp. 51-83
Author(s):  
Davide Tanasi ◽  
Stephan Hassam ◽  
Kaitlyn Kingsland ◽  
Paolo Trapani ◽  
Matthew King ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Structured Light ◽  
Terrestrial Laser Scanning ◽  
Archaeological Site ◽  
South Florida ◽  
Virtual Museum ◽  
Current State ◽  
Structured Light Scanning ◽  
The University ◽  
Archaeological Excavations

Abstract The archaeological site of the Domus Romana in Rabat, Malta was excavated almost 100 years ago yielding artefacts from the various phases of the site. The Melite Civitas Romana project was designed to investigate the domus, which may have been the home of a Roman Senator, and its many phases of use. Pending planned archaeological excavations designed to investigate the various phases of the site, a team from the Institute for Digital Exploration from the University of South Florida carried out a digitization campaign in the summer of 2019 using terrestrial laser scanning and aerial digital photogrammetry to document the current state of the site to provide a baseline of documentation and plan the coming excavations. In parallel, structured light scanning and photogrammetry were used to digitize 128 artefacts in the museum of the Domus Romana to aid in off-site research and create a virtual museum platform for global dissemination.

scholarly journals Terrestrial Laser Scanning for Vegetation Analyses with a Special Focus on Savannas

2021 ◽  
Vol 13 (3) ◽  
pp. 507
Author(s):  
Tasiyiwa Priscilla Muumbe ◽  
Jussi Baade ◽  
Jenia Singh ◽  
Christiane Schmullius ◽  
Christian Thau
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Spatial Scales ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Parameter Extraction ◽  
Airborne Lidar ◽  
Special Focus ◽  
Vegetation Parameter

Savannas are heterogeneous ecosystems, composed of varied spatial combinations and proportions of woody and herbaceous vegetation. Most field-based inventory and remote sensing methods fail to account for the lower stratum vegetation (i.e., shrubs and grasses), and are thus underrepresenting the carbon storage potential of savanna ecosystems. For detailed analyses at the local scale, Terrestrial Laser Scanning (TLS) has proven to be a promising remote sensing technology over the past decade. Accordingly, several review articles already exist on the use of TLS for characterizing 3D vegetation structure. However, a gap exists on the spatial concentrations of TLS studies according to biome for accurate vegetation structure estimation. A comprehensive review was conducted through a meta-analysis of 113 relevant research articles using 18 attributes. The review covered a range of aspects, including the global distribution of TLS studies, parameters retrieved from TLS point clouds and retrieval methods. The review also examined the relationship between the TLS retrieval method and the overall accuracy in parameter extraction. To date, TLS has mainly been used to characterize vegetation in temperate, boreal/taiga and tropical forests, with only little emphasis on savannas. TLS studies in the savanna focused on the extraction of very few vegetation parameters (e.g., DBH and height) and did not consider the shrub contribution to the overall Above Ground Biomass (AGB). Future work should therefore focus on developing new and adjusting existing algorithms for vegetation parameter extraction in the savanna biome, improving predictive AGB models through 3D reconstructions of savanna trees and shrubs as well as quantifying AGB change through the application of multi-temporal TLS. The integration of data from various sources and platforms e.g., TLS with airborne LiDAR is recommended for improved vegetation parameter extraction (including AGB) at larger spatial scales. The review highlights the huge potential of TLS for accurate savanna vegetation extraction by discussing TLS opportunities, challenges and potential future research in the savanna biome.

scholarly journals Terrestrial laser scanning intensity captures diurnal variation in leaf water potential

2021 ◽  
Vol 255 ◽  
pp. 112274
Author(s):  
S. Junttila ◽  
T. Hölttä ◽  
E. Puttonen ◽  
M. Katoh ◽  
M. Vastaranta ◽  
...  
Keyword(s):  
Diurnal Variation ◽  
Water Potential ◽  
Leaf Water Potential ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Leaf Water

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

Sign in / Sign up

Export Citation Format

Share Document