Performance and Environmental Impact of Rice Straw Fiber Mulching Films Manufactured with a Warming Agent

2019 ◽  
Vol 62 (2) ◽  
pp. 315-320
Author(s):  
Xianglan Ming ◽  
Haitao Chen ◽  
Dianming Ju
Keyword(s):  
Mechanical Properties ◽  
Titanium Dioxide ◽  
Soil Temperature ◽  
Rice Straw ◽  
Peak Position ◽  
Blank Group ◽  
Mean Values ◽  
Accumulated Temperature ◽  
The Mean ◽  
Grade 3

Abstract. This research evaluates the effects of adding various warming agents to rice straw fiber (RSF) films as sustainable alternatives to polyethylene-based films. The results for the mechanical properties of the RSF films with various warming agents show that the mean values of dry tensile strength and bursting strength of the films significantly differed according to the warming agent; in contrast, the mean wet tensile strengths and tearing strengths were not significantly different. The dry tensile strengths of films containing titanium dioxide were 9.7% and 26.8% higher than those of the films containing talc and kaolin, respectively. Additionally, the bursting strengths of the films containing titanium dioxide, calcium carbonate, and talc were 10.5%, 4.4%, and 15.8% higher, respectively, than those of the films containing kaolin. Thus, titanium dioxide was considered the best of the four warming agents for implementation in these films. The absorption peaks of the films with and without titanium dioxide were similar, with some differences in the peak position and relative intensities by Fourier transform infrared spectroscopy. Soil covering tests were conducted with films containing titanium dioxide (TDF), films with no added titanium dioxide, and a blank group. The degradation rate of the TDF reached grade 3 during the bolting stage of bok choy. At soil depths of 0, 5, and 10 cm, the total accumulated temperature of the TDF group was 11.53%, 7.78%, and 5.38% higher, respectively, than that of the blank group. Both TDF degradation and increased soil temperature improved the crop growth and soil microclimate. These results can serve as a reference to further improve the popularization and application of RSF film. Keywords: Degradable films, Mechanical properties, Rice straw, Soil temperature, Titanium dioxide.

scholarly journals Pregnancy rate in indigenous ewes by direct transfer of vitrified embryos

2018 ◽  
Vol 34 (1) ◽  
pp. 27-33 ◽  
Author(s):  
S Ghosh ◽  
MRI Talukder ◽  
PK Jha ◽  
MGS Alam ◽  
NS Juyena ◽  
...  
Keyword(s):  
Pregnancy Rate ◽  
Standard Procedure ◽  
Prostaglandin F2α ◽  
Corpora Lutea ◽  
Abdominal Ultrasonography ◽  
Mean Values ◽  
Embryo Recovery ◽  
Embryo Yield ◽  
The Mean ◽  
Grade 3

The effects of PMSG on superovulation, quality of embryos, and pregnancy rate were studied following transfer of vitrified embryos into indigenous ewes. Three donor and nine recipient ewes were synchronized using two intramuscular doses of Cloprostenol (PGF2α) equivalent to 125 μg Prostaglandin F2α (Ovoprost® Bayer, New Zealand) at an interval of nine days. To ensure ovulation donor and recipient ewes were treated with 600 iu and 250 iu Pregnant Mare Serum Gonadotrophin (PMSG; Folligon®, Intervet, Boxmeer, The Netherlands) at the time of 2nd injection of Prostaglandin F2α. All donor ewes were mated by fertile rams. Embryos were collected from donor ewes on day six after mating by inguinal laparotomy. Grade 1 embryos were vitrified using standard procedure. After thawing the embryos were transferred into the exteriorized uterine horn of the recipient by inguinal laparotomy. Pregnancy diagnosis was performed by trans-abdominal ultrasonography on Day 40 of transfer. Oestrus occurred 31.3 ± 8.1 hours after second injection of prostaglandin and 32.6 ± 8.7 hours in recipients. Oestrus lasted 24.7 ± 9.9 hours in donors and 32.8 ± 12.8 hours in recipients. The mean numbers of corpora lutea and embryos of donor ewes were 11.7 ± 4.0 and 8 ± 2.6, respectively. Total embryo recovery rate of donor ewes was 68.6%. The mean values of qualities of embryo yield of donor ewes were 6 ± 1.7 grade 1, 0.3 ± 0.6 grade 2, 1.3 ± 1.2 grade 3, and 0.3 ± 0.6 grade 4. Twenty embryos were vitrified, 16 embryos were transferred and four recipient ewes were found pregnant. The pregnancy rate of recipient ewes was 44.4%.Bangl. vet. 2017. Vol. 34, No. 1, 27-33

scholarly journals Enhancement of Mechanical Properties of Pure Aluminium through Contactless Melt Sonicating Treatment

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4479
Author(s):  
Agnieszka Dybalska ◽  
Adrian Caden ◽  
William D. Griffiths ◽  
Zakareya Nashwan ◽  
Valdis Bojarevics ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Pure Aluminium ◽  
Test Results ◽  
Extreme Pressure ◽  
Weibull Analysis ◽  
Mean Values ◽  
Untreated Material ◽  
The Mean ◽  
Pressure Changes

A new contactless ultrasonic sonotrode method was previously designed to provide cavitation conditions inside liquid metal. The oscillation of entrapped gas bubbles followed by their final collapse causes extreme pressure changes leading to de-agglomeration and the dispersion of oxide films. The forced wetting of particle surfaces and degassing are other mechanisms that are considered to be involved. Previous publications showed a significant decrease in grain size using this technique. In this paper, the authors extend this research to strength measurements and demonstrate an improvement in cast quality. Degassing effects are also interpreted to illustrate the main mechanisms involved in alloy strengthening. The mean values and Weibull analysis are presented where appropriate to complete the data. The test results on cast Al demonstrated a maximum of 48% grain refinement, a 28% increase in elongation compared to 16% for untreated material and up to 17% increase in ultimate tensile strength (UTS). Under conditions promoting degassing, the hydrogen content was reduced by 0.1 cm3/100 g.

scholarly journals Prospective Phase II Single-Center Study of the Safety of a Single Very High Dose of Liposomal Amphotericin B for Antifungal Prophylaxis in Patients with Acute Myeloid Leukemia

2013 ◽  
Vol 57 (6) ◽  
pp. 2596-2602 ◽  
Author(s):  
Luciana Annino ◽  
Anna Chierichini ◽  
Barbara Anaclerico ◽  
Erica Finolezzi ◽  
Marianna Norata ◽  
...  
Keyword(s):  
Acute Myeloid Leukemia ◽  
Amphotericin B ◽  
Myeloid Leukemia ◽  
Liposomal Amphotericin ◽  
Antifungal Prophylaxis ◽  
High Dose ◽  
Mean Values ◽  
The Mean ◽  
Grade 3 ◽  
Acute Myeloid

ABSTRACTSome preclinical and pharmacokinetic studies suggested the variable safety and the potential efficacy of an antifungal prophylaxis with a single high dose of liposomal amphotericin B (L-AmB) in high-risk patients. An open-label, prospective study was conducted with 48 adults receiving induction chemotherapy for acute myeloid leukemia (AML). Patients received a single infusion of 15 mg/kg of body weight L-AmB and, eventually, a second dose after 15 days of persistent neutropenia. The primary objective was tolerability and safety. Efficacy was also evaluated as a secondary endpoint. A pharmacokinetic study was performed with 34 patients in order to evaluate any association of plasma L-AmB levels with toxicity and efficacy. Overall, only 6 patients (12.5%) reported Common Toxicity Criteria (CTC) grade 3 hypokalemia, which was corrected with potassium supplementation in all cases, and no patient developed clinically relevant nephrotoxicity. Mild infusion-related adverse events occurred after 6 of 53 (11.3%) total infusions, with permanent drug discontinuation in only one case. Proven invasive fungal disease (IFD) was diagnosed in 4 (8.3%) patients. The mean AmB plasma levels at 6 h, 24 h, and 7 days after L-AmB administration were 160, 49.5, and 1 mg/liter, respectively. The plasma AmB levels were higher than the mean values of the overall population in 3 patients who developed CTC grade 3 hypokalemia and did not significantly differ from the mean values of the overall population in 3 patients who developed IFD. Our experience demonstrates the feasibility and safety of a single 15-mg/kg L-AmB dose as antifungal prophylaxis in AML patients undergoing induction chemotherapy.

scholarly journals INVESTIGATION OF SOME MECHANICAL PROPERTIES FOR NATURAL (EGGSHELL) AND INDUSTRIAL (CALCIUM CARBONATE) MATERIAL / REINFORCED WITH GLASS FIBER WITH POLYMER COMPOSITE

2020 ◽  
Vol 24 (06) ◽  
pp. 137-141
Author(s):  
Marwah Subhi Attallah ◽  
Keyword(s):  
Mechanical Properties ◽  
Calcium Carbonate ◽  
Glass Fiber ◽  
Glass Fibers ◽  
Matrix Material ◽  
Weight Fraction ◽  
Mean Values ◽  
Particle Size Analyzer ◽  
Carbonate Material ◽  
The Mean

The purpose of this paper is to discuss the influence of adding eggshell and calcium carbonate powder reinforced with glass fibers and epoxy resin. Hand Lay-upimethod was utilized for the preparation of samples from epoxyiresin as a matrix material with (6%weight fraction chopped glass fiber) and (2%,4%, 6% & 8% weight fraction eggshell, CaCO3 powder) as filler material . The tensile and impact properties are tested for the specimens containing calcium carbonate and eggshell powder reinfoced with glass fiber and epoxy resins, also the result analyzed by (SPSS) to determine the specimens have best mechanical properties. The mean particle size analyzer of the eggshell powder and calcium carbonate powder were (12.6µm, 0.4-1µm) respectively. The results showed that the mean values of tensile test, modulus of elasticity, impact strength and fracture toughness (247.50,222.00MPa) (8.450,7.500 GPa) (8.150, 7.500K.J/m2) (9.1675 , 7.8345 MPa.m1/2) respectively increased with the addition (6% glass fiber+8%CaCO2, eggshell), while the mean values of the elongation percentage at break (%) decrease with the addition (6% glass fiber+8%CaCO2). The SPSS statistical shown the values was significantly increased whenever the value (Sig < 0.05).

Articulatory Behavior Pre and Post Full-Mouth Tooth Extraction and Alveoloplasty

1980 ◽  
Vol 23 (3) ◽  
pp. 630-645 ◽  
Author(s):  
Gerald Zimmermann ◽  
J.A. Scott Kelso ◽  
Larry Lander
Keyword(s):  
Control Subject ◽  
High Speed ◽  
Tooth Extraction ◽  
Kinematic Parameters ◽  
Experimental Conditions ◽  
Mean Values ◽  
Articulatory Movements ◽  
The Mean ◽  
Experimental Subjects ◽  
Normal Speech

High speed cinefluorography was used to track articulatory movements preceding and following full-mouth tooth extraction and alveoloplasty in two subjects. Films also were made of a control subject on two separate days. The purpose of the study was to determine the effects of dramatically altering the structural dimensions of the oral cavity on the kinematic parameters of speech. The results showed that the experimental subjects performed differently pre and postoperatively though the changes were in different directions for the two subjects. Differences in both means and variabilities of kinematic parameters were larger between days for the experimental (operated) subjects than for the control subject. The results for the Control subject also showed significant differences in the mean values of kinematic variables between days though these day-to-day differences could not account for the effects found pre- and postoperatively. The results of the kinematic analysis, particularly the finding that transition time was most stable over the experimental conditions for the operated subjects, are used to speculate about the coordination of normal speech.

Comparative Study of Intranasal, Subcutaneous and Intravenous Administration of Desamino-D-Arginine Vasopressin (DDAVP)

1986 ◽  
Vol 55 (01) ◽  
pp. 108-111 ◽  
Author(s):  
M Köhler ◽  
P Hellstern ◽  
C Miyashita ◽  
G von Blohn ◽  
E Wenzel
Keyword(s):  
Factor Viii ◽  
Von Willebrand Factor ◽  
Factor Xii ◽  
Additional Advantage ◽  
Mean Values ◽  
Routes Of Administration ◽  
The Mean ◽  
Von Willebrand ◽  
Willebrand Factor ◽  
Factor Antigen

SummaryThis study was performed to evaluate the influence of different routes of administration on the efficacy of DDAVP treatment. Ten healthy volunteers received DDAVP intranasally (i.n.), subcutaneously (s.c.) and intravenously (i.v.) in a randomized cross-over trial. Factor XII and high molecular weight (HMW)-kininogen levels increased only slightly after DDAVP administration. The mean increase of factor VIII: C was 3.1 (i. v.), 2.3 (s. c.), and 1.3 (i.n.) - fold over baseline. Ristocetin cofactor (von Willebrand factor antigen) increased 3.1 (2.5), 2.0 (2.3) and 1.2 (1.2) - fold over baseline mean values after i.v., s.c. and i.n. DDAVP, respectively. The half-disappearance time of factor VIII and von Willebrand factor (vWF) after DDAVP ranged from five (factor VIII: C) to eight hours (vWF). The mean increase of fibrinolytic activity was more pronounced after i.v. DDAVP. The antidiuretic effect was moderate with no apparent differences between the routes of application. This study provides further evidence that both i.v. and s.c. DDAVP administration result in an appropriate and reliable stimulation of haemostasis. An additional advantage of s. c. administration is its suitability for home treatment.

Comparative Study of effectiveness of mobilization with movement (MWM) and End range mobilization (ERM) techniques in frozen shoulder

2018 ◽  
Vol 4 (4) ◽  
pp. 519-522
Author(s):  
Jeyakumar S ◽  
Jagatheesan Alagesan ◽  
T.S. Muthukumar
Keyword(s):  
Range Of Motion ◽  
Frozen Shoulder ◽  
Type I ◽  
Mean Values ◽  
Functional Activities ◽  
Group A ◽  
The Mean ◽  
Group B

Background: Frozen shoulder is disorder of the connective tissue that limits the normal Range of motion of the shoulder in diabetes, frozen shoulder is thought to be caused by changes to the collagen in the shoulder joint as a result of long term Hypoglycemia. Mobilization is a therapeutic movement of the joint. The goal is to restore normal joint motion and rhythm. The use of mobilization with movement for peripheral joints was developed by mulligan. This technique combines a sustained application of manual technique “gliding” force to the joint with concurrent physiologic motion of joint, either actively or passively. This study aims to find out the effects of mobilization with movement and end range mobilization in frozen shoulder in Type I diabetics. Materials and Methods: 30 subjects both male and female, suffering with shoulder pain and clinically diagnosed with frozen shoulder was recruited for the study and divided into two groups with 15 patients each based on convenient sampling method. Group A patients received mobilization with movement and Group B patients received end range mobilization for three weeks. The outcome measurements were SPADI, Functional hand to back scale, abduction range of motion using goniometer and VAS. Results: The mean values of all parameters showed significant differences in group A as compared to group B in terms of decreased pain, increased abduction range and other outcome measures. Conclusion: Based on the results it has been concluded that treating the type 1 diabetic patient with frozen shoulder, mobilization with movement exercise shows better results than end range mobilization in reducing pain and increase functional activities and mobility in frozen shoulder.

A COMPARISON OF TWO METHODS FOR MEASUREMENT OF ALDOSTERONE SECRETION RATE IN MAN

1966 ◽  
Vol 53 (2) ◽  
pp. 177-188 ◽  
Author(s):  
P. Lund-Johansen ◽  
T. Thorsen ◽  
K. F. Støa
Keyword(s):  
Urinary Excretion ◽  
Normal Subjects ◽  
Secretion Rate ◽  
Aldosterone Secretion ◽  
Simple Method ◽  
Mean Values ◽  
Pathological Conditions ◽  
Significant Difference ◽  
Derivative Method ◽  
The Mean

ABSTRACT A comparison has been made between (A), a relatively simple method for the measurement of aldosterone secretion rate, based on paper chromatography and direct densitometry of the aldosterone spot and (B) a more elaborate isotope derivative method. The mean secretion rate in 9 normal subjects was 112 ± 26 μg per 24 hours (method A) and 135 ± 35 μg per 24 hours (method B). The »secretion rate« in one adrenalectomized subject after the intravenous injection of 250 μg of aldosterone was 230 μg per 24 hours (method A) and 294 μg per 24 hours (method B). There was no significant difference in the mean values, and correlation between the two methods was good (r = 0.80). It is concluded that the densitometric method is suitable for clinical purposes as well as research, being more rapid and less expensive than the isotope derivative method. Method A also measures the urinary excretion of the aldosterone 3-oxo-conjugate, which is of interest in many pathological conditions. The densitometric method is obviously the less sensitive and a prerequisite for its use is an aldosterone secretion of 20—30 μg per 24 hours. Lower values are, however, rare in adults.

EFFECT OF OESTRONE-PELLET IMPLANTATION ON PLASMA LEVELS OF PROLACTIN

1970 ◽  
Vol 64 (2) ◽  
pp. 265-272 ◽  
Author(s):  
A. A. van der Gugten ◽  
M. Sala ◽  
H. G. Kwa
Keyword(s):  
Plasma Levels ◽  
Male Rats ◽  
Mean Values ◽  
The Mean ◽  
Dose Levels ◽  
Higher Doses ◽  
Primary Break

ABSTRACT Eight female and eight male rats were castrated at the age of 8 to 10 weeks. Four spayed and four orchidectomized rats received one oestrone/cholesterol pellet (200 μg oestrone) on the day of operation (day 0), a second pellet on day 11 and a third on day 23. The remaining animals received four oestrone/cholesterol pellets at these times. The fluctuations in the prolactin levels in the circulation induced by the oestrogen challenges in these animals were followed during 31 days by radioimmunoassays performed on days 3, 7, 9, 14, 15, 17, 23, 24, 25, 28 and 31. The results suggested that the homoeostatic mechanism regulating plasma levels of prolactin was capable of withstanding the three time-spaced oestrogen challenges only in the spayed animals receiving the lower doses of oestrogen, since it allowed the mean values of the prolactin levels to remain fairly constant during the first 4 weeks. The levels in this group rose to much higher levels only on day 31. The higher doses of oestrone in the spayed rats and both dose levels of oestrone in the orchidectomized animals apparently resulted in a primary break-down of the homoeostatic mechanism, since the prolactin levels in the animals of these groups rose to much higher levels either on day 7 or on day 9. This was followed by a period during which the prolactin levels appeared to be more or less under control, until a second and probably definitive failure of the homoeostatic mechanism allowed the mean levels to rise sharply again.

CONCENTRADO PROTEICO OBTIDO DAS FOLHAS DE MANDIOCA (Manihot esculenta Crantz) DE TRÊS VARIEDADES COMERCIAIS.

2017 ◽  
Vol 13 (1) ◽  
Author(s):  
Izabel Aparecida Soares ◽  
Mauro Sérgio Téo ◽  
Carlise DEBASTIANI ◽  
Suzymeire BARONI ◽  
Vanessa Silva RETUCI
Keyword(s):  
Manihot Esculenta ◽  
Crude Protein ◽  
Hydrocyanic Acid ◽  
Protein Concentrate ◽  
Manihot Esculenta Crantz ◽  
White Variety ◽  
Mean Values ◽  
Randomized Design ◽  
Significant Difference ◽  
The Mean

O trabalho teve por objetivo verificar diferenças entre rendimento do concentrado proteico e proteína bruta da folha da mandioca (Manihot esculenta Crantz), obtidos a partir de três variedades comerciais: branca, cascuda e vermelha. As manivas foram plantadas seguindo o delineamento experimental inteiramente casualizado com três repetições. Nas comparações entre as variedades, considerou coletas escalonadas pós-plantio, realizadas aos 12, 14 e 16 meses. O concentrado proteico foi obtido a partir da farinha das folhas inteiras e submetido ao método de termo - coagulação ácido e a proteína bruta pelo método padrão AOAC. Os dados foram submetidos a análise de variância e comparados pelo teste de Tukey - 5% de probabilidade. Os resultados não indicaram diferença significativa entre as médias obtidas para rendimento de concentrado proteico. Para a variável porcentagem de proteína bruta a variedade Branca foi a que apresentou maior valor, com média de 46,25%, seguida pela Cascuda e Vermelha, 44,52% e 37,30%, sucessivamente. Conclui-se que outros estudos devem avaliar condições que possam influenciar no teor de proteína foliar, como clima e solo, e, avaliar os níveis de ácido cianídrico de cada variedade, indicando qual das três é a melhor para a extração do concentrado proteico das folhas. Palavras chaves: Manihot esculenta Crantz, variedades comerciais, concentrado proteico, proteína bruta. ABSTRACT: The study aimed to assess the differences between income protein concentrate, crude protein of cassava leaf (Manihot esculenta Crantz), obtained from three commercial varieties: white, red and cascuda. The cuttings were planted following the completely randomized design with three replications. Comparisons between the varieties considered after planting staggered collections, held on 12, 14 and 16 months. The protein concentrate was obtained from flour of whole sheets and subjected to the term method - acid coagulation and crude protein by AOAC standard method. The data were submitted to ANOVA and Tukey test - 5% probability. The results indicated no significant difference between the mean values obtained for protein concentrate income. For the variable percentage of crude protein White variety showed the highest, with an average of 46.25%, followed by cascuda and Red, 44.52% and 37.30%, successively. We conclude that further studies should evaluate conditions that may affect the leaf protein content, such as climate and soil, and evaluate the hydrocyanic acid levels of each variety, indicating which of the three is the best for the extraction of protein concentrate from leaves Key words: Manihot esculenta Crantz, commercial varieties, protein concentrate, crude protein.

Sign in / Sign up

Export Citation Format

Share Document