Impact of Delayed Harvest on Corn Yield and Harvest Losses

2021 ◽  
Vol 37 (4) ◽  
pp. 595-604
Author(s):  
Aaron P Turner ◽  
Joshua J Jackson ◽  
Michael P Sama ◽  
Michael D Montross
Keyword(s):  
Standing Crop ◽  
Grain Quality ◽  
Corn Yield ◽  
Energy Costs ◽  
List Type ◽  
Yield Losses ◽  
Potential Yield ◽  
Multiple Points ◽  
Harvest Timing ◽  
Single Field

Highlights Changes in yield, losses, and quality due to delayed harvest were evaluated. No significant changes in potential yield were observed over three years. Observed yield decreased late season with lodging present. Losses at the combine head represented largest fraction of measured loss. Abstract . Potential changes in yield and harvest losses that can occur while field drying corn are key considerations when evaluating harvest timing and energy costs associated with artificial drying. This study presents a three-year evaluation of corn harvest in Kentucky. Potential yield, observed yield, measured losses, and quality changes were monitored in a single field at multiple points over the harvest season to assess changes with respect to time and moisture. Measured losses were typically less than 1% of the potential yield in a good standing crop, consistent with results from cooperator combines (0.8% to 2.4%). When lodging was present, variability increased, and measured losses increased to between 5.3% and 9.1% of the potential yield, primarily as a result of ears missed by the combine head. No significant changes in potential yield were found, indicating potential yield was stable over the period examined. In two of the three seasons evaluated, extended delays resulted in an increase in lodging, and the observed yield was significantly reduced by up to 42.5%. Allowing the grain to field dry generally improved test weight; however, there was a trend of increased mold and other damage with prolonged field drying in one season. Keywords: Combines, Grain quality, Harvest loss, Maize, Preharvest loss.

scholarly journals A molecular switch in sulfur metabolism to reduce arsenic and enrich selenium in rice grain

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Sheng-Kai Sun ◽  
Xuejie Xu ◽  
Zhong Tang ◽  
Zhu Tang ◽  
Xin-Yuan Huang ◽  
...  
Keyword(s):  
Grain Quality ◽  
Sulfur Metabolism ◽  
Physical Interaction ◽  
Rice Grain ◽  
Yield Losses ◽  
Serine Acetyltransferase ◽  
Cysteine Synthase ◽  
Arsenic Tolerance ◽  
Arsenic Accumulation ◽  
Low Levels

AbstractRice grains typically contain high levels of toxic arsenic but low levels of the essential micronutrient selenium. Anthropogenic arsenic contamination of paddy soils exacerbates arsenic toxicity in rice crops resulting in substantial yield losses. Here, we report the identification of the gain-of-function arsenite tolerant 1 (astol1) mutant of rice that benefits from enhanced sulfur and selenium assimilation, arsenic tolerance, and decreased arsenic accumulation in grains. The astol1 mutation promotes the physical interaction of the chloroplast-localized O-acetylserine (thiol) lyase protein with its interaction partner serine-acetyltransferase in the cysteine synthase complex. Activation of the serine-acetyltransferase in this complex promotes the uptake of sulfate and selenium and enhances the production of cysteine, glutathione, and phytochelatins, resulting in increased tolerance and decreased translocation of arsenic to grains. Our findings uncover the pivotal sensing-function of the cysteine synthase complex in plastids for optimizing stress resilience and grain quality by regulating a fundamental macronutrient assimilation pathway.

scholarly journals Corn Yield Loss Due to Volunteer Soybean

Weed Science ◽  
2016 ◽  
Vol 64 (3) ◽  
pp. 495-500 ◽  
Author(s):  
Jill Alms ◽  
Sharon A. Clay ◽  
David Vos ◽  
Michael Moechnig
Keyword(s):  
Loss Function ◽  
Growth Stage ◽  
Yield Loss ◽  
Corn Yield ◽  
Yield Losses ◽  
Herbicide Resistant ◽  
Growing Seasons ◽  
Previous Season ◽  
Control Volunteer ◽  
Soybean Plants

The widespread adoption of glyphosate-resistant corn and soybean in cropping rotations often results in volunteer plants from the previous season becoming problem weeds that require alternative herbicides for control. Corn yield losses due to season-long volunteer soybean competition at several densities in two growing seasons were used to define a hyperbolic yield loss function. The maximum corn yield loss observed at high volunteer soybean densities was about 56%, whereas, the incremental yield loss (I) at low densities was 3.2%. Corn yield loss at low volunteer soybean densities was similar to losses reported for low densities of velvetleaf and redroot pigweed, with 10% yield loss estimated to occur at 3 to 4 volunteer soybean plants m−2. Several herbicides, including dicamba with or without diflufenzopyr applied at the V2 growth stage of volunteer soybean, provided > 90% control, demonstrating several economical options to control volunteer glyphosate-resistant soybean in glyphosate-resistant corn. Reevaluation of control recommendations may be needed with commercialization of other genetically modified herbicide-resistant soybean varieties.

Inflectional Convex Space Curves

1984 ◽  
Vol 36 (3) ◽  
pp. 537-549 ◽  
Author(s):  
Tibor Bisztriczky
Keyword(s):  
Convex Hull ◽  
Convex Space ◽  
Intersection Point ◽  
List Type ◽  
Multiple Points ◽  
Space Curves ◽  
Euclidean Three Space ◽  
Set Of Points ◽  
Three Space ◽  
Regular Closed

Let Φ be a regular closed C2 curve on a sphere S in Euclidean three-space. Let H(S)[H(Φ) ] denote the convex hull of S[Φ]. For any point p ∈ H(S), let O(p) be the set of points of Φ whose osculating plane at each of these points passes through p.1. THEOREM ([8]). If Φ has no multiple points and p ∈ H(Φ), then |0(p) | ≧ 3[4] when p is [is not] a vertex of Φ.2. THEOREM ( [9]). a) If the only self intersection point of Φ is a doublepoint and p ∈ H(Φ) is not a vertex of Φ, then |O(p)| ≧ 2.b) Let Φ possess exactly n vertices. Then(1)|O(p)| ≦ nforp ∈ H(S) and(2)if the osculating plane at each vertex of Φ meets Φ at exactly one point, |O(p)| = n if and only if p ∈ H(Φ) is not vertex.

Response of Corn to Preemergence and Postemergence Applications of Saflufenacil

2009 ◽  
Vol 23 (3) ◽  
pp. 331-334 ◽  
Author(s):  
Nader Soltani ◽  
Christy Shropshire ◽  
Peter H. Sikkema
Keyword(s):  
Weed Control ◽  
Petroleum Hydrocarbons ◽  
Field Studies ◽  
Corn Yield ◽  
Yield Losses ◽  
Leaf Stage ◽  
Field Corn ◽  
Corn Field ◽  
Use Pattern

Saflufenacil (BAS 800H) is a new herbicide being developed by BASF for PRE broadleaf weed control in corn. Field studies were conducted at two Ontario locations in 2006 and 2007 to evaluate the tolerance of field corn to PRE and POST (spike and two- to three-leaf corn) applications of saflufenacil at 50, 100, and 200 g ai/ha with and without an adjuvant (surfactant blend + solvent [petroleum hydrocarbons]; 1% v/v). Saflufenacil applied PRE reduced corn height by as much as 12% with the highest rate of 200 g/ha; however, corn yield was not affected. When saflufenacil was applied without an adjuvant to corn at the spike stage, injury was as much as 12%, 7 d after treatment (DAT). However, corn height and yield were not affected. Saflufenacil applied POST to two- to three-leaf corn at 50 to 200 g/ha without an adjuvant resulted in as much as 25% injury and reduced corn height 31% but did not affect yield. Adding an adjuvant to POST applications of saflufenacil caused as much as 4 and 99% injury, reduced corn height 13 and 77%, and reduced corn yield 0 and 59% when applied to corn at the spike and at the two- to three-leaf stages, respectively. Based on these results, saflufenacil applied PRE can be safely used in corn at rates up to 200 g/ha. Saflufenacil applied to corn at the spike and two- to three-leaf stage at 50 or 100 g/ha without an adjuvant demonstrated acceptable corn tolerance and may allow for the use of saflufenacil beyond the proposed PRE use pattern. In contrast, applying saflufenacil POST with an adjuvant to spike and two- to three-leaf stage corn resulted in unacceptable injury and yield losses in field corn.

Dissipation of Fomesafen in New York State Soils and Potential to Cause Carryover Injury to Sweet Corn

2007 ◽  
Vol 21 (1) ◽  
pp. 206-212 ◽  
Author(s):  
Bradley J. Rauch ◽  
Robin R. Bellinder ◽  
Daniel C. Brainard ◽  
Mike Lane ◽  
Janice E. Thies
Keyword(s):  
New York ◽  
Soil Type ◽  
Sweet Corn ◽  
New York State ◽  
Dry Weight ◽  
Corn Yield ◽  
Yield Losses ◽  
Variety Trial ◽  
Snap Beans ◽  
Planting Season

The manufacturer's recommended rate for fomesafen in snap beans, dry beans, and soybeans may cause carryover injury in sweet corn. A field experiment, a survey, and multiple greenhouse experiments were conducted to (1) estimate the fomesafen residue concentrations in the soil that might result from use of lower than registered rates, (2) estimate fomesafen residue concentrations in growers' fields and evaluate grower practices for their effects on carryover potential, and (3) investigate the effects of soil type and sweet corn variety on the potential for fomesafen to cause injury to sweet corn. Results of the dissipation study predicted average soil concentrations to be approximately 0.019 mg fomesafen/kg soil at the start of the sweet corn planting season. Half-life values ranged between 28 and 66 d, with an average of 50 d. Residues in grower fields were slightly less than those found in the dissipation study. Injury from fomesafen varied significantly by sweet corn variety and by soil type. Sweet corn grown in soils with high organic matter and low pH were most susceptible to injury from fomesafen. At high rates of fomesafen (0.12 mg/kg), reductions in dry weight of sweet corn varieties ranged from 5 to 60%. At rates of fomesafen slightly higher than those detected in field soils at the time of sweet corn planting (0.03 mg/kg), dry weight either increased slightly (variety trial) or decreased by 6 to 12% (soil-effect trial) depending on soil type. The risk of sweet corn yield losses because of fomesafen carryover appear relatively low. Growers can reduce the risk of carryover injury by planting tolerant varieties in fields where fomesafen was applied the preceding year.

scholarly journals Performance of Sorghum Recombinant Inbred Lines (RIL) developed for rain-fed areas of Sudan

2015 ◽  
Vol 60 (4) ◽  
pp. 395-406
Author(s):  
El Hassan ◽  
Yasir Gamar ◽  
Ibrahim Elzein ◽  
Asma Ali ◽  
Tareg Ahmed
Keyword(s):  
Grain Yield ◽  
Grain Quality ◽  
Recombinant Inbred Lines ◽  
Block Design ◽  
Inbred Lines ◽  
Yield Potential ◽  
High Yield ◽  
Growth Stages ◽  
Potential Yield ◽  
Wide Range

Sorghum (Sorghum bicolor (L) Moench) is the most widely produced and consumed cereal crop in Sudan. However, productivity is low since the crop is produced in favorable and unfavorable environments where the crop suffers from drought stresses at different growth stages. In the present study, six sorghum inbred lines developed by local breeding program and two commercial checks were evaluated for grain yield potential, yield stability, some important agronomic characters and grain quality properties. Series variety trials were conducted at Elobeid and Suki, Damazin areas of Sudan, during three consecutive rainy seasons. The selected locations represent low, medium and high rainfall areas of Sudan. The trial was laid out in a randomized complete block design. The results revealed that mean squares of genotypes, seasons, locations, location x season, location x genotypes, season x genotypes and season x location x genotype interactions were highly significant (P=0.01) for grain yield. The sorghum genotypes Edo 34-23-4, Edo 26-18 and Edo 16-dwarf produced substantially higher grain yields than commercial checks and the trial mean. Their percentage yield increase ranged from 5% to 75% over commercial checks. The stability analysis revealed that the above mentioned Edo-genotypes had high yield potentials and were stable across a wide range of agricultural conditions. Moreover, the same Edo-lines showed early maturing compared to selected commercial checks and also the Edo-lines possessed good food grains and were market preferred and acceptable for making quality kisra (fermented sorghum pancake-like flatbread). The Edo developed lines also possess the acceptable grain quality in addition to moderate physical grain characteristics such as protein content, fat acidity and moisture content.

Effects of hybrid susceptibility and inoculation timing on Goss’s bacterial wilt and leaf blight severity and corn yield

Plant Disease ◽  
2021 ◽  
Author(s):  
Elizabeth C Bauske ◽  
Andrew J Friskop
Keyword(s):  
Disease Severity ◽  
Bacterial Wilt ◽  
Field Experiments ◽  
Yield Loss ◽  
Leaf Blight ◽  
Corn Yield ◽  
Yield Losses ◽  
Sequential Combination ◽  
High Level ◽  
Growing Region

Goss’s bacterial wilt and leaf blight (Goss’s wilt) of corn is the most important corn disease in North Dakota (ND), and yield loss due to the disease has not been reliably quantified in northern corn growing regions. To help quantify the amount of yield loss caused by Goss’s wilt, a total of six field experiments were conducted from 2015 to 2017. Experiments were designed in a randomized complete block with a split plot arrangement. Hybrids served as main plots and Clavibacter nebraskensis (Cn) inoculation timings as sub-plots. Three hybrids were used and classified as a susceptible, moderately susceptible, and resistant. Inoculation timings included a non-inoculated control, six to ten leaf collars (V6 to V10), reproductive silk stage (R1), or a sequential combination of V6 to V10 and R1. A high level of disease (greater than 50% on susceptible hybrid) occurred in three experiments, a low level of disease (less than 5% on susceptible hybrid) in one experiment, and no disease was reported in two experiments. A combined analysis of the high disease experiments indicated yield losses of 34 to 41% on the susceptible hybrid when Cn inoculation occurred at V6 to V10. Yield losses of 22 to 25% occurred on the moderately susceptible hybrid when C. nebraskensis inoculation occurred at V6 to V10, and statistical differences in yield loss were not found among inoculations timings on the resistant hybrid. Correlation analyses suggest that for every 1% increase in R1 disease severity on the susceptible hybrid, yield was reduced by 117 kg/ha (1.9 bu/A). The current study further demonstrates the importance of hybrid resistance and provides updated yield loss information on Goss’s wilt in a northern corn growing region.

Growth losses from winter drying (red belt damage) in lodgepole pine stands on the east slopes of the Rockies in Alberta

1987 ◽  
Vol 17 (10) ◽  
pp. 1289-1292 ◽  
Author(s):  
I. E. Bella ◽  
S. Navratil
Keyword(s):  
Lodgepole Pine ◽  
Growing Season ◽  
Height Growth ◽  
Yield Losses ◽  
Potential Yield ◽  
Terminal Bud ◽  
Growth Loss ◽  
Annual Volume ◽  
Pine Stands ◽  
Rotation Age

Red belt damage (reddening and death of foliage) occurs frequently in lodgepole pine Pinuscontorta var. latifolia Engelm. stands between certain elevations and may affect tree growth and even cause mortality. We examined growth impact in four pine stands (10, 55, 90, and 115 years old) where nearly all trees showed symptoms of damage. On young trees, visible damage ranged from 0 to 80% of foliage, and averaged about 35%. A highly significant reduction in height growth and terminal bud length (p < 0.01) of young trees was proportional to the amount of damage. As much as two-thirds growth loss occurred in trees with 60% or more necrotized foliage. On intermediate and mature lodgepole pine, reduction of annual volume increment in the growing season following damage was variable and reached as high as 50%, with no further significant reduction occurring in subsequent years. Potential yield losses at rotation age and forest management prescriptions for susceptible stands are presented.

Corn (Zea mays L.) response to sublethal rates of paraquat and fomesafen at vegetative growth stages

2019 ◽  
Vol 33 (04) ◽  
pp. 595-600
Author(s):  
Benjamin P. Sperry ◽  
Benjamin H. Lawrence ◽  
Jason A. Bond ◽  
Daniel B. Reynolds ◽  
Bobby R. Golden ◽  
...  
Keyword(s):  
Growth Stage ◽  
Yield Loss ◽  
Zea Mays L ◽  
Growth Stages ◽  
Corn Yield ◽  
Internode Elongation ◽  
Yield Losses ◽  
Target Movement ◽  
Significant Injury ◽  
Over Time

AbstractResearch was conducted from 2013 to 2015 across three sites in Mississippi to evaluate corn response to sublethal paraquat or fomesafen (105 and 35 g ai ha−1, respectively) applied PRE, or to corn at the V1, V3, V5, V7, or V9 growth stages. Fomesafen injury to corn at three d after treatment (DAT) ranged from 0% to 38%, and declined over time. Compared with the nontreated control (NTC), corn height 14 DAT was reduced approximately 15% due to fomesafen exposure at V5 or V7. Exposure at V1 or V7 resulted in 1,220 and 1,110 kg ha−1 yield losses, respectively, compared with the NTC, but yield losses were not observed at any other growth stage. Fomesafen exposure at any growth stage did not affect corn ear length or number of kernel rows relative to the NTC. Paraquat injury to corn ranged from 26% to 65%, depending on growth stage and evaluation interval. Corn exposure to paraquat at V3 or V5 consistently caused greater injury across evaluation intervals, compared with other growth stages. POST timings of paraquat exposure resulted in corn height reductions of 13% to 50%, except at V7, which was most likely due to rapid internode elongation at that stage. Likewise, yield loss occurred after all exposure times of paraquat except PRE, compared with the NTC. Corn yield was reduced 1,740 to 5,120 kg ha−1 compared with the NTC, generally worsening as exposure time was delayed. Paraquat exposure did not reduce corn ear length, compared with the NTC, at any growth stage. However, paraquat exposure at V3 or V5 was associated with reduction of kernel rows by 1.1 and 1.7, respectively, relative to the NTC. Paraquat and fomesafen applications near corn should be avoided if conditions are conducive for off-target movement, because significant injury and yield loss can result.

scholarly journals Dynamic Transcriptome Analysis of Anther Response to Heat Stress during Anthesis in Thermotolerant Rice (Oryza sativa L.)

2020 ◽  
Vol 21 (3) ◽  
pp. 1155 ◽  
Author(s):  
Gang Liu ◽  
Zhongping Zha ◽  
Haiya Cai ◽  
Dandan Qin ◽  
Haitao Jia ◽  
...  
Keyword(s):  
Oryza Sativa ◽  
Molecular Breeding ◽  
Grain Quality ◽  
Oryza Sativa L ◽  
Core Gene ◽  
Heat Treatments ◽  
Stress Factors ◽  
Yield Losses ◽  
Main Gene ◽  
Heat Response

High temperature at anthesis is one of the most serious stress factors for rice (Oryza sativa L.) production, causing irreversible yield losses and reduces grain quality. Illustration of thermotolerance mechanism is of great importance to accelerate rice breeding aimed at thermotolerance improvement. Here, we identified a new thermotolerant germplasm, SDWG005. Microscopical analysis found that stable anther structure of SDWG005 under stress may contribute to its thermotolerance. Dynamic transcriptomic analysis totally identified 3559 differentially expressed genes (DEGs) in SDWG005 anthers at anthesis under heat treatments, including 477, 869, 2335, and 2210 for 1, 2, 6, and 12 h, respectively; however, only 131 were regulated across all four-time-points. The DEGs were divided into nine clusters according to their expressions in these heat treatments. Further analysis indicated that some main gene categories involved in heat-response of SDWG005 anthers, such as transcription factors, nucleic acid and protein metabolisms related genes, etc. Comparison with previous studies indicates that a core gene-set may exist for thermotolerance mechanism. Expression and polymorphic analysis of agmatine-coumarin-acyltransferase gene OsACT in different accessions suggested that it may involve in SDWG005 thermotolerance. This study improves our understanding of thermotolerance mechanisms in rice anthers during anthesis, and also lays foundation for breeding thermotolerant varieties via molecular breeding.

Sign in / Sign up

Export Citation Format

Share Document