EFFECT OF DEFORMATION RATE AND MOISTURE CONTENT ON THE MECHANICAL PROPERTIES OF RICE GRAINS

2002 ◽  
Vol 45 (1) ◽  
Author(s):  
G. F. Kamst ◽  
C. Bonazzi ◽  
J. Vasseur ◽  
J. J. Bimbenet
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Deformation Rate ◽  
Rice Grains

scholarly journals Mechanical properties of rough and dehulled rice during drying

2013 ◽  
Vol 2 (2) ◽  
Author(s):  
Osvaldo Resende ◽  
Paulo César Corrêa ◽  
Gabriel Henrique Horta de Oliveira ◽  
André Luis Duarte Goneli ◽  
Carmen Jarén
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Uniaxial Compression ◽  
Compression Test ◽  
Rupture Force ◽  
Compression Force ◽  
Rice Grains ◽  
Moisture Contents ◽  
Rough Rice ◽  
Value Range

This work aimed to determine the mechanical properties of rough and dehulled rice grains, for different moisture contents, by obtaining their rupture force, deformation, maximum compression force and proportional deformity modulus under a compression test. Rice grains, with moisture content varying from 0.12 to 0.30 (d.b.), were subject to an uniaxial compression in order to analyze these properties. On reducting moisture content the rupture force increased from 37.2 to 70.6 N for dehulled rice and 48.0 to 79.5 N for rough rice. The average compression force varied from 131 to 171 N for dehulled rice and 203 to 283 N for rough rice. The value range of proportional deformity modulus was from 5.5 x 109 to 7.4 x 109 Pa for dehulled rice and 9.5 x 109 to 12.3 x 109 Pa for rough rice. Rough rice presented more resistance to compression compared to dehulled rice.

scholarly journals Mechanical properties of rough and dehulled rice during drying

2013 ◽  
Vol 2 (2) ◽  
Author(s):  
Osvaldo Resende ◽  
Paulo César Corrêa ◽  
Gabriel Henrique Horta de Oliveira ◽  
André Luis Duarte Goneli ◽  
Carmen Jarén
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Uniaxial Compression ◽  
Compression Test ◽  
Rupture Force ◽  
Compression Force ◽  
Rice Grains ◽  
Moisture Contents ◽  
Rough Rice ◽  
Value Range

This work aimed to determine the mechanical properties of rough and dehulled rice grains, for different moisture contents, by obtaining their rupture force, deformation, maximum compression force and proportional deformity modulus under a compression test. Rice grains, with moisture content varying from 0.12 to 0.30 (d.b.), were subject to an uniaxial compression in order to analyze these properties. On reducting moisture content the rupture force increased from 37.2 to 70.6 N for dehulled rice and 48.0 to 79.5 N for rough rice. The average compression force varied from 131 to 171 N for dehulled rice and 203 to 283 N for rough rice. The value range of proportional deformity modulus was from 5.5 x 109 to 7.4 x 109 Pa for dehulled rice and 9.5 x 109 to 12.3 x 109 Pa for rough rice. Rough rice presented more resistance to compression compared to dehulled rice.

scholarly journals Symmetric Nature of Stress Distribution in the Elastic-Plastic Range of Pinus L. Pine Wood Samples Determined Experimentally and Using the Finite Element Method (FEM)

Symmetry ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 39
Author(s):  
Łukasz Warguła ◽  
Dominik Wojtkowiak ◽  
Mateusz Kukla ◽  
Krzysztof Talaśka
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Stress Distribution ◽  
Moisture Content ◽  
Tool Geometry ◽  
Wood Fibers ◽  
Data Set ◽  
Plastic Deformations ◽  
Pine Wood ◽  
Elastic Plastic

This article presents the results of experimental research on the mechanical properties of pine wood (Pinus L. Sp. Pl. 1000. 1753). In the course of the research process, stress-strain curves were determined for cases of tensile, compression and shear of standardized shapes samples. The collected data set was used to determine several material constants such as: modulus of elasticity, shear modulus or yield point. The aim of the research was to determine the material properties necessary to develop the model used in the finite element analysis (FEM), which demonstrates the symmetrical nature of the stress distribution in the sample. This model will be used to analyze the process of grinding wood base materials in terms of the peak cutting force estimation and the tool geometry influence determination. The main purpose of the developed model will be to determine the maximum stress value necessary to estimate the destructive force for the tested wood sample. The tests were carried out for timber of around 8.74% and 19.9% moisture content (MC). Significant differences were found between the mechanical properties of wood depending on moisture content and the direction of the applied force depending on the arrangement of wood fibers. Unlike other studies in the literature, this one relates to all three stress states (tensile, compression and shear) in all significant directions (anatomical). To verify the usability of the determined mechanical parameters of wood, all three strength tests (tensile, compression and shear) were mapped in the FEM analysis. The accuracy of the model in determining the maximum destructive force of the material is equal to the average 8% (for tensile testing 14%, compression 2.5%, shear 6.5%), while the average coverage of the FEM characteristic with the results of the strength test in the field of elastic-plastic deformations with the adopted ±15% error overlap on average by about 77%. The analyses were performed in the ABAQUS/Standard 2020 program in the field of elastic-plastic deformations. Research with the use of numerical models after extension with a damage model will enable the design of energy-saving and durable grinding machines.

scholarly journals Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1616
Author(s):  
Vincenzo Titone ◽  
Antonio Correnti ◽  
Francesco Paolo La Mantia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Mechanical Testing ◽  
Hydrolytic Degradation ◽  
Slight Reduction ◽  
Biodegradable Polyester ◽  
Molding Process ◽  
Elongation At Break ◽  
Effect Of Moisture

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that the amount of absorbed water—both before processing and before mechanical testing—causes an increase in elongation at break and a slight reduction of the elastic modulus and tensile strength. These changes have been associated with possible hydrolytic degradation during the compression molding process and, in particular, with the plasticizing action of the moisture absorbed by the specimens.

Influence of Moisture Content in some Mechanical Properties of Two Brazilian Tropical Wood Species

2014 ◽  
Vol 1025-1026 ◽  
pp. 42-45 ◽  
Author(s):  
Luiz A. Melgaço N. Branco ◽  
Eduardo Chahud ◽  
André Luis Christoforo ◽  
Francisco Antonio Rocco Lahr ◽  
Rosane A.G. Battistelle ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Moisture Content ◽  
Analysis Of Variance ◽  
Wood Species ◽  
Modulus Of Elasticity ◽  
Modulus Of Rupture ◽  
Tropical Wood ◽  
Fiber Saturation ◽  
Brazilian Standard

This study aimed, with the aid of analysis of variance (ANOVA), to investigate and quantify the influence of moisture ranging between 12% and over 30% (fiber saturation) on the mechanical properties: strength and modulus of elasticity in compression and in tension parallel to grain; modulus of rupture and modulus of elasticity in static bending; shear strength parallel to grain considering wood species Ipê (Tabebuia sp) and Angelim Araroba (Vataireopsis araroba). Tests were performed according to the assumptions and calculating methods Brazilian standard ABNT NBR 7190, Anexx B, totalizing 400 tests. Results of ANOVA revealed a significant reduction (16% on average) for mechanical properties wood due to the increase in moisture content from 12% to over 30% (fiber saturation). The same behavior also occurred when assembly containing the two species was considered.

Environmental Effects on the Static and Fatigue Behaviours of Hemp Fibre under Tensile Loading

2015 ◽  
Vol 798 ◽  
pp. 410-418
Author(s):  
Anh Dung Ngo ◽  
Thu Nga Ho ◽  
Khalid Sefrioui Manar
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Failure Modes ◽  
Harmful Effect ◽  
Tensile Loading ◽  
Ambient Air ◽  
Absorption Mechanism ◽  
Hemp Fibre ◽  
Temperature And Humidity ◽  
Static Tensile

Environmental and loading mode effects on the tensile properties of Hemp fibre were investigated. At first, absorption of moisture into the fibre from ambient air and absorption of water into the fibre in immersion were studied. Then static and cyclic loadings tensile tests were conducted in various temperature and humidity conditions. It was found that, in ambient air (0% < RH < 80%) the moisture content of the studied fibre decreased with the increase of temperature conformed to the GAB model suggesting a multilayer absorption mechanism. On the contrary, for the fibre immersed in water, the moisture content increased with the increase of temperature. The activation of temperature on the diffusion of the water into the fibre by micro-pores and lumens jointly with the lack of possibility for the imprisoned water to evaporate might be the cause of this effect. Experimental results suggested that temperature and humidity could individually reduce the mechanical properties of Hemp fibre. Their interaction caused even a more harmful effect. Semi empirical and neural networks were used to predict the hygro-thermal effects on the mechanical properties under static tensile loading. Broken surfaces of the specimens were also examined showing different failure modes for static and cyclic tensile loadings. Finally, the value of the cellulose micro-fibrils angle (MFA) estimated using the static tensile stress-strain curve was 8.4o±1.9o.

Sign in / Sign up

Export Citation Format

Share Document