scholarly journals Synthesis and Characterization of Strontium Oxide Nano Particle by Sol-Gel Method

2021 ◽  
Vol 37 (1) ◽  
pp. 177-180
Author(s):  
Alimuddin Alimuddin ◽  
Mohd Rafeeq
Keyword(s):  
Room Temperature ◽  
Sol Gel ◽  
Oxide Nanoparticles ◽  
Strontium Nitrate ◽  
Strontium Oxide ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method

Synthesis of strontium oxide nanoparticles was carried out by sol –gel method using strontium nitrate and sodium hydroxide at room temperature which is very simple and cost effective. The characterization of strontium oxide nanoparticles was done using X-ray diffraction, scanning electron microscopy (SEM) and Fourier transform infra-red (FTIR). X-ray diffraction pattern indicates that the nanoparticles are crystalline in nature. The crystalline size of strontium oxide nanoparticle was calculated by Debye-Scherrer formula. The crystalline sizes are about 80nm. The morphology of nanoparticles was observed and investigated using SEM. The material at room temperature, calcined at 2000C, 400 0C and 6000C respectively shows pseudo spherical shape, cubic form and finally it becomes cylindrical this shows that there is a agglomeration with increase in temperature. FTIR spectrum of strontium oxide shows the peak at 854.64 cm-1 which is due to Sr -O bond.

Impedance Spectroscopy Study of LiTaO3 Powder Synthesized via Sol-Gel Method

2012 ◽  
Vol 545 ◽  
pp. 275-278 ◽  
Author(s):  
Lili Widarti Zainuddin ◽  
Norlida Kamarulzaman
Keyword(s):  
Room Temperature ◽  
Single Phase ◽  
Sol Gel ◽  
Rhombohedral Structure ◽  
Spectroscopy Study ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Impedance Spectroscopy Study

A ceramics sample of LiTaO3 was prepared using a sol-gel method. The sample is annealed at 750 °C for 48 hours. X-ray diffraction analysis indicate the formation of single phase, rhombohedral structure. An ac impedance study was used to analyse the conductivity of LiTaO3 at room temperature and at various temperatures.

Structure and magnetic characterization of Sr-doped BiFeO3 prepared by sol–gel method

2021 ◽  
pp. 2150205
Author(s):  
Haiwen Chen ◽  
Shengli Hu ◽  
Ge Zhang ◽  
Zhengming Jiang ◽  
JiaJun Mo ◽  
...  
Keyword(s):  
Oxygen Vacancy ◽  
Sol Gel ◽  
Magnetization Measurement ◽  
Impurity Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Cubic Structure

Multiferroic nanocrystalline Bi[Formula: see text]Sr[Formula: see text]FeO3 ([Formula: see text], 0.05, 0.1) samples were synthesized using the sol–gel method and characterized by powder X-ray diffraction, Mössbauer spectroscopy and SQUID system. The small-angle X-ray diffraction analysis showed that the sample underwent phase transition from rhombohedral to pseudo-cubic structure with the enhancement of Sr content. In addition, impurity peaks gradually diminished, indicating that content of impurities of samples reduced. Furthermore, it can be determined that there is only Fe[Formula: see text] in all the samples and impurity phase that existed in the samples was Bi[Formula: see text]FeO[Formula: see text] by fitting Mössbauer spectra. It is further confirmed that Bi[Formula: see text] Sr[Formula: see text]FeO3 samples were generated by oxygen vacancy equilibrium valence state when Sr[Formula: see text] ions replaced Bi[Formula: see text] ions. The change of quadrupole splitting indicated that a low concentration of Sr[Formula: see text] ions diffused homogeneously in the sample. Magnetization measurement showed that the magnetization of the sample increased gradually with the substitution of Bi[Formula: see text] by nonequivalent Sr[Formula: see text] ions, which can be ascribed to the decrease of grain size and the increase of oxygen vacancy and specific surface in the samples.

Preparation and Characterization of Cr2O3 Nano-Powders by Sol-Gel Method

2007 ◽  
Vol 353-358 ◽  
pp. 2111-2114 ◽  
Author(s):  
Chun Cheng Zhu ◽  
Yan Hong ◽  
Jian Guang Zhang ◽  
Bai Bin Zhou
Keyword(s):  
Aqueous Ammonia ◽  
Sol Gel ◽  
Chromium Nitrate ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Xrd Techniques ◽  
Differential Thermogravimetry

Cr2O3 nano-powders were successfully fabricated with using chromium nitrate and aqueous ammonia as starting material and urea as dispersant agent by sol-gel method. The formation of crystalline phase during heat treatment of dry gel was characterized by differential thermogravimetry (DTG) and X-ray diffraction (XRD) techniques and the temperature of calcination was determined as 400°C. Scanning electron microscopy (SEM) was utilized to observe the morphology of the as-fabricated Cr2O3 particles. The results showed that Cr2O3 particles are spherical or square with little agglomeration and a diameter of about 30 nm. The specific surface area of Cr2O3 particles was measured as 44.23 m2/g by Brunauer-Emmett-Teller (BET).

Study of Titanium Dioxide Thin Film by Sol-Gel Method

2014 ◽  
Vol 925 ◽  
pp. 278-281 ◽  
Author(s):  
Sharipah Nadzirah ◽  
Uda Hashim ◽  
N. Malihah
Keyword(s):  
Thin Film ◽  
Titanium Dioxide ◽  
Spin Coating ◽  
Sol Gel ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method

Titanium dioxide (TiO2) thin films based interdigitated electrodes (IDEs) have been synthesized using sol-gel method with hydrochloric acid (HCl) as catalyst. The prepared TiO2 solution has been deposited onto silicon dioxide (SiO2) substrates via spin-coating technique. Film was annealed at 500 °C and aluminium (Al) IDEs have been fabricated. Finally the X-ray diffraction (XRD) shows high intensity of both anatase and rutile peaks exist on 10 nm TiO2 thin film. Average crystallite size of the nanoparticles is seen to be 25 nm. UvVisible spectroscopic (UvVis) technique was used for the transmittance spectra characterization of the sample.

Synthesis and Characterization of Nickel-Based Monolithic Aerogel via Sol-Gel Method

2011 ◽  
Vol 335-336 ◽  
pp. 368-371 ◽  
Author(s):  
Yu Tie Bi ◽  
Hong Bo Ren ◽  
Bo Wei Chen ◽  
Lin Zhang
Keyword(s):  
Electron Microscopy ◽  
Polyacrylic Acid ◽  
Sol Gel ◽  
Three Dimensional ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method

The synthesis and characterization of nickel-based aerogel prepared using nickel chloride as the precursor via sol-gel method is described. The addition of the polyacrylic acid as an template to the solution of NiCl2•6H2O can guide the gelation in the reaction to build a three dimensional open structure. The aerogel has been characterized using field emission scanning electron microscopy (FESEM), highresolution transmission electron microscopy (HRTEM), nitrogen adsorption desorption analysis and powder X-ray diffraction (XRD). The results indicate that the nickel-based aerogel has a typical three dimensional structure made up of spherical particles with an open porous network and has high surface area about 192 m2/g, average pore diameter about 40nm. The X-ray diffraction (XRD) patterns show that the aerogel prepared at room temperature belongs to amorphous material. The synthesis of nickel-based aerogel, using polyacrylic acid as an template, is especially unique in our experiment.

Synthesis and characterization of TiO2 using sol-gel method at different annealing temperatures

MRS Advances ◽  
2018 ◽  
Vol 3 (42-43) ◽  
pp. 2527-2535 ◽  
Author(s):  
H. Elbushra ◽  
M. Ahmed ◽  
H. Wardi ◽  
N. Eassa
Keyword(s):  
Sol Gel ◽  
X Ray Diffraction ◽  
Structure Quality ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Annealing Temperatures ◽  
Fluorescence Spectrometer

AbstractThis article aims to prepare high quality of TiO2 powder and study the effect of annealing temperature. TiO2 particles were synthesized by sol-gel method using titanium tetra chloride (TiCl4) as a precursor. The dried gel was annealed at temperatures of 500oC, 600oC, 700°C and 800 °C each for 4 hours. The as-prepared samples were further characterized using X-Ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray Fluorescence spectrometer (EDX), XRD showed anatase structure after annealing and its diffraction scattering intensity indicated the improvement in the crystal structure quality of TiO2 as the temperature increases. SEM micrographs showed a randomly distributed and non-uniform cluster of TiO2 that has a size increase with annealing temperatures. EDX indicated stoichiometric chemical composition between Ti and O enhanced by annealing.

scholarly journals Synthesis of Nano-Calcium Oxide from Waste Eggshell by Sol-Gel Method

2019 ◽  
Vol 11 (11) ◽  
pp. 3196 ◽  
Author(s):  
Lulit Habte ◽  
Natnael Shiferaw ◽  
Dure Mulatu ◽  
Thriveni Thenepalli ◽  
Ramakrishna Chilakala ◽  
...  
Keyword(s):  
Calcium Oxide ◽  
Metal Oxide Nanoparticles ◽  
Sol Gel ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Whole Process

The sol-gel technique has many advantages over the other mechanism for synthesizing metal oxide nanoparticles such as being simple, cheap and having low temperature and pressure. Utilization of waste materials as a precursor for synthesis makes the whole process cheaper, green and sustainable. Calcium Oxide nanoparticles have been synthesized from eggshell through the sol-gel method. Raw eggshell was dissolved by HCl to form CaCl2 solution, adding NaOH to the solution dropwise to agitate Ca (OH)2 gel and finally drying the gel at 900 °C for 1 h. The synthesized nanoparticle was characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-Ray fluorescence (XRF) and X-ray diffraction (XRD). The FTIR and XRD results have clearly depicted the synthesis of calcium oxide from eggshell, which is mainly composed of calcium carbonate. The FE-SEM images of calcium oxide nanoparticles showed that the particles were almost spherical in morphology. The particle size of the nanoparticles was in the range 50 nm–198 nm. Therefore, waste eggshell can be considered as a promising resource of calcium for application of versatile fields.

Magnetic Properties of Bulk Zn0.95-XMnXFe0.05O2 Prepared by Sol-Gel Method and Subsequent Hot Pressing

2011 ◽  
Vol 268-270 ◽  
pp. 356-359 ◽  
Author(s):  
Wen Song Lin ◽  
C. H. Wen ◽  
Liang He
Keyword(s):  
Magnetic Properties ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Sol Gel ◽  
Secondary Phase ◽  
X Ray Diffraction ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Doped Zno

Mn, Fe doped ZnO powders (Zn0.95-xMnxFe0.05O2, x≤0.05) were synthesized by an ameliorated sol-gel method, using Zn(CH3COO)2, Mn(CH3COO)2and FeCl2as the raw materials, with the addition of vitamin C as a kind of chemical reducer. The resulting powder was subsequently compacted under pressure of 10 MPa at the temperature of 873K in vacuum. The crystal structure and magnetic properties of Zn0.95-xMnxFe0.05O2powder and bulk samples have been investigated by X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). X-ray photoelectron spectroscopy (XPS) was used to study chemical valence of manganese, iron and zinc in the samples. The x-ray diffraction (XRD) results showed that Zn0.95-xMnxFe0.05O (x≤0.05) samples were single phase with the ZnO-like wurtzite structure. No secondary phase was found in the XRD spectrum. X-ray photoelectron spectroscopy (XPS) showed that Fe and Mn existed in Zn0.95-xMnxFe0.05O2samples in Fe2+and Mn2+states. The results of VSM experiment proved the room temperature ferromagnetic properties (RTFP) of Mn, Fe co-doped ZnO samples.

scholarly journals Effect of Preheating Temperature on Synthesis of Pure BiFeO3 via Sol–Gel Method

Nanopages ◽  
2019 ◽  
pp. 1-11
Author(s):  
G. M. Taha ◽  
M. N. Rashed ◽  
M. S. El-Sadek ◽  
M. A. Moghazy
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Pure Bifeo3 ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Preheating Temperature

Abstract BiFeO3 (BFO) nanopowder was synthesized in a pure form via a sol- gel method based on glycol gel reaction. Effect of drying and preheating temperature on preventing other phases was studied. Many parameters were studied as calcination temperature and time & stirring temperature as well. The prepared powder was characterized by X-Ray Diffraction of powder (XRD) and Transmission Electron Microscope (TEM). High pure BiFeO3 was obtained by preheated process at 400 °C for 0.5 h and calcination at 600 °C for 0.5 h without any impurities compared to dry at110 °C.

Effect of Synthesis Conditions on the Structure and Electrochemical Properties of LiNi1/2Mn1/2O2 by Sol Gel Method

2011 ◽  
Vol 399-401 ◽  
pp. 1447-1450
Author(s):  
Zhi Yong Yu ◽  
Han Xing Liu
Keyword(s):  
Electrochemical Properties ◽  
Sol Gel ◽  
Electrochemical Analysis ◽  
X Ray Diffraction ◽  
Capacity Fading ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Synthesis Conditions ◽  
A Current

The layered LiNi1/2Mn1/2O2 cathode materials were synthesized by a sol gel method. The effects of calcination temperature and time on the structural and electrochemical properties of the LiNi1/2Mn1/2O2 were investigated. The prepared samples were characterized by X-ray diffraction (XRD) and electrochemical analysis. The results revealed that the layered LiNi1/2Mn1/2O2 material could be optimal synthesized at temperature of 900°C for 10h. The sample prepared under the above conditions has the highest initial discharge capacity of 151 mAh/g and showed no dramatic capacity fading during 20 cycles between 2.5-4.5V at a current rate of 20mA/g.

Sign in / Sign up

Export Citation Format

Share Document