scholarly journals Preliminary Column Study and Biosorption Kinetic Profile of Cadmium (II) by Epichlorohydrin-Crosslinked Lumbang (Aleurites molucanna) Chitosan Composite

2019 ◽  
Vol 35 (1) ◽  
pp. 207-215
Author(s):  
Nelson R. Villarante ◽  
Jeriel Jon D. Tumpalan ◽  
Derick Erl P. Sumalapao
Keyword(s):  
Waste Water ◽  
Oxygen Demand ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Column Study ◽  
Kinetic Profile ◽  
Before And After ◽  
Order Kinetic Model ◽  
Waste Water Analysis ◽  
Pseudo Second Order

In this study, the biosorption potential of lumbang (Aleurites molucanna)-derived activated carbon towards Cd(II) in aqueous solution was investigated by coating and crosslinking the adsorbent with chitosan and epichlorohydrin, respectively. Batch adsorption studies were performed, and the effects of various parameters were evaluated. Results have shown that the optimum biosorption potential occurs at pH: 6.0, contact time: 45 min, temperature: 40°C, adsorbent dosage: 12 g/L, and initial Cd(II) concentration: 5 ppm. The biosorption kinetic profile obeyed the pseudo second-order kinetic model (R2=96.87%, p<0.001). Preliminary column study and waste water analysis revealed significant removal of Cd(II), with 89.59% and 49.08% of Cd(II) adsorbed and desorbed, respectively. There were significant reductions in the biochemical and chemical oxygen demand values of the waste water before and after passing through the column.

Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48

2011 ◽  
Vol 413 ◽  
pp. 148-153 ◽  
Author(s):  
Xue Na Hu ◽  
Ya Han ◽  
Jia Yan Li ◽  
Jun Yan Wu ◽  
Jian Rong Chen ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene ◽  
Poly Propylene

Thiol-functionalized MCM-48 (SH-MCM-48) was synthesized by co-condensation method, with co-templates of cetyltrimethylammonium bromide (CTAB) and nonionic poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) triblock copolymer (Pluronic P123). The resulting material was characterized by XRD and FT-IR spectrum. The potential of SH-MCM-48 for adsorption Zn (II) from aqueous solution was examined. Batch adsorption studies were carried out to investigate the effect of experimental parameters including pH, metal ions concentration and adsorption time. The maximum adsorption capacities of Zn (II) onto SH-MCM-48 were 30.12, 34.01 and 38.02 mg g-1 at the temperature of 303, 313 and 323K, respectively. The adsorption kinetics data were found to follow the pseudo-second-order kinetic model, and adsorption isotherms were fitted well with Langmuir and Freundlich models. Moreover, the adsorption thermodynamic parameters (△G0, △H0 and △S0) were measured, and indicated that the adsorption was an exothermic and spontaneous process.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

scholarly journals Removal of Levafix Red from Aqueous Solution with Treated Jute Stick and its Relevance to Pharmaceutical Field

2016 ◽  
Vol 19 (1) ◽  
pp. 75-84
Author(s):  
Rayhan Hossain ◽  
Mohammad Arifur Rahman ◽  
Nargish Jahan Ara ◽  
AM Shafiqul Alam
Keyword(s):  
Waste Water ◽  
Low Cost ◽  
Animal Health ◽  
Oxygen Demand ◽  
Free Water ◽  
Second Order ◽  
Batch Adsorption ◽  
High Concentration ◽  
Pseudo Second Order ◽  
Pharmaceutical Industries

The adsorption of levafix red (LR) dye from waste water via batch adsorption onto treated jute stick powder was investigated. Studies concerning the factors influencing the adsorption such as adsorbent dosage, pH, contact time and temperature were systematically investigated and discussed. The results revealed that the maximum removal of levafix red was ~91% from water. The kinetics data were analyzed using pseudo-first order and pseudo-second order models. It was best described by the pseudo-second order model. The adsorption equilibrium follows Langmuir isotherm. This result indicates that treated jute stick powder could be employed as low-cost alternatives to commercial activated carbon for the removal of levafix red (LR) from waste water. Rapid industrialization in Bangladesh has resulted in increased water pollution that has higher dye level. Waste water from dyeing and finishing factories is a significant source of environmental pollution. The waste water is typically characterized by high levels of COD (chemical oxygen demand) concentration, high concentration of coloring material, large amount of suspended solids, highly fluctuating pH and high temperature. Dyes may therefore present an ecotoxic hazard and introduces the potential danger of bioaccumulation that may eventually affect man by transport through the food chain. As pharmaceutical industries use lots of water and intake of this type of water might have adverse effects on human health. Therefore, water purification is extremely essential for human and animal health and dye free water may be farther purified for its proper use.Bangladesh Pharmaceutical Journal 19(1): 75-84, 2016

Biodecolorization of Basic Violet 03 Using Biochar Derived from Agricultural Wastes: Isotherm and Kinetics

2020 ◽  
Vol 14 (3) ◽  
pp. 316-326 ◽  
Author(s):  
Josephraj Jegan ◽  
Saravanan Praveen ◽  
Thillainayagam Bhagavathi Pushpa ◽  
Ravindran Gokulan
Keyword(s):  
Binding Capacity ◽  
Maximum Yield ◽  
Agricultural Wastes ◽  
Order Kinetic ◽  
Optimum Conditions ◽  
Batch Mode ◽  
Before And After ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Best Fit

In the present study, bioremediation of Basic Violet 03 is examined using biochar derived from agricultural wastes. The pyrolytic studies revealed that ideal temperature for maximum yield of biochar derived from Coconut Shell (CSB), Ground nut Shell (GnSB) and Rice Husk (RHB) was obtained as 400 °C, 350 °C and 300 °C respectively. Further from the batch mode of operations, it was concluded that the optimum conditions of biochar dose, pH, temperature and initial concentration are 4 g/L, 8, 40 °C and 75 mg/L with a maximum uptake of 15.79 mg/g, 17.28 mg/g, and 12.64 mg/g for CSB, GnSB and RHB. The adsorption isotherm studies concluded that the three-parameter Sips model was obtained to be the best fit with a maximum correlation coefficient (R2) of 0.9937, 0.9935 and 0.9965. The pseudo second order kinetic model was found to well represent the experimental kinetic data. The characterization results of biochar through SEM, EDX and FTIR revealed that there was a strong binding capacity of adsorbent was observed before and after adsorption process. The promising results concluded that biochar derived from agricultural wastes can potentially be utilized for the removal of cationic dyes.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Adsorption Removal of Copper and Nickel Ions from Wastewater by Ammonia Modified Cotton Stalks

2014 ◽  
Vol 955-959 ◽  
pp. 2440-2443 ◽  
Author(s):  
Jing Li ◽  
Dong Mei Jia ◽  
Chang Hai Li ◽  
Bao Qing Yu
Keyword(s):  
Copper Ions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Optimum Conditions ◽  
Nickel Ions ◽  
Adsorption Removal ◽  
Cotton Stalks ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The ammonia modified cotton stalks (CS) were utilized to adsorb the Ni2+and Cu2+ions from wastewaters, and the effect parameters (i.e. pH, contact time, adsorbent dose, and temperature) were also investigated by batch adsorption experiments. The maximum uptake was attained, i.e., 99.4% and 98.8%, respectively, for nickel and copper ions, under the optimum conditions (adsorbent dose: 10 g/L; pH: 6.0 (Ni2+), 5.0 (Cu2+); t: 75min; T: 20 °C) when the initial concentration of heavy metal ions was 20 mg/L. The adsorption process of nickel and copper ions on ammonia modified CS was well described by the pseudo-second-order kinetic model.

scholarly journals Adsorptive Studies for the Removal of Crystal Violet Dye from Aqueous Solution by Using Cicca Acida L. Stem - Activated Carbon

2021 ◽  
Vol 16 (2) ◽  
pp. 436-443
Author(s):  
Sharmila Ramasamy ◽  
Anbarasu Kaliyaperumal ◽  
Thamilarasu Pommanaickar
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Kinetic Model ◽  
Crystal Violet ◽  
Order Kinetic ◽  
Human Beings ◽  
Crystal Violet Dye ◽  
Before And After ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Textile industries discharge wastewater containing various dyes including Crystal Violet dye. These dyes are very harmful for human beings, animals and plants. Therefore, the attempt is made for adsorption framework on elimination of crystal violet dye by using Cicca acida L. stem-activated carbon from aqueous solution carried out under various experimental methods and optimization conditions. Adsorption data modeled with Freundlich, Langmuir and Tempkin adsorption isotherms. Thermodynamic factors like as ∆Ho, ∆So and ∆Go were calculated, which indicated that the adsorption was spontaneous and endothermic nature. Based on kinetic study, pseudo-second order kinetic model was fit compared to the pseudo-first order kinetic model. The adsorbent has been characterized by SEM before and after adsorption of crystal violet dye solution.

scholarly journals Adsorption Behaviour of Chromium(VI) onto Surface Modified Sugarcane Waste

2013 ◽  
Vol 28 (1-2) ◽  
pp. 113-122
Author(s):  
Kedar Nath Ghimire ◽  
Deepak Wagle ◽  
Suman Lal Shrestha
Keyword(s):  
Volume Ratio ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Method ◽  
Chromium Vi ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Surface Modified

An effective chemically modified adsorbent based on sugarcane waste has been prepared by treating with concentrated sulphuric acid in 2:1weight/volume ratio. Thus prepared adsorbent has been found to be effective in the adsorption of chromium from aqueous medium. The efficacy of the adsorbent in the removal of chromium was evaluated by batch adsorption method. The effect of initial concentration, contact time and pH of the solution was investigated. The maximum adsorption capacity onto this adsorbent was found to be 195 mg/g at their optimal pH 1 at which unmodified bagasse has only 58 mg/g. The characterization of adsorbent was done by determining surface area and Boehm’s titration method. Freundlich isotherm and pseudo-second order kinetic model gave better explanation of the adsorption process.

scholarly journals Removal of COD from Groundwater in and Around Industrial Areas - Using Activated Carbon Powder Prepared by Groundnut Foliage and Groundnut Husk

2021 ◽  
Vol 37 (4) ◽  
pp. 922-927
Author(s):  
A. Kistan ◽  
V. Kanchana ◽  
N. K. Geetha ◽  
G. Infant Sujitha
Keyword(s):  
Activated Carbon ◽  
Kinetic Model ◽  
Adsorption Process ◽  
Oxygen Demand ◽  
Carbon Powder ◽  
Order Kinetic ◽  
Industrial Areas ◽  
Sem Image ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The following study explains that the adsorption efficiency of activated carbon used by Groundnut foliage and groundnut husk for the deportation of COD (Chemical Oxygen demand) from groundwater collected from in and around industrial areas of Vellore district was investigated with different activating conditions (Activating agent- KOH, ZnCl2 and H3PO4; Impregnation ratio-1:1,1:2,1:2; and activation temeperture-500-700°C. The activated carbon prepared based on optimized condition has well-developed pore structure and functional groups which is confirmed from SEM image and FTIR analysis respectively. The adsorption equilibrium was reached in 240 min with the isotherm data fitted well in both the model such as Langmuir model and Freundlich’s model indicating chemisorption’s adsorption for the activated carbon. Moreover, the adsorption process was exothermic accompanied by a decrease in irregularity. Furthermore, the adsorption kinetic study indicated that the adsorption process of the prepared sample follows the pseudo-second-order kinetic model compare to the pseudo-first -order kinetic model

Sign in / Sign up

Export Citation Format

Share Document