scholarly journals Optimization for the Simultaneous Determination of Zinc in Environmental Samples With Calcon by Adsorptive Stripping Voltammetry : Response Surface Methodology

2017 ◽  
Vol 33 (04) ◽  
pp. 2060-2070
Author(s):  
Hamzar Suyani ◽  
Izzati Rahmi ◽  
Hilfi Pardi
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Simultaneous Determination ◽  
Environmental Samples ◽  
Stripping Voltammetry ◽  
Adsorptive Stripping Voltammetry

scholarly journals First Electrochemical Method of Nitrothal-Isopropyl Determination in Water Samples

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Dariusz Guziejewski ◽  
Agnieszka Nosal-Wiercińska ◽  
Sławomira Skrzypek ◽  
Witold Ciesielski ◽  
Sylwia Smarzewska
Keyword(s):  
Environmental Samples ◽  
Electrochemical Method ◽  
Concentration Level ◽  
Stripping Voltammetry ◽  
Adsorptive Stripping Voltammetry ◽  
Hanging Mercury Drop Electrode ◽  
Optimal Conditions ◽  
Step Potential ◽  
Accumulation Time

The aim of the research was the use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a hanging mercury drop electrode (HMDE) for the determination of nitrothal-isopropyl. It was found that optimal SW technique parameters were frequency, 200 Hz; amplitude, 50 mV; and step potential, 5 mV. Accumulation time and potential were studied to select the optimal conditions in adsorptive stripping voltammetry: 45 s at 0.0 V, respectively. The calibration curve (SWSV) was linear in the nitrothal-isopropyl concentration range from 2.0 × 10−7 to 2.0 × 10−6 mol L−1 with detection limit of 3.46 × 10−8 mol L−1. The repeatability of the method was determined at a nitrothal-isopropyl concentration level equal to 6.0 × 10−7 mol L−1 and expressed as RSD = 5.5% (n=6). The proposed method was successfully validated by studying the recovery of nitrothal-isopropyl in spiked environmental samples.

scholarly journals The determination of titanium contained in Tytanit biostimulant employed to improve crops performance in natural environmental samples

2017 ◽  
Vol 71 (2) ◽  
pp. 115
Author(s):  
Joanna Wasąg ◽  
Malgorzata Grabarczyk
Keyword(s):  
Natural Water ◽  
Water Samples ◽  
Environmental Samples ◽  
Stripping Voltammetry ◽  
Environmental Water ◽  
Adsorptive Stripping Voltammetry ◽  
Environmental Water Samples ◽  
Chloranilic Acid ◽  
Titanium Complex

<p>The purpose of this work was to determinate the amount of titanium in different environmental water samples spiked with crop biostimulant Tytanit. The measurements were conducted using adsorptive stripping voltammetry (AdSV). The titanium complex with chloranilic acid was accumulated on mercury film silver based electrode (Hg(Ag)FE) at the potential -0.3 V. The analysis of natural water samples enriched with Tytanit, collected in the eastern part ofPolandconfirms that this procedure is fast and essential for the determination of titanium in environmental water samples.</p>

Sign in / Sign up

Export Citation Format

Share Document