scholarly journals Corrosion Inhibition Efficiency of Bio Waste on Mild Steel in Acid Media

2015 ◽  
Vol 31 (3) ◽  
pp. 1703-1710 ◽  
Author(s):  
T Sathiyapriya ◽  
G Rathika
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Acid Media ◽  
Corrosion Inhibition Efficiency

scholarly journals CORROSION INHIBITION PERFORMANCE OF PINK, ORANGE AND WHITE COLOURED BOUGAINVILLEA GLABRA BRACT EXTRACT ON MILD STEEL IN 1N HCl

2017 ◽  
Vol 4 (1) ◽  
pp. 59-64
Author(s):  
Gunavathy N ◽  
Sangeetha M
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Optimum Concentration ◽  
Ftir Analysis ◽  
Acid Media ◽  
Maximum Inhibition ◽  
Corrosion Inhibition Efficiency ◽  
Inhibition Performance ◽  
Bougainvillea Glabra

The present study was undertaken to find out the phytochemicals present in Bougainvillea glabra bracts extract and to compare the corrosion inhibition efficiency between B.glabra Pink, Orange and White coloured bract extract on mild steel in 1N HCl. Phyto chemical analysis showed the presence of alkaloids, flavonoids, phenolic compounds and tannins in the extract as confirmed by implying different qualitative tests specified for these phytochemical. Corrosion rate, inhibition efficiency, FTIR analysis was determined. The corrosion of mild steel in 1N HCl acid media was significantly reduced upon the additions of BG bract extracts. The inhibition efficiency increased with the increasing concentration of the inhibitor. Maximum inhibition efficiency was observed at an optimum concentration of 2 % v/v.

scholarly journals Corrosion inhibition of mild steel by N, N’-(5,5- dimethylcyclohexane-1,3-diylidene)dianiline in acid media: Gravimetric and electrochemical evaluations

2021 ◽  
pp. 67-80
Author(s):  
K. Ragi ◽  
Joby Thomas Kakkassery ◽  
Vinod P. Raphael ◽  
Binsi M. Paulson ◽  
Reeja Johnson
Keyword(s):  
Schiff Base ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Electrochemical Noise ◽  
Electrochemical Impedance ◽  
Sem Analysis ◽  
Metal Dissolution ◽  
Acid Media ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition efficiency of the Schiff base N,N’-(5,5-dimethylcyclohexane-1,3-diylidene)dianiline (DmChDa) on mild steel in 1M HCl and 0.5M H2SO4 was evaluated using gravimetric, electrochemical impedance spectroscopy, potentiodynamic polarization and electrochemical noise measurement. Experimental results established that DmChDa possess relatively high corrosion inhibition capacity. Langmuir and El-Awady adsorption isotherms were obeyed by the Schiff base in 1M HCl and 0.5M H2SO4 respectively. SEM analysis showed that DmChDa was adsorbed on the steel surface during corrosion inhibition. The variation of metal dissolution with temperature was also examined using gravimetric study.

Adsorption and corrosion inhibition characteristics of two medicinal molecules

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Hydrochloric Acid ◽  
Corrosion Rate ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Half Life ◽  
Thermodynamic Data ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Corrosive Environment ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition characteristics of two medicinal molecules phenylalanine and rutin on mild steel in 1.0M Hydrochloric acid were evaluated using gravimetric method. Corrosion inhibition efficiency of 83.78 and 90.40 % was obtained respectively after seven days. However, phenylalanine showed weak accumulative higher corrosion inhibition efficiency. The presence of both molecules in the corrosive environment reduced the corrosion rate constant and increased the material half-life. Thermodynamic data calculated suggests a spontaneous adsorption of the molecules on the mild steel’s surface.

scholarly journals A Comparative Study on the Corrosion Inhibition of Mild Steel and Aluminium by Synthesized Inhibitors in Organic Acidic Medium

2020 ◽  
pp. 41-51
Author(s):  
Lalita Saini ◽  
R. K. Upadhyay
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Acidic Medium ◽  
Trichloroacetic Acid ◽  
Inhibition Efficiency ◽  
Corrosion Inhibition Efficiency ◽  
Scanning Electron Microscope Method ◽  
Scanning Electron

Mass loss and Scanning Electron Microscope method (SEM) have been used to study the corrosion inhibition efficiency on mild steel and aluminium using synthesized inhibitors i.e. N-Benzylidene aniline (CI1) and N-Benzylidene 4-methylaniline (CI2) in Trichloroacetic acid (TCAA). Study reveals that both mild steel and aluminium are prone to corrosion in organic acid like TCAA. Out of these two metals, aluminium is more vigorously corroded by the TCAA in comparison to mild steel in same conditions and synthesized inhibitors CI1 and CI2 are almost same effective for mild steel and aluminium.

New phosphonate based corrosion inhibitors for mild steel in hydrochloric acid useful for industrial pickling processes: experimental and theoretical approach

2017 ◽  
Vol 41 (21) ◽  
pp. 13114-13129 ◽  
Author(s):  
Neeraj Kumar Gupta ◽  
Chandrabhan Verma ◽  
R. Salghi ◽  
H. Lgaz ◽  
A. K. Mukherjee ◽  
...  
Keyword(s):  
Hydrochloric Acid ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Theoretical Approach ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Phosphorus Containing ◽  
Corrosion Inhibition Efficiency

Phosphorus containing compounds have been evaluated by experimental and theoretical techniques and more than 96% corrosion inhibition efficiency was observed at 200 ppm concentration.

scholarly journals Corrosion Inhibition of Mild Steel in Acidic Media by N-[(3,4-Dimethoxyphenyl)Methyleneamino]-4-Hydroxy-Benzamide

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Kashmitha Muthamma ◽  
Preethi Kumari ◽  
M. Lavanya ◽  
Suma A. Rao
Keyword(s):  
Dft Calculations ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Surface Characterization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Low Carbon ◽  
Acid Media

Abstract Mild steel (a low carbon steel) is an affordable engineering material used for many purposes in various environments including mild acidic environment with some precautions. The corrosion behaviour of mild steel (MS) in 0.5 M H2SO4 and 0.5 M HCl, in the temperature range (303–323 K) without and with the inhibitor N-[(3,4-dimethoxyphenyl) methyleneamino]-4-hydroxy-benzamide (DMHB), was investigated using Potentiodynamic polarization and Electrochemical impedance spectroscopy (EIS) techniques supplementing with surface characterization study using scanning electron microscope (SEM) and atomic force spectroscopy (AFM). Experimental observations were found to be in agreement with Density functional theory (DFT) calculations. The inhibition efficiency increases with increase in DMHB concentration and showed maximum inhibition efficiency of 86% in 0.5 M H2SO4 and 81% in 0.5 M HCl, respectively, at concentration of 3 × 10─3 M at 303 K. The inhibition efficiency of DMHB obtained relatively at its lower concentration (3 × 10─3 M) compared to other reported related compounds confirms its potential towards corrosion inhibition. The variation in the kinetic and thermodynamic parameters indicated physisorption of DMHB on MS and its mixed type inhibitive action followed Langmuir’s isotherm model. DFT calculations go along with the experimental results, signifying the potential corrosion inhibition behaviour of DMHB for MS in both the acid media.

scholarly journals Improvement in Corrosion Inhibition Efficiency of Molybdate-Based Inhibitors via Addition of Nitroethane and Zinc in Stimulated Cooling Water

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Saeed Mohammadi ◽  
Fatemeh Baghaei Ravari ◽  
Athareh Dadgarinezhad
Keyword(s):  
Electron Microscopy ◽  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Cooling Water ◽  
Ac Impedance ◽  
Uniform Corrosion ◽  
Corrosion Inhibition Efficiency ◽  
Zinc Inhibition

An investigation was conducted to improve the corrosion inhibition efficiency of molybdate-based inhibitors for mild steel which is the main construction material of cooling water systems, using nitroethane as an organic compound beside zinc. In this study a new molybdate-based inhibitor was introduced with the composition of 60 ppm molybdate, 20 ppm nitrite, 20 ppm nitroethane, and 10 ppm zinc. Inhibition efficiency of molybdate alone and with nitrite, nitroethane, and zinc on the uniform corrosion of mild steel in stimulated cooling water (SCW) was assessed by electrochemical techniques such as potentiodynamic polarization and electrochemical impedance (AC impedance) measurements. Weight loss measurements were made with coupon testing specimens in the room temperature for 48 h. Studies of electron microscopy, including scanning electron microscopy (SEM) photograph and X-ray energy dispersive spectrometry (EDS) microanalysis, were used. The results obtained from the polarization and AC impedance curves were in agreement with those from the corrosion weight loss results. The results indicate that the new inhibitor is as effective as molybdate alone, though at one-ninth of the concentration range of molybdate, which is economically favorable.

Sign in / Sign up

Export Citation Format

Share Document