scholarly journals Correlation between Inhibition Efficiency and Chemical Structure of New Indolo Imidazoline on the Corrosion of Mild Steel in Molar HCl with DFT Evidences

2015 ◽  
Vol 31 (2) ◽  
pp. 1057-1064 ◽  
Author(s):  
Sowmya Ramkumar ◽  
D Nalini
Keyword(s):  
Mild Steel ◽  
Chemical Structure ◽  
Inhibition Efficiency

SYNTHESIS, CHARACTERIZATION AND THERMAL PROPERTIES OF 2,2′-DIBENZIMIDAZOLYL BUTANE AS A NOVEL CORROSION INHIBITORS FOR MILD STEEL IN SULFURIC ACID

2019 ◽  
Vol 27 (03) ◽  
pp. 1950115 ◽  
Author(s):  
H. EL AADAD ◽  
M. GALAI ◽  
A. CHAHINE ◽  
M. EBN TOUHAMI
Keyword(s):  
Sulfuric Acid ◽  
Mild Steel ◽  
Chemical Structure ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Measurements ◽  
Transmission Electron ◽  
Corrosion Inhibition Efficiency ◽  
C Nmr

This work aims at synthesis and characterization of 2,2[Formula: see text]-dibenzimidazolyl butane as an effective corrosion inhibitor of mild steel in sulfuric acid solution. A simple and efficient method for its synthesis in described. The chemical structure and surface morphology of 2,2[Formula: see text]-dibenzimidazolyl butane were characterized by mass spectrometry (MS), Fourier transform infrared (FTIR), Raman, 1H, [Formula: see text]C NMR spectroscopy and transmission electron microscopy (TEM). Its thermal decomposition and its variation in mass was studied by thermogravimetric analysis (TGA) coupled with differential thermal analysis (DTA). The molecular mass of 2,2[Formula: see text]-dibenzimidazolyl butane was determined to be at 290[Formula: see text]g/mol and its degradation was achieved at 455∘C. Then, the corrosion inhibition efficiency of 2,2[Formula: see text]-dibenzimidazolyl butane was studied with various concentrations in 0.5 M H2SO4 solution for mild steel by the potentiodynamic polarization and the electrochemical measurements. According to the results of electrochemical impedance spectroscopy, the inhibition efficiency decreased with concentration and reached its maximum (95.5%) at 100[Formula: see text]ppm. The polarization measurements showed that the prepared inhibitor acts as a cathodic type inhibitor. The mass loss tests are in accordance with the results of electrochemical measurements.

Novel Electro Polymerization Method to Synthesized Anti-corrosion Coated Layer on Stainless Steel Surface from (N-Benzothiazolyl Maleamic Acid) and Study its Biological Activity

2018 ◽  
Vol 9 (3) ◽  
Author(s):  
Muna I Khalaf ◽  
Khulood A Saleh ◽  
Khalil S Khalil
Keyword(s):  
Stainless Steel ◽  
Chemical Structure ◽  
Inhibition Efficiency ◽  
Steel Plate ◽  
Polymeric Coating ◽  
Stainless Steel Surface ◽  
Plate Electrode ◽  
Before And After ◽  
Maleamic Acid ◽  
Polymerization Method

Electro polymerization of N-benzothiazolyl maleamic acid (NBM) was carried out on stainless steel plate electrode in a protic medium of monomer aqueous solution using electrochemical oxidation procedure in electrochemical cell.Spectroscopic characterization techniques were investigated to obtain information about the chemical structure of polymer. The anti-corrosion action of polymer was investigated on stainless steel by electrochemical polarization method. In addition, the effect of adding nanomaterial (TiO2, ZnO (bulk-nano)) to monomer solution on the corrosion behavior of stainless steel was investigated. The results obtained showed that the corrosion rate of S-steel increased with temperature increase from 293K to 323K and the values of inhibition efficiency by coating polymer increase with nanomaterial addition. Apparent energies of activation have been calculated for the corrosion process of S-steel in acidic medium before and after polymeric coating. Furthermore were studied the effect of the preparing polymer on some strain of bacteria.

Adsorption and corrosion inhibition characteristics of two medicinal molecules

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Hydrochloric Acid ◽  
Corrosion Rate ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Half Life ◽  
Thermodynamic Data ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Corrosive Environment ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition characteristics of two medicinal molecules phenylalanine and rutin on mild steel in 1.0M Hydrochloric acid were evaluated using gravimetric method. Corrosion inhibition efficiency of 83.78 and 90.40 % was obtained respectively after seven days. However, phenylalanine showed weak accumulative higher corrosion inhibition efficiency. The presence of both molecules in the corrosive environment reduced the corrosion rate constant and increased the material half-life. Thermodynamic data calculated suggests a spontaneous adsorption of the molecules on the mild steel’s surface.

scholarly journals Spilanthes acmella Leaves Extract for Corrosion Inhibition in Acid Medium

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 106
Author(s):  
Akbar Ali Samsath Begum ◽  
Raja Mohamed Abdul Vahith ◽  
Vijay Kotra ◽  
Mohammed Rafi Shaik ◽  
Abdelatty Abdelgawad ◽  
...  
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Active Sites ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Film Formation ◽  
Protective Film ◽  
Surface Protection ◽  
Tafel Polarization ◽  
Spilanthes Acmella

In the present study, the corrosion inhibition effect of Spilanthes acmella aqueous leaves extract (SA-LE) on mild steel was investigated in 1.0 M HCl solution at different temperature using weight loss, Tafel polarization, linear polarization resistance (LPR), and electrochemical impedance (EIS) measurements. Adsorption of inhibitor on the surface of the mild steel obeyed both Langmuir and Temkin adsorption isotherms. The thermodynamic and kinetic parameters were also calculated to determine the mechanism of corrosion inhibition. The inhibition efficiency was found to increase with an increase in the inhibitor concentration i.e., Spilanthes acmella aqueous leaves extract, however, the inhibition efficiency decreased with an increase in the temperature. The phytochemical constituents with functional groups including electronegative hetero atoms such as N, O, and S in the extract adsorbed on the metal surface are found responsible for the effective performance of the inhibitor, which was confirmed by Fourier-transform infrared spectroscopy (FT-IR) and ultraviolet–visible spectroscopic (UV-Vis) studies. Protective film formation against corrosion was confirmed by scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact angle studies. The result shows that the leaves extract acts as corrosion inhibitor and is able to promote surface protection by blocking active sites on the metal.

scholarly journals Protection of Mild Steel Corrosion in Sulphuric Acid Environment Using Wheat Starch

2017 ◽  
Vol 10 ◽  
pp. 11-21 ◽  
Author(s):  
Simeon C. Nwanonenyi ◽  
Okoro Ogbobe ◽  
Emeka Emmanuel Oguzie
Keyword(s):  
Mild Steel ◽  
Metal Surface ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Measurement Techniques ◽  
Steel Corrosion ◽  
Polarization Measurement ◽  
Wheat Starch ◽  
Adsorption Parameters ◽  
Acid Environment

The corrosion of mild steel in 0.5 M H2SO4acid solution and the inhibition process by wheat starch (WS) was investigated using weight loss and potentiodynamic polarization measurement techniques respectively. Gravimetric results revealed that there is significant reduction in the corrosion rate of mild steel in the presence of inhibited solution compared to blank solution, and also the inhibition efficiency was found to depend on the concentration of the WS. Data on potentiodynamic polarization results confirmed that WS exhibited mixed type inhibition behaviour, though the cathodic effect was more pronounced. The mode of WS adsorption on the corroding metal surface followed Langmuir isotherm model. In addition, the trend of inhibition efficiency with temperature, activation energy and heat of adsorption parameters revealed a strong interaction between the WS constituents and the corroding metal surface, thus indicating that WS lowered the corrosion process by blanketing the mild steel surface through chemical adsorption mechanism. The mechanism of inhibition was discussed in the light of the chemical structure of starch.

scholarly journals A Comparative Study on the Corrosion Inhibition of Mild Steel and Aluminium by Synthesized Inhibitors in Organic Acidic Medium

2020 ◽  
pp. 41-51
Author(s):  
Lalita Saini ◽  
R. K. Upadhyay
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Acidic Medium ◽  
Trichloroacetic Acid ◽  
Inhibition Efficiency ◽  
Corrosion Inhibition Efficiency ◽  
Scanning Electron Microscope Method ◽  
Scanning Electron

Mass loss and Scanning Electron Microscope method (SEM) have been used to study the corrosion inhibition efficiency on mild steel and aluminium using synthesized inhibitors i.e. N-Benzylidene aniline (CI1) and N-Benzylidene 4-methylaniline (CI2) in Trichloroacetic acid (TCAA). Study reveals that both mild steel and aluminium are prone to corrosion in organic acid like TCAA. Out of these two metals, aluminium is more vigorously corroded by the TCAA in comparison to mild steel in same conditions and synthesized inhibitors CI1 and CI2 are almost same effective for mild steel and aluminium.

Sign in / Sign up

Export Citation Format

Share Document