scholarly journals Corrosion inhibition of 1018 carbon steel with some ethoxylated fatty amides in hydrochloric acid solution

2010 ◽  
Vol 7 (1) ◽  
pp. 129-136
Author(s):  
F. M. Al-Nowaiser

The effect of three compounds of ethoxylated fatty amides with different number of ethylene oxide unit on the corrosion of 1018 carbon steel in 1M HCl has been studied using weight loss and galvanostatic polarization measurements. The percentage inhibition efficiency was found to increase with increasing concentration of inhibitor, number of ethylene oxide unit and with decreasing temperature. The inhibitive effect of these compounds was explained on the basis of adsorption on the metal surface, through their ethoxy groups. The adsorption process follows Langmuir adsorption isotherm. The effect of temperature on the rate of corrosion in the absence and presence of these compounds was also, studied. Some activated thermodynamic parameters were calculated.

2020 ◽  
pp. 1861-1873
Author(s):  
Mustafa Alaa Mohammed ◽  
Rehab Majed Kubba

The inhibition ability of the new derivative (quinolin-2-one), namely (1-{[5-(2-Chloro-phenylazo)-2- hydroy-benzylidene]-amino}-4,7-dimethyl -6-nitro- 1H-quinolin-2-one (CPHAQ2O)) towards carbon steel corrosion in (3.5% NaCl) and (0.5M HCl) solutions were evaluated by potentiodynamic polarization at different inhibitor concentrations. Polarization curves showed that the evaluated compound acted as mixed inhibitors, and the adsorption of the evaluated inhibitor obeys the Langmuir adsorption isotherm in both salt and acid solutions. The results revealed that the percentage inhibition efficiency (%IE) in the salty solution (90.55%) is greater than that in the acidic solution (77.62%). The surface changes of the carbon steel and the film persistency of the inhibitor were studied using SEM (Scanning Electron Microscopy).


2012 ◽  
Vol 9 (4) ◽  
pp. 2044-2051 ◽  
Author(s):  
Archana Saxena ◽  
Anurag Sharma ◽  
Deepti Saxena ◽  
Praveen Jain

Corrosion behavior of iron in hydrochloric acid solution was studied using weight loss as well Scanning electron microscopy study without and with clove oil. The percentage inhibition efficiency increases with increasing clove oil concentration. All the data revel that the oil acts as an excellent inhibitor for the corrosion of iron in HCl solution. Thermodynamic, kinetic parameters and equilibrium constant for adsorption process were calculated from the experimental data. The adsorption of clove oil on experimental metals was found to follow the Langmuir adsorption isotherm at all the concentration studies. Scanning electron microscope (SEM), investigations also indicate that clove oil greatly lowers the dissolution currents.


2020 ◽  
Vol 24 (4) ◽  
pp. 691-697
Author(s):  
E.P. Othaki ◽  
N.C. Ngobiri

The corrosion inhibition characteristics of Chrysophyllum albidum cotyledon extract was studied as a green and sustainable corrosion inhibitors for pipeline steel in acidic environment attemperatures, 303,313 and 323K using gravimetric technique.The results obtained showed that the inhibition efficiency increased with increase in extract concentration but decrease with increase in temperature. The extract attained an inhibition efficiency of 94 % with 5 g/L at 303 K and 52.2 % with 1 g/L at 333K. Also increase in concentration of the extract lead to increase in activation energydepicting an exothermic process.Fourier transform infrared spectroscopy (FT-IR) studies showed the mode of inhibition as adsorption of phytochemicals from the extract on pipeline steel surface. Langmuir adsorption isotherm best fitted into the adsorption process which is spontaneous and physical. Keywords: Chrysophyllum albidum, Pipeline steel, Inhibition, Adsorption.


2016 ◽  
Vol 63 (6) ◽  
pp. 470-476 ◽  
Author(s):  
Pawin Wongkhamprai ◽  
Manthana Jariyaboon

Purpose The aim of this work was to investigate how Andrographis paniculata (Burm.f.) Wall.ex Nees extract affected the corrosion of low-carbon (C) steel in 0.1M HCl. Design/methodology/approach The Andrographis paniculata (Burm.f.) Wall.ex Nees was extracted into distilled water at 70°C for 1 h. The corrosion inhibition efficiency of the extract was determined in 0.1M HCl using weight loss measurements, potentiodynamic polarization and electrochemical impedance spectroscopy. The effects of extract concentrations and of temperature were investigated. Findings The Andrographis paniculata (Burm.f.) Wall.ex Nees extract could inhibit the corrosion process of low-C steel in 0.1M HCl. With the extract concentration of 1 g/l, an inhibition efficiency of 96.3 per cent was obtained. The extract acted as an anodic inhibitor. The adsorption process of the extract was physisorption and it followed the Langmuir adsorption isotherm. Originality/value This paper revealed that Andrographis paniculata (Burm.f.) Wall.ex Nees cultivated in Thailand, which was extracted using a simple and environmentally friendly method, could act as a very good green corrosion inhibitor for low-C steel in 0.1M HCl solution.


2017 ◽  
Vol 7 (3) ◽  
pp. 145 ◽  
Author(s):  
Olamide Olawale ◽  
Adesoji Adeolu Adediran ◽  
Segun Isaac Talabi ◽  
Geraldine Chika Nwokocha ◽  
Alewo Opuada Ameh

<p class="PaperTitle"><span lang="EN-GB">This study investigates the inhibition potential of Vernonia amygdalina stem extract (VAE) on the corrosion of mild carbon steel immersed in 1 M HCl solution containing various concentrations of the inhibitor. The corrosion rate and inhibition efficiency were evaluated using mass loss and adsorption techniques. The results revealed that VAE efficiently inhibits the corrosion rate of mild carbon steel immersed in the acidic medium. The concentration of 0.6 g/L provides the highest inhibition efficiency of 78.1 %. The adsorption process was consistent with the physisorption mechanism and obeyed the Langmuir isotherm. The functional groups responsible for inhibition were identified using Fourier Transform Infrared (FTIR) spectra. The surface morphology of the corroded samples examined with Scanning Electron Microscope (SEM) revealed the presence of protective oxide layer. Inhibition efficiency was found depended on the presence of oxalate, phytate, tannins, saponins and flavonoids in the VAE. It has been concluded that VAE is safe, cheap and efficient corrosion inhibitor for mild carbon steel.</span></p>


2018 ◽  
Vol 29 (2) ◽  
pp. 103-109 ◽  
Author(s):  
Habibat Faith Chahul ◽  
Gloria Ihuoma Ndukwe ◽  
David Ogwu Ogwu

Abstract The dissolution of aluminum alloy AA 1060 in 0.5 M and 1.0 M HCl was investigated using thermometric measurements. The reaction number of the aluminum coupons varied linearly with the concentration of the acid. Addition of Napoleonaea imperialis seed extract to the dissolving aluminium coupons lowered the reaction number in both concentrations of HCl by inhibiting the dissolution process. The inhibition efficiency of Napoleonaea imperialis seed extract was enhanced to a considerable extent in the presence of iodide ions with the synergistic parameter S > 1. The adsorption of Napoleonaea imperialis extract on the aluminium surface best aligned with the Langmuir adsorption isotherm model. The values of the free energy, ΔGadsfor the adsorption process revealed the process to be spontaneous and physisorptive.


Author(s):  
A. H. EL-ASKALANY ◽  
S. I. MOSTAFA ◽  
A. M. EID

The inhibitive action of Saponinic extract of both Zygophylium album and Zygophylium Egyptian leaves which could serve as eco-friendly materials was investigated on the corrosion of N80 carbon steel in 1 M HCl solution. The techniques employed for the study were weight loss measurements. potentiodynamic polarization, electrochemical frequency modulation (EFM), and electrochemical impedance spectroscopy (EIS). The results obtained show that these extracts could serve as an effective inhibitor for N80 carbon steel. The percentage inhibition increases with increasing concentration of the inhibitor at 25 °C The percentage inhibitor efficiency above 90% was obtained at a concentration of 700 ppm for both extracts. The corrosion rates of steel and inhibitive efficiencies obtained from impedance and polarization measurements were in good agreement with those obtained from weight loss measurements. Potentiodynamic polarization studies clearly reveal that both extracts act as mixed-type inhibitors The study shows that the inhibition efficiency decreased with the temperature rise of the medium. Heat of adsorption and thermodynamic parameters and indicated that the adsorption process is mainly controlled by the physical adsorption process.


2019 ◽  
Vol 27 (06) ◽  
pp. 1950154 ◽  
Author(s):  
ILL-MIN CHUNG ◽  
VENKATESAN HEMAPRIYA ◽  
PONNUSAMY KANCHANA ◽  
NATARAJAN ARUNADEVI ◽  
SUBRAMANIAN CHITRA ◽  
...  

Eco-friendly biodegradable Rhododendron schlippenbachii (R. schlippenbachii) green inhibitors, R. schlippenbachii methanolic (RSMeOH) extract, which can effectively reduce low carbon steel corrosion rate, were investigated using weight-loss and electrochemical (electrochemical impedance spectroscopy) techniques. The inhibitors exhibited higher efficiency by retarding the corrosion process in 1[Formula: see text]M H2SO4 and the inhibition efficiency is found to be concentration dependent. The reactivity of the predominant phytochemical components of the extract are analyzed. The adsorption of inhibitors on low carbon steel is followed the Langmuir adsorption. The protective inhibitor film formed on the metal surface was confirmed by SEM and AFM techniques.


Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3013 ◽  
Author(s):  
Aisha A. Ganash

Aqueous extract solution of Mahaleb seed (ASMS) was prepared using a simple and safe method. ASMS was tested to examine its potential to act as a green corrosion inhibitor for preventing the dissolution of Carbon steel in highly concentrated corrosive 2 M H2SO4 and 2 M H3PO4 using an electrochemical polarization Tafel plot and electrochemical impedance spectroscopy. ASMS provided a slight increase in the inhibition efficiency of H3PO4 (89%) compared with H2SO4 (86%). Fourier transform infrared spectroscopy (FTIR) and electronic scanning microscopy (SEM) were used to prove that adsorption of ASMS occurred on the metal surface. The thermodynamic adsorption and thermodynamic activation parameters were calculated at a range of concentrations and temperatures. The physisorption of ASMS followed the Langmuir adsorption isotherm (R2 = 0.98). Finally, the role of ASMS as a protection mechanism was discussed.


2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
Mahmoud Abbas Ibraheem ◽  
Abd El Aziz El Sayed Fouda ◽  
Mohamed Talaat Rashad ◽  
Fawzy Nagy Sabbahy

Corrosion inhibition and adsorption behavior of two triazole derivatives on API 5L-B carbon steel in CO2-saturated 3.5% NaCl solutions was investigated using potentiodynamic polarization, EIS, and EFM techniques. Specimen surfaces were characterized using SEM, EDX, and XRD. Results show that the two compounds are mixed-type inhibitors and inhibition efficiency increases with increasing concentrations. Adsorption of the two compounds chemisorption and obeys Langmuir adsorption isotherm. Activation energy and thermodynamic parameters were calculated. Surface analyses confirm the formation of iron nitrides on the metal surface which supports results obtained from previous techniques.


Sign in / Sign up

Export Citation Format

Share Document